Installing and Configuring MicroVMS V4.0 on a MicroVAX I

From Computer History Wiki
Revision as of 08:46, 18 July 2023 by Vaxorcist (talk | contribs) (→‎SIMH microvax1 simulator: Changed to "both simulator flavors working")
Jump to: navigation, search

The aim of this tutorial is to show how to install MicroVMS V4.0 on the SIMH DEC MicroVAX I simulator.

If you are a lucky owner of a real MicroVAX I, you can use the following instructions as well. All you've got to do additionally is write the floppy images to RX50 compatible floppies, see: Writing Floppy/Fixed Disk and Tape Images to Real Media using VMS.

MicroVMS V4.0 and the MicroVAX I computer were the very beginning of the success story of the DEC series of MicroVAX computers in 1984.

A MicroVAX I as it is used in this tutorial cost in 1984: 

 16,985$ for the base computer
  4,000$ for the additional 1MB memory, 
    900$ for the four serial lines
  1,150$ for the network adapter
  1,500$ for the MicroVMS Full System license
===============
 24,535$ Total

Preparations

Get the MicroVMS V4.0 installation floppy images from here, unpack and use the .dsk files from the dsk_files directory.

Get some additional floppy images (DECnet MicroVMS V4.0) from [tbd].

I will use shortened floppy file names (cut down to the media ID) for brevity, e.g. BL-B012B-BE.dsk instead of BL-B012B-BE MicroVMS V4.0 BIN RX50 SABACKUP 1of2.dsk

SIMH microvax1 simulator

You can use the microvax1 simulator from simh or from open-simh, as both are working by now.

microvax1.ini

; ================================================
; microvax1.ini
; ================================================
;
; KD32 CPU
; 2 MSV11-QA = 2MB Memory (or 4 MSV11-PL)
; DZV11 Four-Channel Asynchronous Serial Interface
; RQDX1 Floppy/Fixed Disk Controller
; RX50 400KB 5.25" Dual Floppy Drive
; RD52 31MB 5.25" Fixed Disk
; DEQNA Ethernet Network Adapter

SET QUIET

SET CONSOLE LOG=uVMS_gen_installed_001.log

SET CPU IDLE=VMS

; Uncomment the next line if you want a more realistic MicroVAX I speed
;SET THROTTLE 300K

SET CPU 2M
SET RQ0 RD52
att rq0 uVMS040.R52
SET RQ1 RX50
att rq1 BL-B012B-BE.dsk
SET RQ2 RX50

SET RQ3 DISABLE 

SET DZ ENABLE
SET DZ LINES=4
ATT DZ 6666

SET LPT DIS
SET RL DIS 

SET XQ ENA
SET XQ TYPE=DEQNA

BOOT RQ0

MicroVMS V4.0 Base Installation

Start the SIMH MicroVAX I Simulator

Windows: 

run microvax1.exe

Linux: 

./microvax1

Be aware that Linux is case sensitive!

Boot MicroVMS V4.0 Standalone Backup

sim> b rq1
.2..1..0.

 Version V4.0 15-SEP-1984 22:29



PLEASE ENTER DATE AND TIME (DD-MMM-YYYY  HH:MM)  12-JUL-2023 8:36

Please remove the volume "SYSTEM_1" from the console device.

Insert the standalone application volume and enter "YES" when ready: [CTRL-e]
Simulation stopped, PC: 80008B1F (BRB 80008B1F)
sim> att rq1 BL-B013B-BE.dsk
sim> c
yes

Resuming load operation on volume "BACKUP", please stand by . . .


%BACKUP-I-IDENT, Stand-alone BACKUP V4.0; the date is 12-JUL-2023 08:36:18.97
$

Restore MicroVMS V4.0 BASE Saveset

$ [CTRL-e]
Simulation stopped, PC: 80008B1F (BRB 80008B1F)
sim> att rq2 BL-B001B-BE.dsk
sim> c
[ENTER]
 $ backup/log/verify/init dua2:microvms/save dua0:

%BACKUP-S-CREATED, created DUA0:[000000]000000.DIR;1
%BACKUP-S-CREATED, created DUA0:[000000]BACKUP.SYS;1
%BACKUP-S-CREATED, created DUA0:[000000]CONTIN.SYS;1
%BACKUP-S-CREATED, created DUA0:[000000]CORIMG.SYS;1
%BACKUP-S-CREATED, created DUA0:[000000]SYS0.DIR;1
%BACKUP-S-CREATED, created DUA0:[SYS0]SYSCBI.DIR;1
%BACKUP-S-CREATED, created DUA0:[SYS0]SYSERR.DIR;1
%BACKUP-S-CREATED, created DUA0:[SYS0]SYSEXE.DIR;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]ANALYZBAD.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]AUTHORIZE.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]BACKUP.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]BADBLOCK.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]CDU.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]CHECKSUM.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]CONVERT.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]COPY.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]CREATE.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]CREATEFDL.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]CVTNAF.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]CVTUAF.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]DCL.EXE;1
%BACKUP-I-STARTVERIFY, starting verification pass
%BACKUP-S-COMPARED, compared DUA0:[000000]000000.DIR;1
%BACKUP-S-COMPARED, compared DUA0:[000000]BACKUP.SYS;1
%BACKUP-S-COMPARED, compared DUA0:[000000]CONTIN.SYS;1
%BACKUP-S-COMPARED, compared DUA0:[000000]CORIMG.SYS;1
%BACKUP-S-COMPARED, compared DUA0:[000000]SYS0.DIR;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0]SYSCBI.DIR;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0]SYSERR.DIR;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0]SYSEXE.DIR;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]ANALYZBAD.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]AUTHORIZE.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]BACKUP.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]BADBLOCK.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]CDU.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]CHECKSUM.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]CONVERT.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]COPY.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]CREATE.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]CREATEFDL.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]CVTNAF.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]CVTUAF.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]DCL.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]DELETE.EXE;1
%BACKUP-I-RESUME, resuming operation on volume 2
%BACKUP-I-READYREAD, mount volume 2 on _SABKUP$DUA2: for reading
Enter "YES" when ready: [CTRL-e]
Simulation stopped, PC: 80008B1F (BRB 80008B1F)
sim> att rq2 BL-B002B-BE.dsk
sim> c
yes

