Installing MicroVMS V4.6 on SIMH
From Computer History Wiki
Contents
Introduction
The aim of this tutorial is to show how to install VMS V4.6 on the SIMH MicroVAX simulators.
>>> All user input is formatted in bold <<<
The installation includes:
- MicroVMS V4.6 Base Kit
- All MicroVMS V4.6 Option Kits
- DECnet Software Kit
- DECnet Endnode Kit
Preparations
Suitable SIMH MicroVAX Simulators
You can choose between the following MicroVAX Models resp. SIMH simulators that are supported by VMS V4.6:
| MicroVAX Model | SIMH simulator |
|---|---|
| MicroVAX I | microvax1 |
| MicroVAX II | microvax2 |
| MicroVAX 2000 | microvax2000 |
In this tutorial I use the microvax2 SIMH simulator.
The MicroVAX II system used here consists of:
- KA630 CPU
- MS630 16 MB Memory
- DZV11 4 Line Terminal Multiplexor
- RQDX3 Disk Controller
- RD54 Disk
- TQK50 TK50 Tape Controller
- TK50 Tape Drive
- DELQA Ethernet Controller
VMS V4.6
Get the VMS V4.6 installation kit here, unzip and put it in into the directory where the SIMH simulator resides.
microvax2.ini
Use the following microvax2.ini file for a MicroVAX II system.
SET CPU 16M SET CPU CONHALT SET CPU AUTOBOOT ATT NVR NVR.BIN SET CONSOLE LOG=INSTALL_uVMS046.LOG SET RQ0 ENA SET RQ0 RD54 ATT RQ0 uVMS046.R54 SET RQ1 ENA SET RQ1 RX50 ;ATT RQ1 SET RQ2 ENA SET RQ2 RX50 ;ATT RQ2 SET RQ3 DIS SET DZ LINES=4 ATT DZ 6666 SET TQ0 ENA ATT TQ0 AQ-FP13D-BN_MICROVMS_4.6_87.tap SET TQ1 DIS SET TQ2 DIS SET TQ3 DIS SET LPT DIS SET RL DIS SET TS DIS SET XQ ENA SET XQ TYPE=DELQA ; Auto-Boot VMS EXPECT ">>> " SEND "BOOT\r"; GO -Q BOOT
Installation
Install VMS V4.6 Base Kit
Start the simh microvax2 simulator:
Windows:
run microvax2.exe
Linux:
./microvax2
Be aware that Linux is case sensitive!
The SIMH MicroVAX will automatically boot Standalone Backup from the installation tape because the disk ist still empty.
Enter the date when prompted.
KA630-A.V1.3 Performing normal system tests. 5..4..3.. Tests completed. Loading system software. 2..1..0.. VAX/VMS Version KG 15-Jun-1987 10:00 PLEASE ENTER DATE AND TIME (DD-MMM-YYYY HH:MM) 23-JUN-2022 %BACKUP-I-IDENT, Stand-alone BACKUP V4.6; the date is 23-JUN-2022 09:54:59.49 $
Enter the BACKUP command to restore the VMS V4.6 Base Kit and watch the progress:
(Mind the "." (dot) after "MICROVMS"!)
$ BACKUP/VERIFY/LOG/INITIALIZE MUA0:MICROVMS./SAVE_SET DUA0: %BACKUP-S-CREATED, created DUA0:[000000]000000.DIR;1 %BACKUP-S-CREATED, created DUA0:[000000]BACKUP.SYS;1 %BACKUP-S-CREATED, created DUA0:[000000]CONTIN.SYS;1 %BACKUP-S-CREATED, created DUA0:[000000]CORIMG.SYS;1 %BACKUP-S-CREATED, created DUA0:[000000]SYS0.DIR;1 %BACKUP-S-CREATED, created DUA0:[SYS0]MOM$SYSTEM.DIR;1 %BACKUP-S-CREATED, created DUA0:[SYS0]SYSCBI.DIR;1 %BACKUP-S-CREATED, created DUA0:[SYS0]SYSERR.DIR;1 %BACKUP-S-CREATED, created DUA0:[SYS0]SYSEXE.DIR;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]ANALYZBAD.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]AUTHORIZE.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]BACKUP.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]BADBLOCK.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]BOOTBLOCK.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]CDU.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]CHECKSUM.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]CONVERT.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]COPY.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]CREATE.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]CREATEFDL.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]DCL.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]DELETE.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]DIRECTORY.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]DISMOUNT.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]DLDRIVER.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]DUDRIVER.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]DVDRIVER.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]DZDRIVER.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]EDT.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]ERRFMT.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]ESDRIVER.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]ETDRIVER.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]F11BXQP.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]FPEMUL.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]INIT.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]INSTALL.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]JOBCTL.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]LIBRARIAN.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]LINK.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]LOGINOUT.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]MASK_IMAGE.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]MTAAACP.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]NODRIVER.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]NOTICE.TXT;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]OPCCRASH.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]OPCOM.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]PAGEFILE.SYS;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]PATCH.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]PBDRIVER.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]PDDRIVER.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]PUDRIVER.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]RECLAIM.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]RENAME.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]REPLY.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]RIGHTSLIST.DAT;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]RMS.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]RUFLOA.OPTEXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]RUNDET.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SCSLOA.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SET.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SETP0.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SETRIGHTS.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SHOW.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SHUTDOWN.COM;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SMGMAPTRM.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SORTMERGE.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]STARTUP.COM;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]STARTUP.INS;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SUMSLP.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SWAPFILE.SYS;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SYS.EXE;2 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SYS.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SYSALF.DAT;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SYSBOOT.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SYSGEN.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SYSINIT.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SYSLOA410.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SYSLOA41A.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SYSLOA41D.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SYSLOA41W.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SYSLOA650.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SYSLOA65D.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SYSLOA65W.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SYSLOA8SS.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SYSLOAUV1.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SYSLOAUV2.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SYSLOAWS1.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SYSLOAWS2.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SYSLOAWSD.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SYSUAF.DAT;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]TERMTABLE.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]TTDRIVER.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]TUDRIVER.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]TVDRIVER.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]TYPE.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]UNLOCK.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]UVDEFAULT.PAR;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]UVSTARTUP.COM;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]VAXEMUL.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]VAXVMSSYS.PAR;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]VERIFY.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]VMB.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]VMOUNT.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]VMSHELP.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]VMSPARAMS.DAT;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]WRITEBOOT.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]XDDRIVER.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]XQDRIVER.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]YEDRIVER.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]YFDRIVER.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]YIDRIVER.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0]SYSHLP.DIR;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSHLP]EDTHELP.HLB;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSHLP]EXAMPLES.DIR;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSHLP]HELPLIB.HLB;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSHLP]UAFHELP.HLB;1 %BACKUP-S-CREATED, created DUA0:[SYS0]SYSLIB.DIR;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]ADARTL.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]BASRTL.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]BASRTL2.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]CDDSHR.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]COBRTL.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]CONVSHR.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]CRFSHR.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]DBGSSISHR.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]DCLTABLES.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]DCXSHR.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]DISMNTSHR.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]DTKSHR.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]EDTSHR.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]ENCRYPSHR.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]FDLSHR.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]FORRTL.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]LBRSHR.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]LIBRTL.