Difference between revisions of "UNIBUS priority plug"
(Relatively complete) |
(+part # table) |
||
| Line 3: | Line 3: | ||
As part of the configuration of a device being added to a system, it was necessary to ensure that a priority plug for the desired priority level was installed in the device. | As part of the configuration of a device being added to a system, it was necessary to ensure that a priority plug for the desired priority level was installed in the device. | ||
| − | Priority plugs were manufactured by [[Digital Equipment Corporation|DEC]] for all four priority levels | + | Priority plugs were manufactured by [[Digital Equipment Corporation|DEC]] for all four priority levels: |
| + | |||
| + | {| class="wikitable" | ||
| + | ! Level !! [[DEC part number]] | ||
| + | |- | ||
| + | | 4 || | ||
| + | |- | ||
| + | | 5 || 54-08778 | ||
| + | |- | ||
| + | | 6 || | ||
| + | |- | ||
| + | | 7 || | ||
| + | |} | ||
| + | |||
| + | Most devices also came with a plug pre-installed at manufacturing time, at a level selected by DEC as likely the most appropriate interrupt priority level for that device; they were rarely changed. | ||
[[Category: UNIBUS]] | [[Category: UNIBUS]] | ||
Revision as of 15:56, 7 November 2022
A UNIBUS priority plug is an insertable plug, physically a DIP, which was inserted into almost all UNIBUS devices in order to select which daisy-chained interrupt bus grant line, of the four such available on the UNIBUS (BG4, BG5, BG6, and BG7), the device's grant-acquiring/passing circuitry was connected to. As a secondary purpose, it passed all the other grant lines past the device.
As part of the configuration of a device being added to a system, it was necessary to ensure that a priority plug for the desired priority level was installed in the device.
Priority plugs were manufactured by DEC for all four priority levels:
| Level | DEC part number |
|---|---|
| 4 | |
| 5 | 54-08778 |
| 6 | |
| 7 |
Most devices also came with a plug pre-installed at manufacturing time, at a level selected by DEC as likely the most appropriate interrupt priority level for that device; they were rarely changed.
