Difference between revisions of "DESVA VAXstation 2000 / MicroVAX 2000 ThinWire Ethernet Option"
(Category changed to "DEC Network Interfaces") |
m (Vaxorcist moved page DESVA VAXstation 2000 / MicroVAX 2000 ThinWire Ethernet Option Module to DESVA VAXstation 2000 / MicroVAX 2000 ThinWire Ethernet Option: The page is about the whole option, not just the module) |
(No difference)
|
Revision as of 13:47, 11 August 2022
The DESVA Ethernet controller option module enables the connection of a VAXstation 2000 or MicroVAX 2000 system to an Ethernet network via a ThinWire connection using RG-58 coaxial cable. The option is packaged on a 4-inch by 7-inch board that is located in the system unit and plugs into the two DESVA option connectors (J5 and J14) on the system module. The DESVA module is powered by the system box power supply. The DESVA contains a Local Area Network Controller for Ethernet (LANCE) chip, a serial interface adapter (SIA) chip, and a ROM that contains device-driver programming, and supports logic circuitry. The Ethernet transceiver chip, Ethernet address ROM, and the BNC connector for the RG-58 cable to the Ethernet are mounted on the system module. The network components on the VAXstation 2000 / MicroVAX 2000 system module are inactive until the DESVA option module is installed. [1]