Difference between revisions of "RK05 disk drive"
m (→RK05 models: better pic loc) |
(Add slide info) |
||
| Line 40: | Line 40: | ||
* RK05J - the final version | * RK05J - the final version | ||
* RK05F - a version using a permanently installed platter, which allowed it to operate at twice the track density of the standard RK05, doubling the capacity of the drive; a single RK05F emulated two normal RK05 drives | * RK05F - a version using a permanently installed platter, which allowed it to operate at twice the track density of the standard RK05, doubling the capacity of the drive; a single RK05F emulated two normal RK05 drives | ||
| + | |||
| + | ==Mounting slides== | ||
| + | |||
| + | The mounting slide DEC used was the General Devices 'Chassis Trak' C-230-S-122 (22"), which are still available (e.g. from Newark). They're somewhat pricey - the -124 (24") is slightly cheaper, and can easily be modified to fit an [[H960 rack]]. | ||
==External links== | ==External links== | ||
Revision as of 17:20, 27 October 2017
| RK05 | |
| Manufacturer: | Digital Equipment Corporation |
|---|---|
| Drive Controller(s): | RK8E (Omnibus) RK11-D (UNIBUS) RKV11-D (QBUS) |
| Capacity: | 2.45 Mbytes (most versions) |
| Transfer Rate: | 102 Kword/sec (RK8E) 90.1 Kword/sec (RK11) |
| Average Access Time: | 70 msec |
| Revolutions per Minute: | 1500 |
| 1/2 Revolution Time: | 20 msec |
| One Track Seek Time: | 10 msec |
| Average Seek Time: | 50 msec |
| Maximum Seek Time: | 85 msec |
| Total Surfaces: | 2 |
| Tracks per Surface: | 203 (nominally 200 plus 3 spares; many systems used all 203, as reliability was high) |
| Sectors per Track: | 16 (RK8E) 12 (RK11) |
| Words per Sector: | 256 |
| Tracks per Inch: | 100 |
| Density: | 2200 bpi |
| Recording Method: | Double Frequency NRZ |
| Physical Size: | 19" W x 10.5" H x 26.5" L |
| Weight: | 110 pounds |
| Power Consumption: | 230 VA (running); 1150 VA (starting, 2 sec) |
The RK05 was moving-head magnetic storage disk drive, most versions of which used removable packs. They were designed and manufactured by DEC, and based on, but not completely compatible with, the earlier RK02 and RK03 drives (which were sold by DEC, but not manufactured by them), which in turn were inspired by the IBM 2315 drive and pack.
The pack contained a platter 14 inches in diameter, coated with iron oxide. Since the disk was hard sectored (using narrow slots cut through a projecting ring in the hub), packs used in the PDP-8 were physically incompatible with those used in the PDP-11, although the drives themselves were completely identical for both.
The controller interface on the RK05 was mostly compatible with the earlier RK02/RK03, although it used a different 'drive select' mechanism, which allowed an RK11-D controller to support up to 8 RK05 drives on a single drive bus, as opposed to only 4 per bus with the earlier RK02/03 and RK11-C system. The packs were compatible.
RK05 models
- RK05E - a version which contained many reliability enhancements
- RK05J - the final version
- RK05F - a version using a permanently installed platter, which allowed it to operate at twice the track density of the standard RK05, doubling the capacity of the drive; a single RK05F emulated two normal RK05 drives
Mounting slides
The mounting slide DEC used was the General Devices 'Chassis Trak' C-230-S-122 (22"), which are still available (e.g. from Newark). They're somewhat pricey - the -124 (24") is slightly cheaper, and can easily be modified to fit an H960 rack.