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]LIBRTL2.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]MOUNTSHR.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]MTHRTL.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]PASRTL.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]PLIRTL.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]RPGRTL.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]SCNRTL.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]SCRSHR.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]SECURESHR.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]SMGSHR.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]SORTSHR.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]STARLET.OLB;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]SUMSHR.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]TRACE.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]UISSHR.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]UVMTHRTL.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]VAXCRTL.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]VAXCRTLG.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]VMSRTL.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0]SYSMAINT.DIR;1 %BACKUP-S-CREATED, created DUA0:[SYS0]SYSMGR.DIR;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSMGR]ADDUSER.COM;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSMGR]ALFMAINT.COM;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSMGR]EDTINI.EDT;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSMGR]LOGIN.COM;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSMGR]MGRMENU.COM;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSMGR]SUCCESS.TXT;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSMGR]SYCONFIG.COM;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSMGR]SYLOGIN.COM;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSMGR]SYSHUTDWN.COM;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSMGR]SYSTARTUP.COM;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSMGR]VMSIMAGES.DAT;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSMGR]WELCOME.TXT;1 %BACKUP-S-CREATED, created DUA0:[SYS0]SYSMSG.DIR;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSMSG]ADAMSG.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSMSG]CLIUTLMSG.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSMSG]DBGTBKMSG.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSMSG]FILMNTMSG.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSMSG]NETWRKMSG.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSMSG]PASMSG.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSMSG]PLIMSG.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSMSG]PRGDEVMSG.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSMSG]RPGMSG.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSMSG]SCNMSG.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSMSG]SHRIMGMSG.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSMSG]SYSMGTMSG.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSMSG]SYSMSG.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSMSG]VAXCMSG.EXE;1 %BACKUP-S-CREATED, created DUA0:[SYS0]SYSTEST.DIR;1 %BACKUP-S-CREATED, created DUA0:[SYS0]SYSUPD.DIR;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSUPD]AUTOGEN.COM;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSUPD]BACKUSER.COM;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSUPD]CVTLICENSE.COM;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSUPD]LIBDECOMP.COM;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSUPD]MASK_IMAGE.CLD;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSUPD]NET046.ANS;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSUPD]PROG046.ANS;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSUPD]REMOVE.COM;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSUPD]RESTUSER.COM;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSUPD]SPKITBLD.COM;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSUPD]SWAPFILES.COM;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSUPD]SYSP046.ANS;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSUPD]USER046.ANS;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSUPD]UTIL046.ANS;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSUPD]VMSINSTAL.COM;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSUPD]VMSINSTAL.FDL;1 %BACKUP-S-CREATED, created DUA0:[SYS0.SYSUPD]VMSKITBLD.DAT;1 %BACKUP-S-CREATED, created DUA0:[000000]SYSEXE.DIR;1 %BACKUP-S-CREATED, created DUA0:[000000]USER.DIR;1 %BACKUP-S-CREATED, created DUA0:[USER]EDTINI.EDT;1 %BACKUP-S-CREATED, created DUA0:[USER]LOGIN.COM;1 %BACKUP-S-CREATED, created DUA0:[000000]VOLSET.SYS;1 %BACKUP-I-STARTVERIFY, starting verification pass %BACKUP-S-COMPARED, compared DUA0:[000000]000000.DIR;1 %BACKUP-S-COMPARED, compared DUA0:[000000]BACKUP.SYS;1 %BACKUP-S-COMPARED, compared DUA0:[000000]CONTIN.SYS;1 %BACKUP-S-COMPARED, compared DUA0:[000000]CORIMG.SYS;1 %BACKUP-S-COMPARED, compared DUA0:[000000]SYS0.DIR;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0]MOM$SYSTEM.DIR;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0]SYSCBI.DIR;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0]SYSERR.DIR;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0]SYSEXE.DIR;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]ANALYZBAD.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]AUTHORIZE.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]BACKUP.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]BADBLOCK.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]BOOTBLOCK.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]CDU.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]CHECKSUM.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]CONVERT.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]COPY.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]CREATE.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]CREATEFDL.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]DCL.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]DELETE.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]DIRECTORY.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]DISMOUNT.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]DLDRIVER.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]DUDRIVER.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]DVDRIVER.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]DZDRIVER.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]EDT.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]ERRFMT.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]ESDRIVER.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]ETDRIVER.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]F11BXQP.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]FPEMUL.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]INIT.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]INSTALL.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]JOBCTL.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]LIBRARIAN.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]LINK.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]LOGINOUT.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]MASK_IMAGE.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]MTAAACP.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]NODRIVER.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]NOTICE.TXT;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]OPCCRASH.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]OPCOM.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]PAGEFILE.SYS;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]PATCH.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]PBDRIVER.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]PDDRIVER.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]PUDRIVER.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]RECLAIM.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]RENAME.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]REPLY.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]RIGHTSLIST.DAT;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]RMS.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]RUFLOA.OPTEXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]RUNDET.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SCSLOA.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SET.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SETP0.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SETRIGHTS.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SHOW.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SHUTDOWN.COM;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SMGMAPTRM.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SORTMERGE.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]STARTUP.COM;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]STARTUP.INS;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SUMSLP.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SWAPFILE.SYS;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SYS.EXE;2 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SYS.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SYSALF.DAT;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SYSBOOT.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SYSGEN.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SYSINIT.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SYSLOA410.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SYSLOA41A.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SYSLOA41D.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SYSLOA41W.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SYSLOA650.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SYSLOA65D.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SYSLOA65W.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SYSLOA8SS.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SYSLOAUV1.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SYSLOAUV2.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SYSLOAWS1.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SYSLOAWS2.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SYSLOAWSD.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SYSUAF.DAT;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]TERMTABLE.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]TTDRIVER.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]TUDRIVER.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]TVDRIVER.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]TYPE.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]UNLOCK.