Difference between revisions of "VAXstation 100 firmware notes"
From Computer History Wiki
(Interrupt table.) |
(Keyboard test.) |
||
| Line 19: | Line 19: | ||
[[Image:VS100-interrupts.png]] | [[Image:VS100-interrupts.png]] | ||
| + | |||
| + | ==Keyboard test== | ||
| + | |||
| + | The firmware transmits code FD (hex) to the LK201 keyboard, which commands it to jump to the power-up sequence and self-test. The keyboard transmits a four-byte message back. The VS100 ignores the keyboard ID, and checks that the third is not 3D. | ||
| + | |||
| + | This information is from the VT220 Technical Manual. | ||
| + | [[Image:LK201-powerup.png]] | ||
==D0 flags== | ==D0 flags== | ||
Revision as of 20:12, 11 February 2023
Random notes from running the firmware in an emulator.
Memory map
Error LEDs
Indicates which test failed. During power-up, green light turned off. During idle loop, green light remains on.
Apparently there's a bug.
Interrupts
All VS100 interrupts use the autovector feature.
Keyboard test
The firmware transmits code FD (hex) to the LK201 keyboard, which commands it to jump to the power-up sequence and self-test. The keyboard transmits a four-byte message back. The VS100 ignores the keyboard ID, and checks that the third is not 3D.
This information is from the VT220 Technical Manual.
D0 flags
The firmware maintains a set of flags in register D0.
| Bit (decimal) | Meaning |
| 16 | Manufacturing mode. |
| 19 | Power-up error. |
| 24 | BBA done. |
| 25 | Vertical retrace interrupt. |
