Border Gateway Protocol: Difference between revisions

Revision as of 00:59, 17 November 2018

The Border Gateway Protocol (usually known by its acronym BGP) is a routing protocol in the TCP/IP protocol suite; specifically, it is an EGP, used for providing the information needed for doing path selection between a connected group of Autonomous Systems.

It is a Destination Vector protocol; the data it carries are routing table entries. It detects and prevents routing loops by tagging each table entry with the complete path.

This article is not as complete coverage of the topic as it could be. You can help by expanding it.

Revision as of 00:45, 17 November 2018 view source Jnc (talk \| contribs) Administrators 19,565 edits m typo ← Older edit		Revision as of 00:59, 17 November 2018 view source Jnc (talk \| contribs) Administrators 19,565 edits m clarify Newer edit →
Line 1:		Line 1:
	The '''Border Gateway Protocol''' (usually known by its acronym '''BGP''') is a [[routing protocol]] in the [[TCP/IP]] [[protocol suite]]; specifically, it is an [[Exterior Gateway Protocol\|EGP]], used for providing the information needed for doing [[path selection]] between [[Autonomous System]]s.		The '''Border Gateway Protocol''' (usually known by its acronym '''BGP''') is a [[routing protocol]] in the [[TCP/IP]] [[protocol suite]]; specifically, it is an [[Exterior Gateway Protocol\|EGP]], used for providing the information needed for doing [[path selection]] between a connected group of [[Autonomous System]]s.

	It is a [[routing architecture\|Destination Vector]] protocol; the data it carries are [[routing table]] entries. It detects and prevents [[routing loop]]s by tagging each table entry with the complete path.		It is a [[routing architecture\|Destination Vector]] protocol; the data it carries are [[routing table]] entries. It detects and prevents [[routing loop]]s by tagging each table entry with the complete path.