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]UVDEFAULT.PAR;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]UVSTARTUP.COM;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]VAXEMUL.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]VAXVMSSYS.PAR;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]VERIFY.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]VMB.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]VMOUNT.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]VMSHELP.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]VMSPARAMS.DAT;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]WRITEBOOT.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]XDDRIVER.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]XQDRIVER.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]YEDRIVER.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]YFDRIVER.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]YIDRIVER.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0]SYSHLP.DIR;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSHLP]EDTHELP.HLB;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSHLP]EXAMPLES.DIR;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSHLP]HELPLIB.HLB;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSHLP]UAFHELP.HLB;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0]SYSLIB.DIR;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]ADARTL.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]BASRTL.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]BASRTL2.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]CDDSHR.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]COBRTL.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]CONVSHR.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]CRFSHR.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]DBGSSISHR.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]DCLTABLES.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]DCXSHR.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]DISMNTSHR.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]DTKSHR.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]EDTSHR.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]ENCRYPSHR.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]FDLSHR.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]FORRTL.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]LBRSHR.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]LIBRTL.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]LIBRTL2.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]MOUNTSHR.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]MTHRTL.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]PASRTL.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]PLIRTL.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]RPGRTL.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]SCNRTL.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]SCRSHR.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]SECURESHR.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]SMGSHR.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]SORTSHR.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]STARLET.OLB;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]SUMSHR.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]TRACE.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]UISSHR.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]UVMTHRTL.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]VAXCRTL.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]VAXCRTLG.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]VMSRTL.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0]SYSMAINT.DIR;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0]SYSMGR.DIR;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMGR]ADDUSER.COM;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMGR]ALFMAINT.COM;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMGR]EDTINI.EDT;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMGR]LOGIN.COM;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMGR]MGRMENU.COM;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMGR]SUCCESS.TXT;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMGR]SYCONFIG.COM;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMGR]SYLOGIN.COM;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMGR]SYSHUTDWN.COM;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMGR]SYSTARTUP.COM;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMGR]VMSIMAGES.DAT;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMGR]WELCOME.TXT;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0]SYSMSG.DIR;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMSG]ADAMSG.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMSG]CLIUTLMSG.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMSG]DBGTBKMSG.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMSG]FILMNTMSG.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMSG]NETWRKMSG.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMSG]PASMSG.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMSG]PLIMSG.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMSG]PRGDEVMSG.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMSG]RPGMSG.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMSG]SCNMSG.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMSG]SHRIMGMSG.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMSG]SYSMGTMSG.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMSG]SYSMSG.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMSG]VAXCMSG.EXE;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0]SYSTEST.DIR;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0]SYSUPD.DIR;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSUPD]AUTOGEN.COM;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSUPD]BACKUSER.COM;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSUPD]CVTLICENSE.COM;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSUPD]LIBDECOMP.COM;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSUPD]MASK_IMAGE.CLD;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSUPD]NET046.ANS;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSUPD]PROG046.ANS;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSUPD]REMOVE.COM;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSUPD]RESTUSER.COM;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSUPD]SPKITBLD.COM;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSUPD]SWAPFILES.COM;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSUPD]SYSP046.ANS;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSUPD]USER046.ANS;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSUPD]UTIL046.ANS;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSUPD]VMSINSTAL.COM;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSUPD]VMSINSTAL.FDL;1 %BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSUPD]VMSKITBLD.DAT;1 %BACKUP-S-COMPARED, compared DUA0:[000000]SYSEXE.DIR;1 %BACKUP-S-COMPARED, compared DUA0:[000000]USER.DIR;1 %BACKUP-S-COMPARED, compared DUA0:[USER]EDTINI.EDT;1 %BACKUP-S-COMPARED, compared DUA0:[USER]LOGIN.COM;1 %BACKUP-S-COMPARED, compared DUA0:[000000]VOLSET.SYS;1 %BACKUP-I-PROCDONE, Operation completed. Processing finished at 23-JUN-2022 09:56:03.17 If you do not want to perform another standalone BACKUP operation, use the console to halt the system. If you do want to perform another standalone BACKUP operation, ensure the standalone application volume is online and ready. Enter "YES" to continue:
Hit [CTRL + e] to stop the simulator and enter the BOOT command.
[CTRL + e] Simulation stopped, PC: 80008B1F (BRB 80008B1F) sim> BOOT
This time the system will start from the freshly installed disk, do an automatic self-configuration run using AUTOGEN and reboot:
KA630-A.V1.3
Performing normal system tests.
5..4..3..
Tests completed.
Loading system software.
2..1..0..
MicroVMS Version KG 15-Jun-1987 10:00
AUTOGEN computes the SYSGEN parameters for your configuration
and then reboots the system with the new parameters.
Once the base system is installed, install additional software in the
following order:
1. Install the mandatory update.
2. Install any or all of the MicroVMS options
(PROG, SYSP, UTIL, USER)
3. Reinstall the mandatory update.
4. Install optional software products.
You MUST install the mandatory update before you install any MicroVMS options,
and before you install optional software products.
Running AUTOGEN -- Please wait.
%AUTOGEN-I-BEGIN, GETDATA phase is beginning.
%AUTOGEN-I-NEWFILE, A new version of SYS$SYSTEM:PARAMS.DAT has been created.
You may wish to purge this file.
%AUTOGEN-I-END, GETDATA phase has successfully completed.
%AUTOGEN-I-BEGIN, GENPARAMS phase is beginning.
%AUTOGEN-I-NEWFILE, A new version of SYS$SYSTEM:SETPARAMS.DAT has been created.
You may wish to purge this file.
%AUTOGEN-I-END, GENPARAMS phase has successfully completed.
%AUTOGEN-I-BEGIN, GENFILES phase is beginning.
%AUTOGEN-I-CREATE, DISK$MICROVMS:[SYS0.SYSEXE]PAGEFILE.SYS
will be modified to hold 12800 blocks.
%SYSGEN-I-EXTENDED, DISK$MICROVMS:[SYS0.SYSEXE]PAGEFILE.SYS;1 extended
%AUTOGEN-I-CREATE, DISK$MICROVMS:[SYS0.SYSEXE]SWAPFILE.SYS
will be modified to hold 8100 blocks.
%SYSGEN-I-EXTENDED, DISK$MICROVMS:[SYS0.SYSEXE]SWAPFILE.SYS;1 extended
%AUTOGEN-I-DUMPFILE, A 32772 block dump file will be created.
%SYSGEN-I-CREATED, SYS$SYSROOT:[SYSEXE]SYSDUMP.DMP;1 created
%AUTOGEN-I-END, GENFILES phase has successfully completed.
%AUTOGEN-I-BEGIN, SETPARAMS phase is beginning.
%AUTOGEN-I-END, SETPARAMS phase has successfully completed.
%AUTOGEN-I-BEGIN, REBOOT phase is beginning.
The system is shutting down to allow the system to boot with the
generated site-specific parameters and installed images.
The system will automatically reboot after the shutdown and the
upgrade will be complete.
SHUTDOWN -- Perform an Orderly System Shutdown
%SHUTDOWN-I-BOOTCHECK, Performing reboot consistency check...
%SHUTDOWN-I-CHECKOK, Basic reboot consistency check completed
%SHUTDOWN-I-OPERATOR, This terminal is now an operator's console.
%SHUTDOWN-I-DISLOGINS, Interactive logins will now be disabled.
%SET-I-INTSET, login interactive limit = 0, current interactive value = 0
%SHUTDOWN-I-STOPQUEMAN, The queue manager will now be stopped.
SHUTDOWN message from user SYSTEM at Batch 11:57:56
The system will shut down in 0 minutes; back up soon. Please log off.
Reboot system with AUTOGENerated parameters
%SHUTDOWN-I-SITESHUT, The site-specific shutdown procedure will now be invoked.
%SHUTDOWN-I-STOPUSER, All user processes will now be stopped.
%SHUTDOWN-I-REMOVE, All installed images will now be removed.
%SHUTDOWN-I-DISMOUNT, All volumes will now be dismounted.
Loading system software.
