Difference between revisions of "Non-removable-media disk"
(Interesting to read the patents as to why HDAs were the Right Thing) |
(No difference)
|
Revision as of 15:04, 15 August 2023
Non-removable-media disks were the generation of magnetic disk mass storage peripherals after the previously ubiquitous removable-pack disks. They used 'head/disk assemblies' (HDAs), which packaged the platters and the heads in a pre-assembled, sealed (in 'clean-room' conditions), unit. The sealed HDA was, and remains, a key step in improving the storage density (and thus capacity) of disk drives.
The technical rationale for using sealed HDAs has several parts, but an important one is as follows. To maximize storage density, the head must be 'flown' as close to the surface of the platter as possible; at such heights, even tiny dust particles can cause a head crash. If outside air is being introduced, it is difficult to filter out the smallest particles; and in any event, the filters must be replaced regularly, a maintenance headache. Sealing the HDA in a 'clean room' environment avoids these problems.
It was later discovered that filling the HDA with helium was advantageous, due to its lower density.
External links
- Magnetic disk storage apparatus - The basic sealed HDA patent
- Magnetic disk storage apparatus
- Magnetic disk information storage apparatus
- Decades of Proven Research Underpin Seagate’s Helium Drive
- DEC Head Disk Assembly (HDA)
- DEC Head Disk Assembly (HDA)
- RA81 HDA - fantastic image of a sectioned RA81 HDA
