Difference between revisions of "Video terminal"
m (use cursor term) |
(+ See also) |
||
| Line 6: | Line 6: | ||
Once [[semiconductor]] [[Random Access Memory|RAM]] prices fell low enough, they were replaced with [[bit-mapped display]]s, although the latter were directly connected to the computer's main [[bus]], usually on a [[personal computer]]. | Once [[semiconductor]] [[Random Access Memory|RAM]] prices fell low enough, they were replaced with [[bit-mapped display]]s, although the latter were directly connected to the computer's main [[bus]], usually on a [[personal computer]]. | ||
| + | |||
| + | ==See also== | ||
| + | |||
| + | * [[VT52]] | ||
| + | * [[VT100]] | ||
| + | * [[ADM-3A]] | ||
| + | * [[Term-Mite ST Smart Terminal]] | ||
Revision as of 19:54, 5 June 2018
A video terminal was a device used to allow a user to do input/output to a computer; it usually communicated with the computer via asynchronous serial line. It was effectively roughly the same as the earlier printing terminals such as Teletypes, but with characters being 'painted' on a CRT via a purely electronic process, instead of being printed on paper by a mechanical system.
The original chief advantage was speed, since the all-electronic mechanism could run at much higher speeds; the disadvantage was that only a limited amount of information could be displayed at one time. (This was particularly true as early ones could only display very limited amounts of text - some as small as 12 lines of 40 characters).
Very early model provided only the same motion controls as their printing predecessors - line feed, carriage return, etc. However, the ability to move the cursor to specific screen locations was soon added, which made possible a predecessor of WYSIWYG, to wit, screen editors such as EMACS.
Once semiconductor RAM prices fell low enough, they were replaced with bit-mapped displays, although the latter were directly connected to the computer's main bus, usually on a personal computer.