?06 HLT INST
PC = 20050419
?15 CORRPTN
KA630-A.V1.3
Performing normal system tests.
5..4..3..
Tests completed.
Loading system software.
2..1..0..
MicroVMS Version KG 15-Jun-1987 10:00
The MicroVMS system is now executing the system startup procedure.
The MicroVMS system is now executing the site-specific startup commands.
You have successfully installed and started
the MicroVMS base kit. The system is now
ready for you to login.
%SET-I-INTSET, login interactive limit = 64, current interactive value = 0
SYSTEM job terminated at 23-JUN-1987 11:58:52.02
Welcome to MicroVMS KG
Now hit [Enter] to log in and follow the instructions to install the mandatory update.
There is no password on the SYSTEM account.
Next stop the simulator by typing [CTRL + e], then "insert" the mandatory update tape and finally type C to continue:
Username: SYSTEM
Welcome to MicroVMS V4.6
%SET-W-NOTSET, error modifying OPA0:
-SET-I-UNKTERM, unknown terminal type
------------------------------------------------
Main Menu
1 - Exit to DCL
2 - Log out of the SYSTEM account
3 - Invoke the MAIL utility
4 - Invoke the PHONE utility
5 - Add a user account to the system
6 - Install optional software
7 - Add or Delete a MicroVMS component
8 - Create or Modify an Autologin Terminal
9 - Back up or Restore the user files on a disk
10 - Build a Standalone BACKUP kit
11 - Set the maximum number of interactive logins
12 - Configure the network
13 - Shut down or start up the network
14 - SHUT DOWN the system
Enter a number (? or ?# for HELP):
[CTRL + e]
Simulation stopped, PC: 80008B1F (BRB 80008B1F)
sim> ATT TQ0 BB-KY83C-BE_VMS4.6-MUP_87.tap
TQ0: Tape Image 'BB-KY83C-BE_VMS4.6-MUP_87.tap' scanned as SIMH format
sim> C
Now choose 6 from the Main Menu to install mandatory update as follows:
6
------------------------------------------------
VAX/VMS Software Product Installation Procedure KG
It is 23-JUN-1987 at 15:35.
Enter a question mark (?) at any time for help.
* Are you satisfied with the backup of your system disk [YES]? YES
* Where will the distribution volumes be mounted: MUA0:
Enter the products to be processed from the first distribution volume set.
* Products: *
Please mount the first volume of the set on MUA0:.
* Are you ready? YES
%MOUNT-I-MOUNTED, MUP046 mounted on _MUA0:
The following products will be processed:
VMSMUP V4.6
Beginning installation of VMSMUP V4.6 at 15:36
%VMSINSTAL-I-RESTORE, Restoring product saveset A...
This kit contains the mandatory update for Version 4.6 of VAX/VMS.
It must be applied to the 4.6 base kit.
1) Apply all fixes to the system
2) Create a file with the descriptions of all fixes
3) Both of the above
* What would you like to do [3]: 3
%VMSMUP-I-FIXDESC, The fixes are described in SYS$UPDATE:VMSMUP046.TXT
* Do you want to purge files replaced by this installation [YES]? YES
%MOUNT-I-MOUNTED, MUP046 mounted on _MUA0:
%BACKUP-I-STARTVERIFY, starting verification pass
%BACKUP-W-NOFILES, no files selected from MUA0:[000000]VMSMUP046.B;
%DELETE-W-SEARCHFAIL, error searching for SYS$SYSROOT:[SYSUPD.KITINSTAL_SCRATCH]*.*;*
-RMS-E-FNF, file not found
%BACKUP-I-STARTVERIFY, starting verification pass
%BACKUP-W-NOFILES, no files selected from MUA0:[000000]VMSMUP046.C;
1) CTDRIVER (patch image)
%VMSINSTAL-W-NOFILE, File VMI$ROOT:[SYSEXE]CTDRIVER.EXE does not exist.
2) F11BXQP (new image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMSMUP046]F11BXQP.EXE;2
3) LATSYM (new image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMSMUP046]LATSYM.EXE;2
4) PEDRIVER (miscellaneous fix)
5) RMS (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMSMUP046]RMS.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMSMUP046]RMS.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMSMUP046]RMS.EXE;1
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMSMUP046]RMS.EXE;1
6) SYS (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMSMUP046]SYS.EXE;1
7) SYSLOA8NN (patch image)
%VMSINSTAL-W-NOFILE, File VMI$ROOT:[SYSEXE]SYSLOA8NN.EXE does not exist.
8) TUDRIVER (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMSMUP046]TUDRIVER.EXE;1
9) UETINIT00 (patch image)
%VMSINSTAL-W-NOFILE, File VMI$ROOT:[SYSTEST]UETINIT00.EXE does not exist.
10) VAXCRTL (miscellaneous fix)
%VMSINSTAL-W-NOFILE, File VMI$ROOT:[SYSLIB]VAXCRTL.OLB does not exist.
11) VAXCRTL (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMSMUP046]VAXCRTL.EXE;1
12) VAXCRTLG (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMSMUP046]VAXCRTLG.EXE;1
13) XQDRIVER (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMSMUP046]XQDRIVER.EXE;1
%VMSMUP-E-ERRORS, Of the 13 fixes listed above, the following 4 should be reviewed:
1, 7, 9, 10
%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...
Installation of VMSMUP V4.6 completed at 15:36
%VMSINSTAL-I-REBOOT, This product requires that the system be rebooted.
SHUTDOWN -- Perform an Orderly System Shutdown
%SHUTDOWN-I-BOOTCHECK, Performing reboot consistency check...
%SHUTDOWN-I-CHECKOK, Basic reboot consistency check completed
%SHUTDOWN-I-OPERATOR, This terminal is now an operator's console.
%SHUTDOWN-I-DISLOGINS, Interactive logins will now be disabled.
%SET-I-INTSET, login interactive limit = 0, current interactive value = 1
%SHUTDOWN-I-STOPQUEMAN, The queue manager will now be stopped.
SHUTDOWN message from user SYSTEM at _OPA0: 15:36:52
The system will shut down in 0 minutes; back up soon. Please log off.
Reboot after VMSMUP V4.6 installation.
1 terminal has been notified.
%SHUTDOWN-I-SITESHUT, The site-specific shutdown procedure will now be invoked.
%SHUTDOWN-I-STOPUSER, All user processes will now be stopped.
%SHUTDOWN-I-REMOVE, All installed images will now be removed.
%SHUTDOWN-I-DISMOUNT, All volumes will now be dismounted.
SYSTEM SHUTDOWN COMPLETE - USE CONSOLE TO HALT SYSTEM
Infinite loop, PC: 80008D7E (BRB 80008D7E)
sim>
Install MicroVMS V4.6 Option Kits
Change the tape back to the installation tape:
sim> ATT TQ0 AQ-FP13D-BN_MICROVMS_4.6_87.tap TQ0: Tape Image 'AQ-FP13D-BN_MICROVMS_4.6_87.tap' scanned as SIMH format
Boot again and log in to install all of the MicroVMS V4.6 Option Kits:
sim> BOOT
KA630-A.V1.3
Performing normal system tests.