%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]DELETE.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]DIRECTORY.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]DISMOUNT.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]DLDRIVER.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]DUDRIVER.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]DZDRIVER.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]EDT.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]ERRFMT.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]F11BXQP.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]FPEMUL.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]INIT.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]INSTALL.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]JOBCTL.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]LIBRARIAN.EXE;1
%BACKUP-I-STARTVERIFY, starting verification pass
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]DELETE.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]DIRECTORY.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]DISMOUNT.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]DLDRIVER.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]DUDRIVER.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]DZDRIVER.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]EDT.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]ERRFMT.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]F11BXQP.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]FPEMUL.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]INIT.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]INSTALL.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]JOBCTL.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]LIBRARIAN.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]LINK.EXE;1
%BACKUP-I-RESUME, resuming operation on volume 3
%BACKUP-I-READYREAD, mount volume 3 on _SABKUP$DUA2: for reading
Enter "YES" when ready: [CTRL-e]
Simulation stopped, PC: 80008B1F (BRB 80008B1F)
sim> att rq2 BL-B003B-BE.dsk
sim> c
yes

%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]LINK.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]LOGINOUT.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]MODPARAMS.DAT;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]NOTICE.TXT;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]OPCCRASH.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]OPCOM.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]PAGEFILE.SYS;1systemctl daemon-reload
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]PATCH.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]PUDRIVER.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]RECLAIM.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]RENAME.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]REPLY.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]RIGHTSLIST.DAT;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]RMS.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]RUNDET.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SCSLOA.EXE;1
%BACKUP-I-STARTVERIFY, starting verification pass
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]LINK.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]LOGINOUT.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]MODPARAMS.DAT;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]NOTICE.TXT;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]OPCCRASH.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]OPCOM.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]PAGEFILE.SYS;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]PATCH.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]PUDRIVER.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]RECLAIM.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]RENAME.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]REPLY.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]RIGHTSLIST.DAT;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]RMS.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]RUNDET.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SCSLOA.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SET.EXE;1
%BACKUP-I-RESUME, resuming operation on volume 4
%BACKUP-I-READYREAD, mount volume 4 on _SABKUP$DUA2: for reading
Enter "YES" when ready: [CTRL-e]
Simulation stopped, PC: 80008B1F (BRB 80008B1F)
sim> att rq2 BL-B004B-BE.dsk
sim> c
yes

%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SET.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SETP0.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SETSHOACL.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SHOW.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SHUTDOWN.COM;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SMGMAPTRM.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SORTMERGE.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]STARTUP.COM;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SUMSLP.EXE;1
%BACKUP-I-STARTVERIFY, starting verification pass
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SET.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SETP0.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SETSHOACL.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SHOW.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SHUTDOWN.COM;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SMGMAPTRM.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SORTMERGE.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]STARTUP.COM;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SUMSLP.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SYS.EXE;2
%BACKUP-I-RESUME, resuming operation on volume 5
%BACKUP-I-READYREAD, mount volume 5 on _SABKUP$DUA2: for reading
Enter "YES" when ready: [CTRL-e]
Simulation stopped, PC: 80008B1F (BRB 80008B1F)
sim> att rq2 BL-B005B-BE.dsk
sim> c
yes

%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SYS.EXE;2
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SYSALF.DAT;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SYSBOOT.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SYSGEN.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SYSINIT.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SYSLOAUV1.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SYSLOAWS1.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]SYSUAF.DAT;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]TERMTABLE.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]TTDRIVER.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]TYPE.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]UNLOCK.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]UVSTARTUP.COM;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]VAXEMUL.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]VAXVMSSYS.PAR;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]VERIFY.EXE;1
%BACKUP-I-STARTVERIFY, starting verification pass
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SYS.EXE;2
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SYSALF.DAT;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SYSBOOT.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SYSGEN.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SYSINIT.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SYSLOAUV1.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SYSLOAWS1.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]SYSUAF.DAT;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]TERMTABLE.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]TTDRIVER.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]TYPE.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]UNLOCK.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]UVSTARTUP.COM;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]VAXEMUL.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]VAXVMSSYS.PAR;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]VERIFY.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]VMOUNT.EXE;1
%BACKUP-I-RESUME, resuming operation on volume 6
%BACKUP-I-READYREAD, mount volume 6 on _SABKUP$DUA2: for reading
Enter "YES" when ready: [CTRL-e]
Simulation stopped, PC: 80008B1F (BRB 80008B1F)
sim> att rq2 BL-B006B-BE.dsk
sim> c
yes

%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]VMOUNT.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]VMSHELP.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSEXE]YFDRIVER.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0]SYSHLP.DIR;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSHLP]EDTHELP.HLB;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSHLP]EXAMPLES.DIR;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSHLP]HELPLIB.HLB;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSHLP]UAFHELP.HLB;1
%BACKUP-S-CREATED, created DUA0:[SYS0]SYSLIB.DIR;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]BASRTL.EXE;1
%BACKUP-I-STARTVERIFY, starting verification pass
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]VMOUNT.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]VMSHELP.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSEXE]YFDRIVER.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0]SYSHLP.DIR;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSHLP]EDTHELP.HLB;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSHLP]EXAMPLES.DIR;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSHLP]HELPLIB.HLB;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSHLP]UAFHELP.HLB;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0]SYSLIB.DIR;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]BASRTL.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]BASRTL2.EXE;1
%BACKUP-I-RESUME, resuming operation on volume 7
%BACKUP-I-READYREAD, mount volume 7 on _SABKUP$DUA2: for reading
Enter "YES" when ready: [CTRL-e]
Simulation stopped, PC: 80008B1F (BRB 80008B1F)
sim> att rq2 BL-B007B-BE.dsk
sim> c
yes

%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]BASRTL2.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]CDDSHR.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]COBRTL.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]CONVSHR.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]CRFSHR.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]DBGSSISHR.EXE;1
%BACKUP-I-STARTVERIFY, starting verification pass
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]BASRTL2.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]CDDSHR.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]COBRTL.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]CONVSHR.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]CRFSHR.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]DBGSSISHR.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]DCLTABLES.EXE;1
%BACKUP-I-RESUME, resuming operation on volume 8
%BACKUP-I-READYREAD, mount volume 8 on _SABKUP$DUA2: for reading
Enter "YES" when ready: [CTRL-e]
Simulation stopped, PC: 80008B1F (BRB 80008B1F)
sim> att rq2 BL-B008B-BE.dsk
sim> c
yes

