Difference between revisions of "RS64 disk drive"

From Computer History Wiki
Jump to: navigation, search
(External links: +1)
(No PDP-8 controller, oddly)
Line 27: Line 27:
 
|}}
 
|}}
  
The RS64 is a fixed-platter [[fixed-head disk]] [[drive]] used on [[PDP-8 family|PDP-8]]'s and early [[PDP-11]]s. It could store up to 128KB of data in 64 byte blocks. It used 32 fixed read/write [[head]]s for data, and 6 heads to read timing/address [[track]]s (in two duplicated sets of 3, for reliability; switch-over from one set to another was manual).
+
The RS64 is a fixed-platter [[fixed-head disk]] [[drive]] used on early [[PDP-11]]s. (No [[PDP-8 family|PDP-8]] or other [[List of Programmable Digital Processors|early DEC system]] [[device controller]] has yet been seen for it, although the look of its Service Manual dates it to just before the early -11's.) It could store up to 128KB of data in 64 byte blocks. It used 32 fixed read/write [[head]]s for data, and 6 heads to read timing/address [[track]]s (in two duplicated sets of 3, for reliability; switch-over from one set to another was manual).
  
 
A special device had to be used to write the timing/address tracks. The drive had the ability to write-protect tracks 0-N ('N' set in switches).
 
A special device had to be used to write the timing/address tracks. The drive had the ability to write-protect tracks 0-N ('N' set in switches).
Line 33: Line 33:
 
==External links==
 
==External links==
  
* [http://www.bitsavers.org/www.computer.museum.uq.edu.au/pdf/DEC-FS-HRSMM-A-D%20RS64%20Timing%20Track%20Writer%20Maintenance%20Manual.pdf RS64 Timing Track Writer Maintenance Manual]
+
*[http://bitsavers.org/pdf/dec/disc/rs64/ Service Manuals and Engineering Drawings]
 
+
*[http://www.bitsavers.org/www.computer.museum.uq.edu.au/pdf/DEC-FS-HRSMM-A-D%20RS64%20Timing%20Track%20Writer%20Maintenance%20Manual.pdf RS64 Timing Track Writer Maintenance Manual]
  
 
[[Category: DEC Disk Drives]]
 
[[Category: DEC Disk Drives]]

Revision as of 11:53, 4 May 2021


RS64
Manufacturer: Digital Equipment Corporation
Drive Controller(s): RC11 (UNIBUS)
Capacity: 128KB
Transfer Rate: 125KB/sec (60 Hz), 100KB/sec (50 Hz)
Average Access Time: 16.9msec (60Hz), 20.3msec (50Hz)
Revolutions per Minute: ~1800 (60Hz), ~1400 (50Hz)
Media: 10" diameter nickel-cobalt plated surface with proprietary protective coating
Total Surfaces: 1
Tracks per Surface: 32
Sectors per Track: 64
Words per Sector: 32
Density: 1700 bpi (maximum)
Recording Method: NRZI
Physical Size: 10" (high), 19" (W, D)
Weight: 64 lbs
Power Consumption: 6A (starting), 2.2A (operating)


The RS64 is a fixed-platter fixed-head disk drive used on early PDP-11s. (No PDP-8 or other early DEC system device controller has yet been seen for it, although the look of its Service Manual dates it to just before the early -11's.) It could store up to 128KB of data in 64 byte blocks. It used 32 fixed read/write heads for data, and 6 heads to read timing/address tracks (in two duplicated sets of 3, for reliability; switch-over from one set to another was manual).

A special device had to be used to write the timing/address tracks. The drive had the ability to write-protect tracks 0-N ('N' set in switches).

External links