5..4..3..
Tests completed.
Loading system software.
2..1..0..
MicroVMS Version V4.6 6-Jul-1987 17:00
The MicroVMS system is now executing the system startup procedure.
The MicroVMS system is now executing the site-specific startup commands.
%SET-I-INTSET, login interactive limit = 64, current interactive value = 0
SYSTEM job terminated at 23-JUN-1987 15:40:22.50
Welcome to MicroVMS V4.6
Username: SYSTEM
Welcome to MicroVMS V4.6
Last interactive login on Tuesday, 23-JUN-1987 15:32
%SET-W-NOTSET, error modifying OPA0:
-SET-I-UNKTERM, unknown terminal type
------------------------------------------------
Main Menu
1 - Exit to DCL
2 - Log out of the SYSTEM account
3 - Invoke the MAIL utility
4 - Invoke the PHONE utility
5 - Add a user account to the system
6 - Install optional software
7 - Add or Delete a MicroVMS component
8 - Create or Modify an Autologin Terminal
9 - Back up or Restore the user files on a disk
10 - Build a Standalone BACKUP kit
11 - Set the maximum number of interactive logins
12 - Configure the network
13 - Shut down or start up the network
14 - SHUT DOWN the system
Enter a number (? or ?# for HELP): 1
------------------------------------------------
If you wish to use the menus again, type the following:
$ @SYS$MANAGER:MGRMENU
$ @SYS$UPDATE:VMSINSTAL PROG,SYSP,USER,UTIL MUA0:
VAX/VMS Software Product Installation Procedure V4.6
It is 23-JUN-1987 at 15:44.
Enter a question mark (?) at any time for help.
* Are you satisfied with the backup of your system disk [YES]? YES
Please mount the first volume of the set on MUA0:.
* Are you ready? YES
%MOUNT-I-MOUNTED, SYSTEM mounted on _MUA0:
The following products will be processed:
PROG V4.6
SYSP V4.6
USER V4.6
UTIL V4.6
Beginning installation of PROG V4.6 at 15:45
%VMSINSTAL-I-RESTORE, Restoring product saveset A...
* Do you want to install the entire kit: YES
%VMSINSTAL-I-RESTORE, Restoring product saveset B...
%VMSINSTAL-I-RESTORE, Restoring product saveset C...
%VMSINSTAL-I-RESTORE, Restoring product saveset D...
%VMSINSTAL-I-RESTORE, Restoring product saveset E...
%VMSINSTAL-I-RESTORE, Restoring product saveset F...
%VMSINSTAL-I-RESTORE, Restoring product saveset G...
%VMSINSTAL-I-RESTORE, Restoring product saveset H...
%VMSINSTAL-I-RESTORE, Restoring product saveset I...
%VMSINSTAL-I-RESTORE, Restoring product saveset J...
%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...
Installation of PROG V4.6 completed at 15:45
Beginning installation of SYSP V4.6 at 15:45
%VMSINSTAL-I-RESTORE, Restoring product saveset A...
* Do you want to install the entire kit: YES
%VMSINSTAL-I-RESTORE, Restoring product saveset B...
%VMSINSTAL-I-RESTORE, Restoring product saveset C...
%VMSINSTAL-I-RESTORE, Restoring product saveset D...
%VMSINSTAL-I-RESTORE, Restoring product saveset E...
%VMSINSTAL-I-RESTORE, Restoring product saveset F...
%VMSINSTAL-I-RESTORE, Restoring product saveset G...
%VMSINSTAL-I-RESTORE, Restoring product saveset H...
%VMSINSTAL-I-RESTORE, Restoring product saveset I...
%VMSINSTAL-I-RESTORE, Restoring product saveset J...
%VMSINSTAL-I-RESTORE, Restoring product saveset K...
%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...
Installation of SYSP V4.6 completed at 15:45
Beginning installation of USER V4.6 at 15:45
%VMSINSTAL-I-RESTORE, Restoring product saveset A...
* Do you want to install the entire kit: YES
%VMSINSTAL-I-RESTORE, Restoring product saveset B...
%VMSINSTAL-I-RESTORE, Restoring product saveset C...
%VMSINSTAL-I-RESTORE, Restoring product saveset D...
%VMSINSTAL-I-RESTORE, Restoring product saveset E...
%VMSINSTAL-I-RESTORE, Restoring product saveset F...
%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...
Installation of USER V4.6 completed at 15:45
Beginning installation of UTIL V4.6 at 15:45
%VMSINSTAL-I-RESTORE, Restoring product saveset A...
* Do you want to install the entire kit: YES
%VMSINSTAL-I-RESTORE, Restoring product saveset B...
%VMSINSTAL-I-RESTORE, Restoring product saveset C...
%VMSINSTAL-I-RESTORE, Restoring product saveset D...
%VMSINSTAL-I-RESTORE, Restoring product saveset E...
%VMSINSTAL-I-RESTORE, Restoring product saveset F...
%VMSINSTAL-I-RESTORE, Restoring product saveset G...
%VMSINSTAL-I-RESTORE, Restoring product saveset H...
%VMSINSTAL-I-RESTORE, Restoring product saveset I...
%VMSINSTAL-I-RESTORE, Restoring product saveset J...
%VMSINSTAL-I-RESTORE, Restoring product saveset K...
%VMSINSTAL-I-RESTORE, Restoring product saveset L...
%VMSINSTAL-I-RESTORE, Restoring product saveset M...
%VMSINSTAL-I-RESTORE, Restoring product saveset N...
%VMSINSTAL-I-RESTORE, Restoring product saveset O...
%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...
Installation of UTIL V4.6 completed at 15:45
VMSINSTAL procedure done at 15:45
$
Now install the install the mandatory update for the second time.
First Change the tape back to the mandatory update tape:
[CTRL + e] Simulation stopped, PC: 80008B1F (BRB 80008B1F) sim> ATT TQ0 BB-KY83C-BE_VMS4.6-MUP_87.tap TQ0: Tape Image 'BB-KY83C-BE_VMS4.6-MUP_87.tap' scanned as SIMH format sim> C [Enter] $
Then start the update. The system will shut down when finished.
$ @SYS$UPDATE:VMSINSTAL
VAX/VMS Software Product Installation Procedure V4.6
It is 23-JUN-1987 at 15:50.
Enter a question mark (?) at any time for help.
* Are you satisfied with the backup of your system disk [YES]? YES
* Where will the distribution volumes be mounted: MUA0:
Enter the products to be processed from the first distribution volume set.
* Products: *
Please mount the first volume of the set on MUA0:.
* Are you ready? YES
%MOUNT-I-MOUNTED, MUP046 mounted on _MUA0:
The following products will be processed:
VMSMUP V4.6
Beginning installation of VMSMUP V4.6 at 15:51
%VMSINSTAL-I-RESTORE, Restoring product saveset A...
This kit contains the mandatory update for Version 4.6 of VAX/VMS.
It must be applied to the 4.6 base kit.