%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]DCLTABLES.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]DCXSHR.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]DISMNTSHR.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]EDTSHR.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]ENCRYPSHR.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]FDLSHR.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]FORRTL.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]LBRSHR.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]LIBRTL.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]LIBRTL2.EXE;1
%BACKUP-I-STARTVERIFY, starting verification pass
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]DCLTABLES.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]DCXSHR.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]DISMNTSHR.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]EDTSHR.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]ENCRYPSHR.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]FDLSHR.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]FORRTL.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]LBRSHR.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]LIBRTL.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]LIBRTL2.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]MOUNTSHR.EXE;1
%BACKUP-I-RESUME, resuming operation on volume 9
%BACKUP-I-READYREAD, mount volume 9 on _SABKUP$DUA2: for reading
Enter "YES" when ready: [CTRL-e]
Simulation stopped, PC: 80008B1F (BRB 80008B1F)
sim> att rq2 BL-B009B-BE.dsk
sim> c
yes

%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]MOUNTSHR.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]MTHRTL.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]PASRTL.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]PLIRTL.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]RPGRTL.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]SCRSHR.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]SECURESHR.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]SMGSHR.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]SORTSHR.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]STARLET.OLB;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]SUMSHR.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]TRACE.EXE;1
%BACKUP-I-STARTVERIFY, starting verification pass
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]MOUNTSHR.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]MTHRTL.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]PASRTL.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]PLIRTL.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]RPGRTL.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]SCRSHR.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]SECURESHR.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]SMGSHR.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]SORTSHR.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]STARLET.OLB;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]SUMSHR.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]TRACE.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]UVMTHRTL.EXE;1
%BACKUP-I-RESUME, resuming operation on volume 10
%BACKUP-I-READYREAD, mount volume 10 on _SABKUP$DUA2: for reading
Enter "YES" when ready: [CTRL-e]
Simulation stopped, PC: 80008B1F (BRB 80008B1F)
sim> att rq2 BL-B010B-BE.dsk
sim> c
yes

%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]UVMTHRTL.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSLIB]VMSRTL.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0]SYSMAINT.DIR;1
%BACKUP-S-CREATED, created DUA0:[SYS0]SYSMGR.DIR;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSMGR]ADDUSER.COM;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSMGR]ALFMAINT.COM;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSMGR]EDTINI.EDT;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSMGR]LOGIN.COM;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSMGR]SUCCESS.TXT;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSMGR]SYCONFIG.COM;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSMGR]SYLOGIN.COM;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSMGR]SYSHUTDWN.COM;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSMGR]SYSTARTUP.COM;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSMGR]VMSIMAGES.DAT;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSMGR]WELCOME.TXT;1
%BACKUP-S-CREATED, created DUA0:[SYS0]SYSMSG.DIR;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSMSG]CLIUTLMSG.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSMSG]DBGTBKMSG.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSMSG]FILMNTMSG.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSMSG]NETWRKMSG.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSMSG]PASMSG.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSMSG]PLIMSG.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSMSG]PRGDEVMSG.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSMSG]RPGMSG.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSMSG]SHRIMGMSG.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSMSG]SYSMGTMSG.EXE;1
%BACKUP-I-STARTVERIFY, starting verification pass
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]UVMTHRTL.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSLIB]VMSRTL.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0]SYSMAINT.DIR;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0]SYSMGR.DIR;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMGR]ADDUSER.COM;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMGR]ALFMAINT.COM;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMGR]EDTINI.EDT;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMGR]LOGIN.COM;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMGR]SUCCESS.TXT;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMGR]SYCONFIG.COM;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMGR]SYLOGIN.COM;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMGR]SYSHUTDWN.COM;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMGR]SYSTARTUP.COM;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMGR]VMSIMAGES.DAT;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMGR]WELCOME.TXT;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0]SYSMSG.DIR;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMSG]CLIUTLMSG.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMSG]DBGTBKMSG.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMSG]FILMNTMSG.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMSG]NETWRKMSG.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMSG]PASMSG.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMSG]PLIMSG.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMSG]PRGDEVMSG.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMSG]RPGMSG.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMSG]SHRIMGMSG.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMSG]SYSMGTMSG.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMSG]SYSMSG.EXE;1
%BACKUP-I-RESUME, resuming operation on volume 11
%BACKUP-I-READYREAD, mount volume 11 on _SABKUP$DUA2: for reading
Enter "YES" when ready: [CTRL-e]
Simulation stopped, PC: 80008B1F (BRB 80008B1F)
sim> att rq2 BL-B011B-BE.dsk
sim> c
yes

%BACKUP-S-CREATED, created DUA0:[SYS0.SYSMSG]SYSMSG.EXE;1
%BACKUP-S-CREATED, created DUA0:[SYS0]SYSTEST.DIR;1
%BACKUP-S-CREATED, created DUA0:[SYS0]SYSUPD.DIR;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSUPD]AUTOGEN.COM;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSUPD]BACKUSER.COM;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSUPD]CVTNAF.COM;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSUPD]CVTUAF.COM;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSUPD]LIBDECOMP.COM;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSUPD]REMOVE.COM;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSUPD]RESTUSER.COM;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSUPD]SPKITBLD.COM;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSUPD]SWAPFILES.COM;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSUPD]VMSINSTAL.COM;1
%BACKUP-S-CREATED, created DUA0:[SYS0.SYSUPD]VMSKITBLD.DAT;1
%BACKUP-S-CREATED, created DUA0:[000000]SYSEXE.DIR;1
%BACKUP-S-CREATED, created DUA0:[000000]USER.DIR;1
%BACKUP-S-CREATED, created DUA0:[USER]EDTINI.EDT;1
%BACKUP-S-CREATED, created DUA0:[USER]LOGIN.COM;1
%BACKUP-S-CREATED, created DUA0:[000000]VOLSET.SYS;1
%BACKUP-I-STARTVERIFY, starting verification pass
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSMSG]SYSMSG.EXE;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0]SYSTEST.DIR;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0]SYSUPD.DIR;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSUPD]AUTOGEN.COM;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSUPD]BACKUSER.COM;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSUPD]CVTNAF.COM;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSUPD]CVTUAF.COM;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSUPD]LIBDECOMP.COM;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSUPD]REMOVE.COM;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSUPD]RESTUSER.COM;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSUPD]SPKITBLD.COM;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSUPD]SWAPFILES.COM;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSUPD]VMSINSTAL.COM;1
%BACKUP-S-COMPARED, compared DUA0:[SYS0.SYSUPD]VMSKITBLD.DAT;1
%BACKUP-S-COMPARED, compared DUA0:[000000]SYSEXE.DIR;1
%BACKUP-S-COMPARED, compared DUA0:[000000]USER.DIR;1
%BACKUP-S-COMPARED, compared DUA0:[USER]EDTINI.EDT;1
%BACKUP-S-COMPARED, compared DUA0:[USER]LOGIN.COM;1
%BACKUP-S-COMPARED, compared DUA0:[000000]VOLSET.SYS;1
%BACKUP-I-IDENT, Stand-alone BACKUP V4.0; the date is 12-JUL-2023 08:37:33.85
$ [CTRL-e]
Simulation stopped, PC: 80008B1F (BRB 80008B1F)
sim> exit
Goodbye
Log file closed

Apply Mandatory Update

sim> b rq0
.2..1..0.

