Difference between revisions of "RP10 disk controller"
From Computer History Wiki
(An OK start) |
(No difference)
|
Revision as of 14:13, 6 November 2018
The RP10 disk controller is a disk device controller primarily for the early PDP-10 models (KA10 and KI10) which had the PDP-10 I/O bus as a standard bus.
It works with the RP01, RP02 and RP03 disk drives; up to 8 drives per controller. It uses a DF10 Data Channel unit to perform DMA to main memory.
The RP10 has the ability to perform seeks on multiple drives simultaneously.
