Difference between revisions of "RP03 disk drive"

From Computer History Wiki
Jump to: navigation, search
(Mention RP04 successor)
(Add model #)
Line 25: Line 25:
 
The '''RP03''' was the successor to the earlier [[RP02 disk drive|RP02]] multi-[[platter]] large [[disk]] drive, and the predecessor to the later [[RP04 disk drive|RP04]].
 
The '''RP03''' was the successor to the earlier [[RP02 disk drive|RP02]] multi-[[platter]] large [[disk]] drive, and the predecessor to the later [[RP04 disk drive|RP04]].
  
The actual drive was produced by the Information Storage Systems (ISS) division of Sperry Univac, and [[OEM]]'d by [[DEC]], who added interface [[electronic]]s.
+
The actual drive was produced by the Information Storage Systems (ISS) division of Sperry Univac (a model 715), and [[OEM]]'d by [[DEC]], who added interface [[electronic]]s.
  
 
A maximum of 8 drives were supported per [[device controller]].
 
A maximum of 8 drives were supported per [[device controller]].

Revision as of 23:01, 21 November 2018


RP03
Manufacturer: Sperry Univac ISS (basic drive), Digital Equipment Corporation (electronics)
Drive Controller(s): RP10 (PDP-10)
RP11 (UNIBUS)
Capacity: 41 Mbytes
Transfer Rate: 7.5 μsec/word
Average Access Time: 41.5 msec
Revolutions per Minute: 2400
1/2 Revolution Time: 12.5 msec
One Track Seek Time: 7.5 msec
Average Seek Time: 29 msec
Maximum Seek Time: 55 msec
Total Surfaces: 20
Tracks per Surface: 406 (nominally 400 plus 6 spares; many systems used all 406, as reliability was high)
Sectors per Track: 10
Words per Sector: 256
Density: 2200 bpi (maximum)
Recording Method: double frequency, NRZ
Physical Size: 30" W x 40" H x 24" L
Weight: 315 pounds
Power Consumption: 660 VA per phase (running); 3300 VA per phase(starting)


The RP03 was the successor to the earlier RP02 multi-platter large disk drive, and the predecessor to the later RP04.

The actual drive was produced by the Information Storage Systems (ISS) division of Sperry Univac (a model 715), and OEM'd by DEC, who added interface electronics.

A maximum of 8 drives were supported per device controller.