  MicroVMS Version V4.0 15-SEP-1984 22:29   


PLEASE ENTER DATE AND TIME (DD-MMM-YYYY  HH:MM)  12-JUL-2023 8:40

The MicroVMS system is now executing the site-specific startup commands.


        You have successfully installed and started 
        the MicroVMS base kit.  The system is now
        ready for you to login.

%SET-I-INTSET, login interactive limit = 64, current interactive value = 0
  SYSTEM       job terminated at 12-JUL-2023 08:40:19.69


        Welcome to MicroVMS V4.0


Username: SYSTEM

        Welcome to MicroVMS V4.0


%SET-W-NOTSET, error modifying OPA0:
-SET-I-UNKTERM, unknown terminal type

 $ [CTRL-e]
Simulation stopped, PC: 80008B1F (BRB 80008B1F)
sim> att rq1 BL-DZ13A-BE.dsk
sim> c


 $ @sys$update:vmsinstal


        VAX/VMS Software Product Installation Procedure V4.0


It is 12-JUL-2023 at 08:40.
Enter a question mark (?) at any time for help.

* Are you satisfied with the backup of your system disk [YES]? yes
* Where will the distribution volumes be mounted: dua1:

Enter the products to be processed from the first distribution volume set.
* Products: *

Please mount the first volume of the set on DUA1: 
* Are you ready? yes

%MOUNT-I-MOUNTED, VMSMUP04001  mounted on _DUA1:

The following products will be processed:

  VMSMUP V4.0


        Beginning installation of VMSMUP V4.0 at 08:41

%VMSINSTAL-I-RESTORE, Restoring product saveset A...


This is the mandatory update for MicroVMS V4.0



        1)  Apply all fixes to the system
        2)  Create a file with the descriptions of all fixes
        3)  Both of the above

* What would you like to do [3]: 3

%VMSMUP-I-FIXDESC, The fixes are described in SYS$UPDATE:VMSMUP040.TXT
* Do you want to purge files replaced by this installation [YES]? yes

%MOUNT-I-WRITELOCK, volume is write locked
%MOUNT-I-MOUNTED, VMSMUP04001  mounted on _DUA1:
%BACKUP-S-CREATED, created VMI$ROOT:[SYSUPD.VMSMUP040]DCL.VUP;1
%BACKUP-S-CREATED, created VMI$ROOT:[SYSUPD.VMSMUP040]F11BXQP.VUP;2
%BACKUP-S-CREATED, created VMI$ROOT:[SYSUPD.VMSMUP040]JOBCTL.VUP;1
%BACKUP-S-CREATED, created VMI$ROOT:[SYSUPD.VMSMUP040]SYS.VUP;1
%BACKUP-I-STARTVERIFY, starting verification pass
%BACKUP-S-COMPARED, compared VMI$ROOT:[SYSUPD.VMSMUP040]DCL.VUP;1
%BACKUP-S-COMPARED, compared VMI$ROOT:[SYSUPD.VMSMUP040]F11BXQP.VUP;2
%BACKUP-S-COMPARED, compared VMI$ROOT:[SYSUPD.VMSMUP040]JOBCTL.VUP;1
%BACKUP-S-COMPARED, compared VMI$ROOT:[SYSUPD.VMSMUP040]SYS.VUP;1
%BACKUP-S-CREATED, created VMI$ROOT:[SYSUPD.VMSMUP040]NETACP.VUP;4
%BACKUP-I-STARTVERIFY, starting verification pass
%BACKUP-S-COMPARED, compared VMI$ROOT:[SYSUPD.VMSMUP040]NETACP.VUP;4
%BACKUP-S-CREATED, created SYS$SYSROOT:[SYSUPD]UPDKIT040.TXT;1
%BACKUP-I-STARTVERIFY, starting verification pass
%BACKUP-S-COMPARED, compared SYS$SYSROOT:[SYSUPD]UPDKIT040.TXT;1

 1) DCL (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMSMUP040]DCL.EXE;1

 2) F11BXQP (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMSMUP040]F11BXQP.EXE;1

 3) JOBCTL (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMSMUP040]JOBCTL.EXE;1

 4) NETACP (patch image)
%VMSINSTAL-W-NOFILE, File VMI$ROOT:[SYSEXE]NETACP.EXE does not exist.

 5) SYS (patch image)
%PATCH-I-NOLCL, image does not contain local symbols
%PATCH-I-NOGBL, some or all global symbols not accessible
%PATCH-I-WRTFIL, updating image file VMI$ROOT:[SYSUPD.VMSMUP040]SYS.EXE;1

%VMSMUP-E-ERRORS, Of the 5 fixes listed above, the following 1 should be reviewed:
    4
%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...

        Installation of VMSMUP V4.0 completed at 08:41

%VMSINSTAL-I-REBOOT, This product requires that the system be rebooted.


        SHUTDOWN -- Perform an Orderly System Shutdown


%SHUTDOWN-I-BOOTCHECK, Performing reboot consistency check...
%SHUTDOWN-I-CHECKOK, Basic reboot consistency check completed

%SHUTDOWN-I-OPERATOR, This terminal is now an operator's console.
%SHUTDOWN-I-DISLOGINS, Interactive logins will now be disabled.
%SET-I-INTSET, login interactive limit = 0, current interactive value = 1
%SHUTDOWN-I-STOPQUEMAN, The queue manager will now be stopped.

SHUTDOWN message on SALONE from user SYSTEM at _SALONE$OPA0:   08:41:29
SALONE will shut down in 0 minutes; back up soon.  Please log off node SALONE.
Reboot after VMSMUP V4.0 installation.

1 terminal has been notified on SALONE.

%SHUTDOWN-I-SITESHUT, The site-specific shutdown procedure will now be invoked.
%SHUTDOWN-I-STOPUSER, All user processes will now be stopped.
%SHUTDOWN-I-REMOVE, All installed images will now be removed.
%SHUTDOWN-I-DISMOUNT, All volumes will now be dismounted.

