Difference between revisions of "Border Gateway Protocol"

Revision as of 02:45, 17 November 2018

The Border Gateway Protocol (usually known by its acronym BGP) is a routing protocol in the TCP/IP protocol suite; specifically, it is an EGP, used for providing the information needed for doing path selection between Autonomous Systems.

It is a Destination Vector protocol; the data it carries are routing table entries. It detects and prevents routing loops by tagging each table entry with the complete path.

This article is not as complete coverage of the topic as it could be. You can help by expanding it.

Revision as of 02:41, 17 November 2018 (view source) Jnc (talk \| contribs) (An OK start)		Revision as of 02:45, 17 November 2018 (view source) Jnc (talk \| contribs) m (typo) Newer edit →
Line 1:		Line 1:
−	The '''Border Gateway Protocol''' (usually known by its acronym '''BGP''') is a [[routing protocol]] in the [[TCP/IP]] [[protocol suite]]; specifically, it is an [[~~External~~ Gateway Protocol\|EGP]], used for providing the information needed for doing [[path selection]] between [[Autonomous System]]s.	+	The '''Border Gateway Protocol''' (usually known by its acronym '''BGP''') is a [[routing protocol]] in the [[TCP/IP]] [[protocol suite]]; specifically, it is an [[Exterior Gateway Protocol\|EGP]], used for providing the information needed for doing [[path selection]] between [[Autonomous System]]s.

	It is a [[routing architecture\|Destination Vector]] protocol; the data it carries are [[routing table]] entries. It detects and prevents [[routing loop]]s by tagging each table entry with the complete path.		It is a [[routing architecture\|Destination Vector]] protocol; the data it carries are [[routing table]] entries. It detects and prevents [[routing loop]]s by tagging each table entry with the complete path.