1) Apply all fixes to the system
2) Create a file with the descriptions of all fixes
3) Both of the above
* What would you like to do [3]: 3
%VMSMUP-I-FIXDESC, The fixes are described in SYS$UPDATE:VMSMUP046.TXT
* Do you want to purge files replaced by this installation [YES]? YES
%MOUNT-I-MOUNTED, MUP046 mounted on _MUA0:
%BACKUP-I-STARTVERIFY, starting verification pass
%BACKUP-W-NOFILES, no files selected from MUA0:[000000]VMSMUP046.B;
%DELETE-W-SEARCHFAIL, error searching for SYS$SYSROOT:[SYSUPD.KITINSTAL_SCRATCH]*.*;*
-RMS-E-FNF, file not found
%BACKUP-I-STARTVERIFY, starting verification pass
%BACKUP-W-NOFILES, no files selected from MUA0:[000000]VMSMUP046.C;
1) CTDRIVER (patch image)
%VMSINSTAL-W-NOFILE, File VMI$ROOT:[SYSEXE]CTDRIVER.EXE does not exist.
2) F11BXQP (new image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMSMUP046]F11BXQP.EXE;2
3) LATSYM (new image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMSMUP046]LATSYM.EXE;2
4) PEDRIVER (miscellaneous fix)
5) RMS (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-ECOSET, eco level 1 already set in VMI$ROOT:[SYSEXE]RMS.EXE;2
%PATCH-I-ECOSET, eco level 2 already set in VMI$ROOT:[SYSEXE]RMS.EXE;2
%PATCH-I-ECOSET, eco level 3 already set in VMI$ROOT:[SYSEXE]RMS.EXE;2
%PATCH-I-ECOSET, eco level 4 already set in VMI$ROOT:[SYSEXE]RMS.EXE;2
%VMSINSTAL-W-NOFILE, New file RMS.EXE does not exist.
6) SYS (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-ECOSET, eco level 80 already set in VMI$ROOT:[SYSEXE]SYS.EXE;3
%VMSINSTAL-W-NOFILE, New file SYS.EXE does not exist.
7) SYSLOA8NN (patch image)
%VMSINSTAL-W-NOFILE, File VMI$ROOT:[SYSEXE]SYSLOA8NN.EXE does not exist.
8) TUDRIVER (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-ECOSET, eco level 1 already set in VMI$ROOT:[SYSEXE]TUDRIVER.EXE;2
%VMSINSTAL-W-NOFILE, New file TUDRIVER.EXE does not exist.
9) UETINIT00 (patch image)
%VMSINSTAL-W-NOFILE, File VMI$ROOT:[SYSTEST]UETINIT00.EXE does not exist.
10) VAXCRTL (miscellaneous fix)
%VMSINSTAL-W-NOFILE, File VMI$ROOT:[SYSLIB]VAXCRTL.OLB does not exist.
11) VAXCRTL (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-ECOSET, eco level 1 already set in VMI$ROOT:[SYSLIB]VAXCRTL.EXE;2
%VMSINSTAL-W-NOFILE, New file VAXCRTL.EXE does not exist.
12) VAXCRTLG (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-ECOSET, eco level 1 already set in VMI$ROOT:[SYSLIB]VAXCRTLG.EXE;2
%VMSINSTAL-W-NOFILE, New file VAXCRTLG.EXE does not exist.
13) XQDRIVER (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-ECOSET, eco level 1 already set in VMI$ROOT:[SYSEXE]XQDRIVER.EXE;2
%PATCH-W-NOSYMBOL, no such symbol 'XQDRIVER'
%VMSINSTAL-W-NOFILE, New file XQDRIVER.EXE does not exist.
%VMSMUP-E-ERRORS, Of the 13 fixes listed above, the following 10 should be reviewed:
1, 5, 6, 7, 8, 9, 10, 11, 12, 13
%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...
Installation of VMSMUP V4.6 completed at 15:52
%VMSINSTAL-I-REBOOT, This product requires that the system be rebooted.
SHUTDOWN -- Perform an Orderly System Shutdown
%SHUTDOWN-I-BOOTCHECK, Performing reboot consistency check...
%SHUTDOWN-I-CHECKOK, Basic reboot consistency check completed
%SHUTDOWN-I-OPERATOR, This terminal is now an operator's console.
%SHUTDOWN-I-DISLOGINS, Interactive logins will now be disabled.
%SET-I-INTSET, login interactive limit = 0, current interactive value = 1
%SHUTDOWN-I-STOPQUEMAN, The queue manager will now be stopped.
%JBC-E-JOBQUEDIS, system job queue manager is not running
SHUTDOWN message from user SYSTEM at _OPA0: 15:52:01
The system will shut down in 0 minutes; back up soon. Please log off.
Reboot after VMSMUP V4.6 installation.
1 terminal has been notified.
%SHUTDOWN-I-SITESHUT, The site-specific shutdown procedure will now be invoked.
%SHUTDOWN-I-STOPUSER, All user processes will now be stopped.
%SHUTDOWN-I-REMOVE, All installed images will now be removed.
%SHUTDOWN-I-DISMOUNT, All volumes will now be dismounted.
SYSTEM SHUTDOWN COMPLETE - USE CONSOLE TO HALT SYSTEM
Infinite loop, PC: 80008D7E (BRB 80008D7E)
sim>
Now boot your MicroVAX II with the completely installed VMS V4.6:
sim> BOOT
KA630-A.V1.3
Performing normal system tests.
5..4..3..
Tests completed.
Loading system software.
2..1..0..
MicroVMS Version V4.6 6-Jul-1987 17:00
The MicroVMS system is now executing the system startup procedure.
The MicroVMS system is now executing the site-specific startup commands.
%SET-I-INTSET, login interactive limit = 64, current interactive value = 0
SYSTEM job terminated at 23-JUN-1987 15:54:43.84
Welcome to MicroVMS V4.6
Username: SYSTEM
Welcome to MicroVMS V4.6
Last interactive login on Tuesday, 23-JUN-1987 15:42
%SET-W-NOTSET, error modifying OPA0:
-SET-I-UNKTERM, unknown terminal type
------------------------------------------------
Main Menu
1 - Exit to DCL
2 - Log out of the SYSTEM account
3 - Invoke the MAIL utility
4 - Invoke the PHONE utility
5 - Add a user account to the system
6 - Install optional software
7 - Add or Delete a MicroVMS component
8 - Create or Modify an Autologin Terminal
9 - Back up or Restore the user files on a disk
10 - Build a Standalone BACKUP kit
11 - Set the maximum number of interactive logins
12 - Configure the network
13 - Shut down or start up the network
14 - SHUT DOWN the system
Enter a number (? or ?# for HELP): 1
------------------------------------------------
If you wish to use the menus again, type the following:
$ @SYS$MANAGER:MGRMENU
$
Now have a look at your running VMS V4.6 system:
$ SHOW SYS
VAX/VMS V4.6 on node 23-JUN-1987 15:57:08.68 Uptime 0 00:02:46
Pid Process Name State Pri I/O CPU Page flts Ph.Mem
00000020 NULL COM 0 0 0 00:02:44.82 0 0
00000021 SWAPPER HIB 16 0 0 00:00:00.00 0 0
00000024 JOB_CONTROL HIB 8 17 0 00:00:00.00 89 204
00000025 SYSTEM CUR 4 139 0 00:00:00.02 1087 170
$ SHOW MEMORY
System Memory Resources on 23-JUN-1987 15:57:25.66
Physical Memory Usage (pages): Total Free In Use Modified
Main Memory (16.00Mb) 32768 29845 2784 139
Slot Usage (slots): Total Free Resident Swapped
Process Entry Slots 27 23 4 0
Balance Set Slots 24 22 2 0
Fixed-Size Pool Areas (packets): Total Free In Use Size
Small Packet (SRP) List 74 17 57 96
I/O Request Packet (IRP) List 41 7 34 208
Large Packet (LRP) List 8 7 1 1584
Dynamic Memory Usage (bytes): Total Free In Use Largest
Nonpaged Dynamic Memory 242176 81008 161168 77248
Paged Dynamic Memory 138240 57552 80688 56864
Paging File Usage (pages): Free In Use Total
DISK$MICROVMS:[SYS0.SYSEXE]SWAPFILE.SYS 7616 480 8096
DISK$MICROVMS:[SYS0.SYSEXE]PAGEFILE.SYS 12800 0 12800
Of the physical pages in use, 2473 pages are permanently allocated to VMS.
