Difference between revisions of "MF20 MOS memory"
m (cat caps) |
m (→External links: +MF20 engineering drawings) |
||
| Line 8: | Line 8: | ||
* [http://www.bitsavers.org/pdf/dec/pdp10/KL10/MF20_TechMan.pdf MOS Memory Subsystem Technical Manual] (EK-0MF20-TM) | * [http://www.bitsavers.org/pdf/dec/pdp10/KL10/MF20_TechMan.pdf MOS Memory Subsystem Technical Manual] (EK-0MF20-TM) | ||
| + | * [http://bitsavers.org/pdf/dec/pdp10/KL10/MF20_schem_May78.pdf MOS Memory MF20 engineering drawings] | ||
* [http://www.bitsavers.org/pdf/dec/pdp10/KL10/MP00622_MF20_Oct82.pdf MF20 Field Maintenance Print Set] (MP00622) | * [http://www.bitsavers.org/pdf/dec/pdp10/KL10/MP00622_MF20_Oct82.pdf MF20 Field Maintenance Print Set] (MP00622) | ||
[[Category: PDP-10 Memories]] | [[Category: PDP-10 Memories]] | ||
Revision as of 16:03, 6 June 2022
The MF20 was a MOS DRAM main memory system for the later PDP-10s, principally the final KL10s (models KL10-E and KL10-R). An MF20 contained up to three storage groups, each with 256KW, for a maximum of 768KW; up to 4 MF20's could be connected to a single system, for a total of up to 3072KW.
The access time is .80 µseconds at the CPU, and the cycle time is 1.00 µseconds (both for the first word in a 4-word block). The MF20 connected to the KL10's upgraded internal memory bus, the X-Bus. ECC is provided to protect the memory contents; an MF20 44-bit word contains 36 data bits, 6 ECC bits, 1 bit of ECC parity, and 1 spare bit. The MF20 can be configured to switch the spare bit in to temporarily replace a failing bit, until the latter can be replaced
The sizes above are with 16Kx1 chips; the manual says that 64Kx1 chips would be supported, giving 1024KW for a group, but it's not clear if this was ever produced; although perhaps this was later named the MG20 MOS memory.
