Flat cable: Difference between revisions
m +cat |
m +See also |
||
| Line 1: | Line 1: | ||
A '''flat cable''' is a multi-[[conductor]] cable which is formed by effectively laying a group of insulated wires parallel to each other, and bonding them into a flat entity, like a ribbon (hence the alternative name, '''ribbon cable'''). | A '''flat cable''' is a multi-[[conductor]] cable which is formed by effectively laying a group of insulated wires parallel to each other, and bonding them into a flat planar entity, like a ribbon (hence the alternative name, '''ribbon cable'''). | ||
The main advantage of flat cables is that connectors (of the so-called Berg, DuPont, or IDC form, with pins on .100" centers) can be connected to the cable in a simple press-on manner, avoiding the need to hand-solder each wire to pins in a connector, a tremendous saving in labour. They can also be connected in the middle of the cable, for multi-drop operation. | The main advantage of flat cables is that connectors (of the so-called Berg, DuPont, or IDC form, with pins on .100" centers) can be connected to the cable in a simple press-on manner, avoiding the need to hand-solder each wire to pins in a connector, a tremendous saving in labour. They can also be connected in the middle of the cable, for multi-drop operation. | ||
| Line 6: | Line 6: | ||
The technology which has almost entirely replaced older round cables, especially inside computers; the older round cables survive in external applications, since they are typically more robust. | The technology which has almost entirely replaced older round cables, especially inside computers; the older round cables survive in external applications, since they are typically more robust. | ||
==See also== | |||
* [[Flexprint cable]] | |||
[[Category: Components]] | [[Category: Components]] | ||
Revision as of 21:11, 21 January 2020
A flat cable is a multi-conductor cable which is formed by effectively laying a group of insulated wires parallel to each other, and bonding them into a flat planar entity, like a ribbon (hence the alternative name, ribbon cable).
The main advantage of flat cables is that connectors (of the so-called Berg, DuPont, or IDC form, with pins on .100" centers) can be connected to the cable in a simple press-on manner, avoiding the need to hand-solder each wire to pins in a connector, a tremendous saving in labour. They can also be connected in the middle of the cable, for multi-drop operation.
Another advantage of flat cables is that they are usually easier to route, especially when there are a large number of conductors; a round cable with the same number is usually harder to install, especially through limited clearances.
The technology which has almost entirely replaced older round cables, especially inside computers; the older round cables survive in external applications, since they are typically more robust.