$ SHOW DEVICES
Device Device Error Volume Free Trans Mnt
Name Status Count Label Blocks Count Cnt
DUA0: Mounted 0 MICROVMS 229662 19 1
DUA1: Online 0
DUA2: Online 0
Device Device Error Volume Free Trans Mnt
Name Status Count Label Blocks Count Cnt
MUA0: Online 0
Device Device Error
Name Status Count
OPA0: Online 0
TTA0: Online 0
TTA1: Online 0
TTA2: Online 0
TTA3: Online 0
Device Device Error
Name Status Count
PTA0: Online 1
PUA0: Online 2
XQA0: Online 0
$ SHOW DEVICE/FULL DUA0:
Disk DUA0:, device type RD54, is online, mounted, file-oriented device,
shareable, available to cluster, error logging is enabled.
Error count 0 Operations completed 923
Owner process "" Owner UIC [1,1]
Owner process ID 00000000 Dev Prot S:RWED,O:RWED,G:RWED,W:RWED
Reference count 6 Default buffer size 512
Total blocks 311200 Sectors per track 17
Total cylinders 1221 Tracks per cylinder 15
Volume label "MICROVMS" Relative volume number 0
Cluster size 2 Transaction count 19
Free blocks 229662 Maximum files allowed 66696
Extend quantity 5 Mount count 1
Mount status System Cache name "_DUA0:XQPCACHE"
Extent cache size 64 Maximum blocks in extent cache 22966
File ID cache size 64 Blocks currently in extent cache 0
Quota cache size 0 Maximum buffers in FCP cache 116
Volume status: subject to mount verification, write-through caching enabled.
$
Install and Configure DECnet
"Insert" the first DECnet diskette and start the installation:
[CTRL + e]
Simulation stopped, PC: 80008B1F (BRB 80008B1F)
sim> ATT RQ1 BL-CJ56F-BE_DECNET_MVMS_V4_BIN_RX50_1-3.rx50
RQ1: 'BL-CJ56F-BE_DECNET_MVMS_V4_BIN_RX50_1-3.rx50' Contains ODS2 File system
RQ1: Volume Name: NET01 Format: DECFILE11B Sectors In Volume: 800
sim> C
[ENTER]
$ @SYS$UPDATE:VMSINSTAL
VAX/VMS Software Product Installation Procedure V4.6
It is 23-JUN-1987 at 16:01.
Enter a question mark (?) at any time for help.
* Are you satisfied with the backup of your system disk [YES]? YES
* Where will the distribution volumes be mounted: DUA1:
Enter the products to be processed from the first distribution volume set.
* Products: *
Please mount the first volume of the set on DUA1:.
* Are you ready? YES
%MOUNT-I-MOUNTED, NET01 mounted on _DUA1:
The following products will be processed:
NET V4.6
Beginning installation of NET V4.6 at 16:01
%VMSINSTAL-I-RESTORE, Restoring product saveset A...
%BACKUP-I-READYREAD, mount volume 2 on _DUA1: for reading
Enter "YES" when ready:
Now "insert" the second DECnet diskette and continue the installation:
[CTRL + e] Simulation stopped, PC: 80008B1F (BRB 80008B1F) sim> ATT RQ1 BL-CJ57F-BE_DECNET_MVMS_V4_BIN_RX50_2-3.rx50 RQ1: 'BL-CJ57F-BE_DECNET_MVMS_V4_BIN_RX50_2-3.rx50' Contains ODS2 File system RQ1: Volume Name: NET02 Format: DECFILE11B Sectors In Volume: 800 sim> C YES * Do you want to install the entire kit: YES %VMSINSTAL-I-RESTORE, Restoring product saveset B... %VMSINSTAL-I-RESTORE, Restoring product saveset C... %VMSINSTAL-I-RESTORE, Restoring product saveset D... %BACKUP-I-READYREAD, mount volume 3 on _DUA1: for reading Enter "YES" when ready:
Now "insert" the third and last DECnet diskette and finish the installation:
[CTRL + e]
Simulation stopped, PC: 80008B1F (BRB 80008B1F)
sim> ATT RQ1 BL-CJ58F-BE_DECNET_MVMS_V4_BIN_RX50_3-3.rx50
RQ1: 'BL-CJ58F-BE_DECNET_MVMS_V4_BIN_RX50_3-3.rx50' Contains ODS2 File system
RQ1: Volume Name: NET03 Format: DECFILE11B Sectors In Volume: 800
sim> C
YES
%VMSINSTAL-I-RESTORE, Restoring product saveset E...
%VMSINSTAL-I-RESTORE, Restoring product saveset F...
%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...
Installation of NET V4.6 completed at 16:04
Enter the products to be processed from the next distribution volume set.
* Products: [CTRL + y]
*INTERRUPT*
%VMSINSTAL-F-CTRLY, Installation cancelled via CTRL/Y.
%VMSINSTAL-F-UNEXPECTED, Installation terminated due to unexpected event.
VMSINSTAL procedure done at 16:04
$
The last component you need is the DECnet Endnode keyfile, so "insert" the keyfile diskette:
[CTRL + e] Simulation stopped, PC: 80008B1F (BRB 80008B1F) sim> ATT RQ1 BL-CJ59E-BE_DECNET-VAX_END_NODE_VMS_V4_BIN_RX50.rx50 RQ1: 'BL-CJ59E-BE_DECNET-VAX_END_NODE_VMS_V4_BIN_RX50.rx50' Contains ODS2 File system RQ1: Volume Name: NETEND01 Format: DECFILE11B Sectors In Volume: 800 sim> C
Start the installation as usual:
$ @SYS$UPDATE:VMSINSTAL
VAX/VMS Software Product Installation Procedure V4.6
It is 23-JUN-1987 at 16:09.
