Gate array

From Computer History Wiki
Revision as of 20:20, 14 December 2018 by Jnc (talk | contribs) (+cat)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

A gate array is a way of producing a customized digital integrated circuit with a minimal amount of design work, and in a shorter time frame (from start, to production of actual physical units).

The basic chip design, used across a wide number of custom gate arrays, has a lot of un-connected transistors. (Chips fabricated to this level are often mass-produced and stockpiled for later use.)

Only one of the last steps, the so-called 'metal layer', which is used to connect circuitry components together, is custom. The metal layer for a paticular gate array connects together the transistors to form the desired gates, which are further connected into higher level entities such as flip-flops.

They have now been largely replaced with field-programmable gate arrays, which involve no custom fabrication (so a single stockpile can be sent for multiple uses), can be easily re-programmed during development, and can be re-programmed in the field if mistakes are found, or enhancements developed.