Difference between revisions of "RP10 disk controller"
From Computer History Wiki
m (+cat) |
(clarify) |
||
| Line 1: | Line 1: | ||
| − | The '''RP10 disk controller''' is a [[disk]] [[device controller]] | + | The '''RP10 disk controller''' is a [[disk]] [[device controller]] for the [[PDP-10]], primarily for the early models ([[KA10]] and [[KI10]]) which had the PDP-10 [[input/output|I/O]] [[bus]] as a standard bus. |
It works with the [[RP01 disk drive|RP01]], [[RP02 disk drive|RP02]] and [[RP03 disk drive]]s; up to 8 drives per controller. It uses a [[DF10 Data Channel]] unit to perform [[Direct Memory Access|DMA]] to [[main memory]]. | It works with the [[RP01 disk drive|RP01]], [[RP02 disk drive|RP02]] and [[RP03 disk drive]]s; up to 8 drives per controller. It uses a [[DF10 Data Channel]] unit to perform [[Direct Memory Access|DMA]] to [[main memory]]. | ||
Revision as of 03:39, 18 November 2018
The RP10 disk controller is a disk device controller for the PDP-10, primarily for the early models (KA10 and KI10) which had the PDP-10 I/O bus as a standard bus.
It works with the RP01, RP02 and RP03 disk drives; up to 8 drives per controller. It uses a DF10 Data Channel unit to perform DMA to main memory.
The RP10 has the ability to perform seeks on multiple drives simultaneously.