Enter a question mark (?) at any time for help.
* Are you satisfied with the backup of your system disk [YES]? YES
* Where will the distribution volumes be mounted: DUA1:
Enter the products to be processed from the first distribution volume set.
* Products: *
Please mount the first volume of the set on DUA1:.
* Are you ready? YES
%MOUNT-I-MOUNTED, NETEND01 mounted on _DUA1:
The following products will be processed:
NETEND V4.0
Beginning installation of NETEND V4.0 at 16:09
%VMSINSTAL-I-RESTORE, Restoring product saveset A...
DECnet-VAX Endnode Key installation
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.NETEND040]NETACP.EXE;1
%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...
Installation of NETEND V4.0 completed at 16:09
Enter the products to be processed from the next distribution volume set.
* Products: [CTRL + y]
*INTERRUPT*
%VMSINSTAL-F-CTRLY, Installation cancelled via CTRL/Y.
%VMSINSTAL-F-UNEXPECTED, Installation terminated due to unexpected event.
VMSINSTAL procedure done at 16:09
$
The last step is to configure DECnet using the NETCONFIG command procedure.
I will use:
- MVII for the DECnet node name, and
- 1.1 for the DECnet address.
You can use you own values obeying the DECnet rules:
- Node name: xxxx
- Node address: yyyy
The name of the network device (here: QNA-0 for the DELQA) may differ depending on your choice of the MicroVAX model.
$ @NETCONFIG
DECnet-VAX network configuration procedure
This procedure will help you define the parameters needed to get DECnet
running on this machine. You will be shown the changes before they are
executed, in case you wish to perform them manually.
What do you want your DECnet node name to be? : MVII
What do you want your DECnet address to be? : 1.1
Do you want to operate as a router? [NO (nonrouting)]: NO
Do you want a default DECnet account? [YES]: YES
Here are the commands necessary to setup your system.
--------------------------------------------------------------------------
$ RUN SYS$SYSTEM:NCP
PURGE KNOWN OBJECTS ALL
PURGE MODULE CONFIGURATOR KNOWN CIRCUITS ALL
$ DEFINE/USER SYS$OUTPUT NL:
$ DEFINE/USER SYS$ERROR NL:
$ RUN SYS$SYSTEM:NCP ! Remove existing entry, if any
PURGE NODE 1.1 ALL
PURGE NODE MVII ALL
$ RUN SYS$SYSTEM:NCP
DEFINE EXECUTOR ADDRESS 1.1 STATE ON
DEFINE EXECUTOR NAME MVII
DEFINE EXECUTOR MAXIMUM ADDRESS 1023
DEFINE EXECUTOR TYPE NONROUTING IV
DEFINE EXECUTOR NONPRIVILEGED USER DECNET
DEFINE EXECUTOR NONPRIVILEGED PASSWORD DECNET
$ DEFINE/USER_MODE SYSUAF SYS$SYSTEM:SYSUAF.DAT
$ RUN SYS$SYSTEM:AUTHORIZE
ADD DECNET /OWNER="DECNET DEFAULT" -
/PASSWORD=DECNET -
/UIC=[376,376] /ACCOUNT=DECNET -
/DEVICE=SYS$SPECIFIC: /DIRECTORY=[DECNET] -
/PRIVILEGE=(TMPMBX,NETMBX) -
/DEFPRIVILEGE=(TMPMBX,NETMBX) -
Press RETURN to continue
[RETURN]
/FLAGS=(CAPTIVE) /LGICMD=NL: -
/NOBATCH /NOINTERACTIVE
$ CREATE/DIRECTORY SYS$SPECIFIC:[DECNET] /OWNER=[376,376]
$ RUN SYS$SYSTEM:NCP
DEFINE LINE QNA-0 STATE ON
DEFINE CIRCUIT QNA-0 STATE ON COST 4
DEFINE LOGGING MONITOR STATE ON
DEFINE LOGGING MONITOR EVENTS 0.0-9
DEFINE LOGGING MONITOR EVENTS 2.0-1
DEFINE LOGGING MONITOR EVENTS 4.2-13,15-16,18-19
DEFINE LOGGING MONITOR EVENTS 5.0-18
DEFINE LOGGING MONITOR EVENTS 128.0-4
--------------------------------------------------------------------------
Do you want to go ahead and do it? [YES]: YES
%UAF-I-ADDMSG, user record successfully added
%UAF-I-RDBADDMSGU, identifier DECNET value: [000376,000376] added to RIGHTSLIST.DAT
%UAF-I-DONEMSG, system authorization file modified
%UAF-I-RDBDONEMSG, rights database modified
%NCP-I-NMLRSP, listener response - Success
Logging sink type = monitor
%NML-I-RECADDED, Database entry added
The changes have been made.
If you have not already installed the DECnet-VAX license, then do so now.
After the license has been installed, you should invoke the procedure
SYS$MANAGER:STARTNET.COM to startup DECnet-VAX with these changes.
(If the license is already installed) Do you want DECnet started? [YES]: YES
%RUN-S-PROC_ID, identification of created process is 00000026
%RUN-S-PROC_ID, identification of created process is 00000028
$
Now let's have a look at the network and do a little testing:
$ SHOW NET
VAX/VMS Network status for local node 1.1 MVII on 23-JUN-1987 16:16:46.32
This is a nonrouting node, and does not have any network information.
The designated router for MVII is node 0 MVII.
$ SET HOST MVII
Welcome to MicroVMS V4.6
Username: SYSTEM
Welcome to MicroVMS V4.6
Last interactive login on Tuesday, 23-JUN-1987 15:55
%SET-W-NOTSET, error modifying RTA1:
-SET-I-UNKTERM, unknown terminal type
------------------------------------------------
Main Menu
1 - Exit to DCL
2 - Log out of the SYSTEM account
3 - Invoke the MAIL utility
4 - Invoke the PHONE utility
5 - Add a user account to the system
6 - Install optional software
7 - Add or Delete a MicroVMS component
8 - Create or Modify an Autologin Terminal
9 - Back up or Restore the user files on a disk
10 - Build a Standalone BACKUP kit
11 - Set the maximum number of interactive logins
12 - Configure the network
13 - Shut down or start up the network
14 - SHUT DOWN the system
Enter a number (? or ?# for HELP): 1
------------------------------------------------
If you wish to use the menus again, type the following:
$ @SYS$MANAGER:MGRMENU
$ SHOW USER
VAX/VMS Interactive Users
23-JUN-1987 16:17:24.97
Total number of interactive users = 2
Username Process Name PID Terminal
SYSTEM SYSTEM 00000025 OPA0:
SYSTEM _RTA1: 00000029 RTA1:
$ LOGOUT
SYSTEM logged out at 23-JUN-1987 16:17:35.09
%REM-S-END, control returned to node _MVII::
$
That's it!
Don't forget to run an orderly shutdown using:
@SYS$SYSTEM:SHUTDOWN
Recommended Reading
- AA-KM46A-TN MicroVMS 4.6 Installation and Operations
