VAXstation I: Difference between revisions

Revision as of 18:29, 27 June 2022

The VAXstation I was the first VAX workstation, using the QBUS for both its main memory and I/O bus. Its CPU was the MicroVAX I; the VCB01 Video Controller provided its bit-mapped display.

This article is a stub. You can help by expanding it.

@@ Line 5: / Line 5: @@
 | Translation-buffer = 512 entries
 | Cache = 8KB
+| CPU-cycle = 250ns
+| CPU-clock = 64MHz
 | Compatibility-mode = No
 | Console-processor = CPU
@@ Line 25: / Line 27: @@
 | FPU-chip = 78132
 | CPU-technology = ZMOS
-| CPU-cycle = 200ns
-| CPU-clock = 40MHz
 | Instruction-buffer = 8 bytes
 | Console-device = None
@@ Line 36: / Line 37: @@
 }}
-The '''VAXstation I''' was the first [[VAX]] [[workstation]], using the [[QBUS]] for its [[input/output|I/O]] [[bus]]. Its [[Central Processing Unit|CPU]] was the [[MicroVAX I]]; the [[VCB01 Video Controller]] provided its [[bit-mapped display]].
+The '''VAXstation I''' was the first [[VAX]] [[workstation]], using the [[QBUS]] for both its [[main memory]] and [[input/output|I/O]] [[bus]]. Its [[Central Processing Unit|CPU]] was the [[MicroVAX I]]; the [[VCB01 Video Controller]] provided its [[bit-mapped display]].
 {{stub}}