Difference between revisions of "NORD-50"
(created NORD-50 page) |
m (removed introduction year, wrong edit) |
||
| Line 5: | Line 5: | ||
| architecture = | | architecture = | ||
| word size = 32 bit | | word size = 32 bit | ||
| − | | year introduced = | + | | year introduced = |
| form factor = mini | | form factor = mini | ||
| physical address = 4 megabytes | | physical address = 4 megabytes | ||
Revision as of 13:06, 6 August 2017
| NORD-50 | |
| Manufacturer: | Norsk Data |
|---|---|
| Form Factor: | mini |
| Word Size: | 32 bit |
| Physical Address Size: | 4 megabytes |
The NORD-50 computer system is a completely integrated system of NORD-10/S and NORD-50 CPUs. The I/O system, file system and operating system are common to both processors.
The NORD-50 CPU was used in the ND 1100/S, ND 1200/S, ND 1300/S and ND 1400/S systems.
The NORD-50 CPU is designed to be a fast floating point processor which is a total slave to the NORD-10/S.
NORD-50 does not have an I/O system or interrupt system by itself, all I/O is done through the NORD-10/S which submits jobs to NORD-50 for execution in batches. The NORD-10 acts as a system supervisor running the operating system SINTRAN III/VS and the NORD-50 monitor.
n a NORD-50 computer system, the NORD-10/S has the following functions:
- Supervision and synchronization of the NORD-50s in the system.
- Running the operating system, SINTRAN III.
- Generating NORD-50 executable machine code via NORD-50 assembler or FORTRAN compiler.
- Being the I/O system for the NORD-50s performing I/O transfer to / from the NORD-50 memory.
The NORD-50s in the system perform execution of instructions with data supplied through the NORD-10/S I/O system from byte oriented devices such as terminals, general DMA devices such as disks and magnetic tapes, the universal DMA interface, and special high-speed DMA channels connected directly to ports in the multiport memory system.
The system architecture is such that NORD-50s can have their private memories including a high speed static memory in addition to the multiport memory system.
The NORD-50s themselves do not perform any tasks except for running the application programs.
The slave processor NORD-50 is activated by the NORD-10/S and NORD-50 executes programs in parallel with the activities in NORD-10/S. The NORD-10/S is interrupted when the NORD-50 comes to an end of its tasks.
To the NORD-10 the NORD-50 looks like any else device and is controlled via standard IOX instructions.