  
       SYSTEM SHUTDOWN COMPLETE - USE CONSOLE TO HALT SYSTEM
  
Infinite loop, PC: 80008D7E (BRB 80008D7E)
sim> exit

Boot Finished Base Installation

b rq0
.2..1..0.
  

  MicroVMS Version V4.0 15-SEP-1984 22:29
  

PLEASE ENTER DATE AND TIME (DD-MMM-YYYY  HH:MM)  12-JUL-2023 8:44

The MicroVMS system is now executing the site-specific startup commands.

%SET-I-INTSET, login interactive limit = 64, current interactive value = 0
  SYSTEM       job terminated at 12-JUL-2023 08:44:11.84


        Welcome to MicroVMS V4.0


Username: SYSTEM

        Welcome to MicroVMS V4.0

    Last interactive login on Wednesday, 12-JUL-2023 08:40

%SET-W-NOTSET, error modifying OPA0:
-SET-I-UNKTERM, unknown terminal type

 $ show sys

VAX/VMS V4.0  on node  12-JUL-2023 08:44:31.93   Uptime    0 00:01:41
  Pid    Process Name    State  Pri      I/O       CPU       Page flts Ph.Mem
00000010 NULL            COM      0        0   0 00:01:39.59         0      0   
00000011 SWAPPER         HIB     16        017-NOV-1858 00:0         0      0   
00000014 JOB_CONTROL     HIB      8       17   0 00:00:00.01        83    185   
00000015 SYSTEM          CUR      4       82   0 00:00:00.07       537    151   

 $ sh dev

Device                  Device           Error    Volume         Free  Trans Mnt
 Name                   Status           Count     Label        Blocks Count Cnt
SALONE$DUA0:            Mounted              0  MICROVMS         46618    19   1
SALONE$DUA1:            Online               0
SALONE$DUA2:            Online               0

Device                  Device           Error
 Name                   Status           Count
OPA0:                   Online               0
TTA0:                   Online               0
TTA1:                   Online               0
TTA2:                   Online               0
TTA3:                   Online               0

Device                  Device           Error
 Name                   Status           Count
PUA0:                   Online               1

 $ sh mem

              System Memory Resources on 12-JUL-2023 08:44:48.72

Physical Memory Usage (pages):     Total        Free      In Use    Modified
  Main Memory (2.00Mb)              4096        2589        1398         109

Slot Usage (slots):                Total        Free    Resident     Swapped
  Process Entry Slots                 12           8           4           0
  Balance Set Slots                   10           8           2           0

Fixed-Size Pool Areas (packets):   Total        Free      In Use        Size
  Small Packet (SRP) List             60          12          48          96
  I/O Request Packet (IRP) List       44           9          35         208
  Large Packet (LRP) List              8           4           4         656

Dynamic Memory Usage (bytes):      Total        Free      In Use     Largest
  Nonpaged Dynamic Memory         119808       45856       73952       42608
  Paged Dynamic Memory             69632        4784       64848        4128

Paging File Usage (pages):                      Free      In Use       Total
  DISK$MICROVMS:[SYS0.SYSEXE]PAGEFILE.SYS       4216         384        4600

Of the physical pages in use, 962 pages are permanently allocated to VMS.

 $ shutdown


        SHUTDOWN -- Perform an Orderly System Shutdown


%SHUTDOWN-I-OPERATOR, This terminal is now an operator's console.
%SHUTDOWN-I-DISLOGINS, Interactive logins will now be disabled.
%SET-I-INTSET, login interactive limit = 0, current interactive value = 1
%SHUTDOWN-I-STOPQUEMAN, The queue manager will now be stopped.

SHUTDOWN message on SALONE from user SYSTEM at _SALONE$OPA0:   08:45:19
SALONE will shut down in 0 minutes; back up LATER.  Please log off node SALONE.
SHUTDOWN

1 terminal has been notified on SALONE.

%SHUTDOWN-I-STOPUSER, All user processes will now be stopped.
%SHUTDOWN-I-REMOVE, All installed images will now be removed.
%SHUTDOWN-I-DISMOUNT, All volumes will now be dismounted.

  
       SYSTEM SHUTDOWN COMPLETE - USE CONSOLE TO HALT SYSTEM
  
Infinite loop, PC: 80008D7E (BRB 80008D7E)
sim> exit
Goodbye

Optional System Software

Choose Optional System Software

There are four sets of optional system software. Each set contains some utilities, whereof you can choose:

  • UTIL Set (floppies BL-B014B-BE to BL-B017B-BE):
    • MAIL utility
    • SEARCH utility
    • DIFF utility
    • DUMP utility
    • RUNOFF utility
    • PHONE utility
    • MicroVMS HELP library
    • Remote terminal support via SET HOST/DTE
    • Drivers for network communication devices
    • LAT-11 terminal server support (via Ethernet)
    • Stand-alone backup on system disk support


  • USER Set (floppy BL-B018B-BE):
    • File Access Control List utilities
    • Disk Quota utility
    • Print and Batch Queue utilities
    • Input Queue Symbiont (Card Reader)
    • Accounting Log Report Generator utility


  • PROG Set (floppies BL-B20B-BE to BL-B025B-BE):
    • Debugger utility
    • Image Dump utility
    • RMS Analyze and FDL Editor utilities
    • Message utility
    • Object and Shareable Image libraries
    • Macro libraries
    • Macro assembler
    • SDL intermediary form of STARLET.MLB
    • FORTRAN require files


  • SYSP Set (floppies BL-B026B-BE to BL-B031B-BE):
    • Error Log Report Generator utility
    • Files-11 ODS1 ACP and EXCHANGE utility
    • Magtape ACP
    • Monitor utility
    • Analyze Object File utility
    • Delta debugger
    • System Dump Analyzer utility
    • System Symbol Table file
    • Misc Symbol Table files
    • System map
    • Connect-to-Interrupt Driver


I recommend to install:

  • UTIL Set:
    • MAIL utility
    • SEARCH utility
    • PHONE utility
    • MicroVMS HELP library
    • Remote terminal support via SET HOST/DTE
    • Drivers for network communication devices
    • Stand-alone backup on system disk support


  • USER Set:
    • Disk Quota utility
    • Print and Batch Queue utilities


  • SYSP Set:
    • Monitor utility

Choose whatever you want, but consider: disk space is limited!

