DF10 Data Channel: Difference between revisions
From Computer History Wiki
Jump to navigationJump to search
m wrong word |
Add RH10. |
||
| Line 8: | Line 8: | ||
* Transfer data to/from memory | * Transfer data to/from memory | ||
It is used with [[device controller]]s such as the [[RP10 disk controller]] | It is used with [[device controller]]s such as the [[RP10 disk controller]], [[TM10 Magnetic Tape Control]], and [[RH10 MASSBUS controller]]. | ||
{{semi-stub}} | {{semi-stub}} | ||
[[Category: DEC Storage Controllers]] | [[Category: DEC Storage Controllers]] | ||
Revision as of 04:36, 28 June 2019
The DF10 Data Channel is a channel for the early PDP-10 models (KA10 and KI10) which had the PDP-10 main memory bus as a standard bus. It can connect to multi-port memory banks either directly, or via an MX10 Memory Data Multiplexor. It is also connected to the system's I/O bus, to allow the CPU to control it.
It has limited capabilities, compared to most channels from other manufacturers: it supports only the following types of channel command words:
- End of program
- Jump to new CCW list
- Discard data
- Transfer data to/from memory
It is used with device controllers such as the RP10 disk controller, TM10 Magnetic Tape Control, and RH10 MASSBUS controller.