Install Optional System Software

DECnet Networking Software

Install DECnet

The MicroVMS V4.0 DECnet installation needs two steps:

  • Install Drivers for network communication devices from the UTIL optional system software set
  • Install DECnet software
    (non-standard procedure, as the DECnet for MicroVMS V4.0 kit is not available as of now; DECnet license key is included)
sim> b rq0
.2..1..0.
  

  MicroVMS Version V4.0 15-SEP-1984 22:29
  


PLEASE ENTER DATE AND TIME (DD-MMM-YYYY  HH:MM)  12-JUL-2023 9:00

%SYSGEN-W-OPENIN, error opening SYS$SYSROOT:[SYSEXE]XQDRIVER.EXE; as input
%SYSGEN-E-FNF, file not found

The MicroVMS system is now executing the site-specific startup commands.

%SET-I-INTSET, login interactive limit = 64, current interactive value = 0
  SYSTEM       job terminated at 12-JUL-2023 09:00:29.70


        Welcome to MicroVMS V4.0


Username: SYSTEM

        Welcome to MicroVMS V4.0

    Last interactive login on Wednesday, 12-JUL-2023 08:44

%SET-W-NOTSET, error modifying OPA0:
-SET-I-UNKTERM, unknown terminal type

 $ [STRG + e]
Simulation stopped, PC: 80008B1F (BRB 80008B1F)
sim> att rq1 BL-B014B-BE.dsk
sim> c


 $ @sys$update:vmsinstal


        VAX/VMS Software Product Installation Procedure V4.0


It is 12-JUL-2023 at 09:00.
Enter a question mark (?) at any time for help.

* Are you satisfied with the backup of your system disk [YES]? yes
* Where will the distribution volumes be mounted: dua1:

Enter the products to be processed from the first distribution volume set.
* Products: *

Please mount the first volume of the set on DUA1:.
* Are you ready? yes

%MOUNT-I-MOUNTED, UTIL01       mounted on _DUA1:

The following products will be processed:

  UTIL V4.0


        Beginning installation of UTIL V4.0 at 09:01

%VMSINSTAL-I-RESTORE, Restoring product saveset A...
* Do you want to install the entire kit: no
* Do you want to install the MAIL utility: no
* Do you want to install the SEARCH utility: no
* Do you want to install the DIFF utility: no
* Do you want to install the DUMP utility: no
* Do you want to install the RUNOFF utility: no
* Do you want to install the PHONE utility: no
* Do you want to install the MicroVMS HELP library: no
* Do you want to install the Remote terminal support via SET HOST/DTE: no
* Do you want to install the Drivers for network communication devices: yes
* Do you want to install the LAT-11 terminal server support (via Ethernet): no
* Do you want to install the Stand-alone backup on system disk support: no

%VMSINSTAL-I-RESTORE, Restoring product saveset J...
Please mount the next distribution volume on DUA1:.
(If no more volumes, answer NO.)
* Are you ready? [STRG + e]
Simulation stopped, PC: 80008B1F (BRB 80008B1F)
sim> att rq1 BL-B015B-BE.dsk
sim> c
yes

%MOUNT-I-MOUNTED, UTIL02       mounted on _DUA1:
Please mount the next distribution volume on DUA1:.
(If no more volumes, answer NO.)
* Are you ready? [STRG + e]
Simulation stopped, PC: 80008B1F (BRB 80008B1F)
sim> att rq1 BL-B016B-BE.dsk
sim> c
yes

%MOUNT-I-MOUNTED, UTIL03       mounted on _DUA1:
%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...

        Installation of UTIL V4.0 completed at 09:01


Enter the products to be processed from the next distribution volume set.
* Products: [STRG + y]
*INTERRUPT*

%VMSINSTAL-F-CTRLY, Installation cancelled via CTRL/Y.
%VMSINSTAL-F-UNEXPECTED, Installation terminated due to unexpected event.

        VMSINSTAL procedure done at 09:01



 $ dir sys$system:x*.*

Directory SYS$SYSROOT:[SYSEXE]

XDDRIVER.EXE;1      XQDRIVER.EXE;1      

Total of 2 files.

 $ [STRG + e]
Simulation stopped, PC: 80008B1F (BRB 80008B1F)
sim> att rq1 DECNET040-1of2.rx5
sim> c


 $ mou/for dua1:

%MOUNT-I-MOUNTED, NET040       mounted on _DUA1:

 $ backup/log/verify dua1:<000000>decnet040.bck/sav sys$sysdevice:<*>

%BACKUP-S-CREATED, created SYS$SYSDEVICE:[SYS0.SYSEXE]NCP.EXE;1
%BACKUP-S-CREATED, created SYS$SYSDEVICE:[SYS0.SYSEXE]NETACP.EXE;2
%BACKUP-S-CREATED, created SYS$SYSDEVICE:[SYS0.SYSEXE]NETDRIVER.EXE;1
%BACKUP-S-CREATED, created SYS$SYSDEVICE:[SYS0.SYSEXE]NETSERVER.EXE;1
%BACKUP-S-CREATED, created SYS$SYSDEVICE:[SYS0.SYSEXE]NICONFIG.EXE;1
%BACKUP-S-CREATED, created SYS$SYSDEVICE:[SYS0.SYSEXE]EVL.EXE;1
%BACKUP-S-CREATED, created SYS$SYSDEVICE:[SYS0.SYSEXE]NDDRIVER.EXE;1
%BACKUP-S-CREATED, created SYS$SYSDEVICE:[SYS0.SYSEXE]RTPAD.EXE;1
%BACKUP-S-CREATED, created SYS$SYSDEVICE:[SYS0.SYSEXE]REMACP.EXE;1
%BACKUP-S-CREATED, created SYS$SYSDEVICE:[SYS0.SYSEXE]RTTDRIVER.EXE;1
%BACKUP-S-CREATED, created SYS$SYSDEVICE:[SYS0.SYSEXE]CTDRIVER.EXE;1
%BACKUP-S-CREATED, created SYS$SYSDEVICE:[SYS0.SYSEXE]FAL.EXE;1
%BACKUP-S-CREATED, created SYS$SYSDEVICE:[SYS0.SYSEXE]FAL.COM;1
%BACKUP-S-CREATED, created SYS$SYSDEVICE:[SYS0.SYSEXE]PHONE.EXE;1
%BACKUP-S-CREATED, created SYS$SYSDEVICE:[SYS0.SYSEXE]PHONE.COM;1
%BACKUP-I-STARTVERIFY, starting verification pass
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSEXE]NCP.EXE;1
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSEXE]NETACP.EXE;2
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSEXE]NETDRIVER.EXE;1
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSEXE]NETSERVER.EXE;1
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSEXE]NICONFIG.EXE;1
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSEXE]EVL.EXE;1
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSEXE]NDDRIVER.EXE;1
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSEXE]RTPAD.EXE;1
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSEXE]REMACP.EXE;1
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSEXE]RTTDRIVER.EXE;1
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSEXE]CTDRIVER.EXE;1
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSEXE]FAL.EXE;1
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSEXE]FAL.COM;1
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSEXE]PHONE.EXE;1
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSEXE]PHONE.COM;1
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSEXE]MAIL.EXE;1
%BACKUP-I-RESUME, resuming operation on volume 2
%BACKUP-I-READYREAD, mount volume 2 on _SALONE$DUA1: for reading
Enter "YES" when ready: [STRG + e]
Simulation stopped, PC: 80008B1F (BRB 80008B1F)
sim> att rq1 DECNET040-2of2.rx5
sim> c
yes

%BACKUP-S-CREATED, created SYS$SYSDEVICE:[SYS0.SYSEXE]MAIL.EXE;1
%BACKUP-S-CREATED, created SYS$SYSDEVICE:[SYS0.SYSEXE]MAIL.COM;1
%BACKUP-S-CREATED, created SYS$SYSDEVICE:[SYS0.SYSEXE]MIRROR.EXE;1
%BACKUP-S-CREATED, created SYS$SYSDEVICE:[SYS0.SYSEXE]MIRROR.COM;1
%BACKUP-E-OPENOUT, error opening SYS$SYSDEVICE:[SYS0.SYSEXE]EVL.EXE;1 as output
-RMS-E-FEX, file already exists, not superseded
%BACKUP-S-CREATED, created SYS$SYSDEVICE:[SYS0.SYSEXE]EVL.COM;1
%BACKUP-S-CREATED, created SYS$SYSDEVICE:[SYS0.SYSEXE]DTR.COM;1
%BACKUP-S-CREATED, created SYS$SYSDEVICE:[SYS0.SYSEXE]NML.EXE;1
%BACKUP-S-CREATED, created SYS$SYSDEVICE:[SYS0.SYSEXE]NML.COM;1
%BACKUP-S-CREATED, created SYS$SYSDEVICE:[SYS0.SYSMGR]LOADNET.COM;1
%BACKUP-S-CREATED, created SYS$SYSDEVICE:[SYS0.SYSMGR]NETCONFIG.COM;1
%BACKUP-S-CREATED, created SYS$SYSDEVICE:[SYS0.SYSMGR]STARTNET.COM;1
%BACKUP-S-CREATED, created SYS$SYSDEVICE:[SYS0.SYSMGR]RTTLOAD.COM;1
%BACKUP-S-CREATED, created SYS$SYSDEVICE:[SYS0.SYSLIB]NMLSHR.EXE;1
%BACKUP-S-CREATED, created SYS$SYSDEVICE:[SYS0.SYSHLP]NCPHELP.HLB;1
%BACKUP-I-STARTVERIFY, starting verification pass
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSEXE]MAIL.EXE;1
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSEXE]MAIL.COM;1
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSEXE]MIRROR.EXE;1
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSEXE]MIRROR.COM;1
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSEXE]EVL.EXE;1
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSEXE]EVL.COM;1
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSEXE]DTR.COM;1
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSEXE]NML.EXE;1
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSEXE]NML.COM;1
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSMGR]LOADNET.COM;1
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSMGR]NETCONFIG.COM;1
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSMGR]STARTNET.COM;1
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSMGR]RTTLOAD.COM;1
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSLIB]NMLSHR.EXE;1
%BACKUP-S-COMPARED, compared SYS$SYSDEVICE:[SYS0.SYSHLP]NCPHELP.HLB;1

 $

Configure DECnet

 $ @netconfig

        DECnet-VAX network configuration procedure

This procedure will help you define the parameters needed to get DECnet 
running on this machine.  You will be shown the changes before they are 
executed, in case you wish to perform them manually.


What do you want your DECnet node name to be?       [SALONE]: salone

What do you want your DECnet address to be?                 : 1.42

Do you want to operate as a router?        [NO (nonrouting)]: no

Do you want a default DECnet account?                  [YES]: yes

        Here are the commands necessary to setup your system.

--------------------------------------------------------------------------
$ RUN SYS$SYSTEM:NCP
    PURGE EXECUTOR ALL
    PURGE KNOWN LINES ALL
    PURGE KNOWN CIRCUITS ALL
    PURGE KNOWN LOGGING ALL
    PURGE KNOWN OBJECTS ALL
    PURGE MODULE CONFIGURATOR KNOWN CIRCUITS ALL
$ DEFINE/USER SYS$OUTPUT NL:
$ DEFINE/USER SYS$ERROR NL:
$ RUN SYS$SYSTEM:NCP    ! Remove existing entry, if any
    PURGE NODE 1.42 ALL
    PURGE NODE SALONE ALL
$ RUN SYS$SYSTEM:NCP
    DEFINE EXECUTOR ADDRESS 1.42 STATE ON
    DEFINE EXECUTOR NAME SALONE
    DEFINE EXECUTOR MAXIMUM ADDRESS 255
    DEFINE EXECUTOR TYPE NONROUTING IV
    DEFINE EXECUTOR NONPRIVILEGED USER DECNET
    DEFINE EXECUTOR NONPRIVILEGED PASSWORD DECNET
$ DEFINE/USER SYSUAF SYS$SYSTEM:SYSUAF.DAT
$ RUN SYS$SYSTEM:AUTHORIZE
    ADD DECNET /OWNER="DECNET DEFAULT" -
        /PASSWORD=DECNET -
Press RETURN to continue


        /UIC=[376,376] /ACCOUNT=DECNET -
        /DEVICE=SYS$SYSDEVICE: /DIRECTORY=[DECNET] -
        /PRIVILEGE=(TMPMBX,NETMBX) -
        /FLAGS=(CAPTIVE) /LGICMD=NL: -
        /NOBATCH /NOINTERACTIVE 
$ CREATE/DIRECTORY SYS$SYSDEVICE:[DECNET] /OWNER=[376,376]
$ RUN SYS$SYSTEM:NCP
    DEFINE LINE    QNA-0 STATE ON
    DEFINE CIRCUIT QNA-0 STATE ON COST 4
    DEFINE LOGGING MONITOR STATE ON
    DEFINE LOGGING MONITOR EVENTS 0.0-9
    DEFINE LOGGING MONITOR EVENTS 2.0-1
    DEFINE LOGGING MONITOR EVENTS 4.2-13,15-16,18-19
    DEFINE LOGGING MONITOR EVENTS 5.0-18
    DEFINE LOGGING MONITOR EVENTS 128.0-4
--------------------------------------------------------------------------


Do you want to go ahead and do it? [YES]: yes

%UAF-I-ADDMSG, user record successfully added
%UAF-I-RDBADDMSGU, identifier DECNET value: [000376,000376] added to RIGHTSLIST.DAT
%UAF-I-DONEMSG, system authorization file modified
%UAF-I-RDBDONEMSG, rights database modified
%NCP-I-NMLRSP, listener response - Success 
Logging sink type = monitor
%NML-I-RECADDED, Database entry added

The changes have been made.

If you have not already installed the DECnet-VAX license, then do so now.

After the license has been installed, you should invoke the procedure
SYS$MANAGER:STARTNET.COM to startup DECnet-VAX with these changes.


(If the license is already installed) Do you want DECnet started? [YES]: yes

%RUN-S-PROC_ID, identification of created process is 00000016
%RUN-S-PROC_ID, identification of created process is 00000018

 $ set host 0

        Welcome to MicroVMS V4.0


Username: SYSTEM

        Welcome to MicroVMS V4.0

    Last interactive login on Wednesday, 12-JUL-2023 09:00
%SET-W-NOTSET, error modifying RTA1:
-SET-I-UNKTERM, unknown terminal type

 $ sh us

          VAX/VMS Interactive Users
           12-JUL-2023 09:05:13.23
    Total number of interactive users = 2

 Username     Process Name      PID     Terminal
 SYSTEM       SYSTEM          00000015  OPA0:          
 SYSTEM       _RTA1:          00000019  RTA1:          

 $ sh sys

VAX/VMS V4.0  on node SALONE 12-JUL-2023 09:05:15.84   Uptime    0 00:05:25
  Pid    Process Name    State  Pri      I/O       CPU       Page flts Ph.Mem
00000010 NULL            COM      0        0   0 00:05:16.35         0      0   
00000011 SWAPPER         HIB     16        0   0 00:00:00.01         0      0   
00000014 JOB_CONTROL     HIB      8       18   0 00:00:00.01        83    185   
00000015 SYSTEM          HIB      5     4045   0 00:00:06.99     16981    302   
00000016 NETACP          HIB     10       15   0 00:00:00.02       235    137   
00000017 EVL             HIB      4       43   0 00:00:00.03       326     29  N
00000018 REMACP          HIB      9       1117-NOV-1858 00:0        69     37   
00000019 _RTA1:          CUR      4       94   0 00:00:00.07       669    152   

 $ set host 0

        Welcome to MicroVMS V4.0


Username: SYSTEM

        Welcome to MicroVMS V4.0

    Last interactive login on Wednesday, 12-JUL-2023 09:05

%SET-W-NOTSET, error modifying RTA2:
-SET-I-UNKTERM, unknown terminal type

 $ mc ncp sho kno link

 
 
Known Link Volatile Summary as of 12-JUL-2023 09:05:38
 
   Link       Node           PID     Process     Remote link  Remote user
 
  1       1.42 (SALONE)    00000015  SYSTEM                2  CTERM
  2       1.42 (SALONE)    00000018  REMACP                1  SYSTEM
  3       1.42 (SALONE)    00000019  _RTA1:                4  CTERM
  4       1.42 (SALONE)    00000018  REMACP                3  SYSTEM

 $ sh us

          VAX/VMS Interactive Users
           12-JUL-2023 09:05:50.75
    Total number of interactive users = 3

 Username     Process Name      PID     Terminal
 SYSTEM       SYSTEM          00000015  OPA0:          
 SYSTEM       _RTA1:          00000019  RTA1:          
 SYSTEM       _RTA2:          0000001A  RTA2:          

 $ lo

  SYSTEM       logged out at 12-JUL-2023 09:05:53.13
%REM-S-END, control returned to node _SALONE::

 $ lo
 $ sh net

VAX/VMS Network status for local node  1.42 SALONE on 12-JUL-2023 09:06:01.79


 $ sh us

          VAX/VMS Interactive Users
           12-JUL-2023 09:06:14.98
    Total number of interactive users = 2

 Username     Process Name      PID     Terminal
 SYSTEM       SYSTEM          00000015  OPA0:          
 SYSTEM       _RTA1:          00000019  RTA1:          

 $ lo

  SYSTEM       logged out at 12-JUL-2023 09:06:16.56
%REM-S-END, control returned to node _SALONE::

 $ lo

  SYSTEM       logged out at 12-JUL-2023 09:06:54.75


        Welcome to MicroVMS V4.0


Username: SYSTEM

        Welcome to MicroVMS V4.0

    Last interactive login on Wednesday, 12-JUL-2023 09:05

%SET-W-NOTSET, error modifying OPA0:
-SET-I-UNKTERM, unknown terminal type

 $ shutdown


        SHUTDOWN -- Perform an Orderly System Shutdown


%SHUTDOWN-I-OPERATOR, This terminal is now an operator's console.
%SHUTDOWN-I-DISLOGINS, Interactive logins will now be disabled.
%SET-I-INTSET, login interactive limit = 0, current interactive value = 1
%SHUTDOWN-I-SHUTNET, The DECnet network will now be shut down.
%SHUTDOWN-I-STOPQUEMAN, The queue manager will now be stopped.

SHUTDOWN message on SALONE from user SYSTEM at _SALONE$OPA0:   09:07:01
SALONE will shut down in 0 minutes; back up LATER.  Please log off node SALONE.
SHUTDOWN

1 terminal has been notified on SALONE.

%SHUTDOWN-I-STOPUSER, All user processes will now be stopped.
%SHUTDOWN-I-REMOVE, All installed images will now be removed.
%SHUTDOWN-I-DISMOUNT, All volumes will now be dismounted.

  
        SYSTEM SHUTDOWN COMPLETE - USE CONSOLE TO HALT SYSTEM
  
Infinite loop, PC: 80008D7E (BRB 80008D7E)
sim> exit
Goodbye

Recommended Reading

  • xxx
Retrieved from "https://gunkies.org/w/index.php?title=Installing_and_Configuring_MicroVMS_V4.0_on_a_MicroVAX_I&oldid=30570"