Difference between revisions of "KY11-LA Operator's Console"
From Computer History Wiki
(Add image) |
m (common fmt) |
||
| (7 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
[[Image:KY11-LA.jpg|thumb|right|300px|A KY11-LA Operator's Console on a PDP-11/04]] | [[Image:KY11-LA.jpg|thumb|right|300px|A KY11-LA Operator's Console on a PDP-11/04]] | ||
| − | The '''KY11-LA Operator's Console''' was the standard basic front panel for the [[PDP-11/04]] and the [[PDP-11/34]] (the units for the two machines differed only in the number painted on the plastic insert). It provided only the functionality to halt or reboot the machine, not the then-usual full functionality of a conventional 'lights and switches' front panel. | + | The '''KY11-LA Operator's Console''' was the standard basic [[front panel]] for the [[PDP-11/04]] and the [[PDP-11/34]] (the units for the two machines differed only in the number painted on the plastic insert). It provided only the functionality to [[halt]] or [[bootstrap|reboot]] the machine, not the then-usual full functionality of a conventional 'lights and switches' front panel. |
The controls were: | The controls were: | ||
| − | * A three-position power switch ('DC On', 'DC Off', and 'Standby' - in the latter, power was supplied to the [[MOS]] [[main memory]] only) | + | * A three-position power switch ('DC On', 'DC Off', and 'Standby' - in the latter, power was supplied to the [[Metal Oxide Semiconductor|MOS]] [[main memory]] only) |
| − | * A 'Halt'/'Continue' two-position toggle switch (in the first position, the CPU was stopped) | + | * A 'Halt'/'Continue' two-position toggle switch (in the first position, the [[Central Processing Unit|CPU]] was stopped) |
* A 'Boot'/'Initialize' spring-loaded toggle switch (normally in the 'Boot' position, in which is did not have any effect; setting it to 'Initialize' caused the machine to do a power-fail restart) | * A 'Boot'/'Initialize' spring-loaded toggle switch (normally in the 'Boot' position, in which is did not have any effect; setting it to 'Initialize' caused the machine to do a power-fail restart) | ||
| − | It was normally used with the [[M9301 ROM]] card, which could be configured to 'grab' the CPU | + | It was normally used with the [[M9301 ROM]] card, which could be configured to 'grab' the CPU on a power-fail re-start, and which contained (among other things) a console front panel emulator. |
| − | It consisted of a front panel which included a small circuit board; to perform the basic functions of the console, it communicated with the [[ | + | It consisted of a front panel which included a small [[printed circuit board]]; to perform the basic functions of the console, it communicated with the CPU through a 10-[[conductor]] [[flat cable]] connected to the main [[backplane]]. |
| − | + | In addition to several standard [[UNIBUS]] signals (SACK, INIT, DCLO and ACLO), it also used a pair of additional backplane [[signal]]s (Halt Request and Grant) to communicate with the CPU, to request that the main CPU halt, and for the CPU to acknowledge that it has honoured that request. | |
| + | |||
| + | ==See also== | ||
| + | |||
| + | * [[KY11-LB Programmer's Console]] | ||
| + | * [[KY11-L to CPU interface]] | ||
| + | |||
| + | ==External links== | ||
| + | |||
| + | * [http://bitsavers.org/pdf/dec/pdp11/1134/1134_UsersManual.pdf PDP-11/34 system user's manual] - the KY11-LA is covered in Chapter 2 | ||
| + | * [http://bitsavers.org/pdf/dec/pdp11/1104/MP00019_1104_EngrDrws_Feb78.pdf 11/04 Engineering Drawings] - the KY11-LA Field Maintenance Print Set (MP00017) is on pp. 143-148 of the PDF | ||
| + | * [https://www.millsupply.com/knob-fan-speed-grumman-olson-53777.php?p=324629 Knob with 1/4" D Shaft] - Replacement power knob; not absolutely identical to DEC original, but very functional | ||
| + | |||
| + | [[Category: PDP-11 UNIBUS Processors]] | ||
Latest revision as of 18:29, 3 April 2022
The KY11-LA Operator's Console was the standard basic front panel for the PDP-11/04 and the PDP-11/34 (the units for the two machines differed only in the number painted on the plastic insert). It provided only the functionality to halt or reboot the machine, not the then-usual full functionality of a conventional 'lights and switches' front panel.
The controls were:
- A three-position power switch ('DC On', 'DC Off', and 'Standby' - in the latter, power was supplied to the MOS main memory only)
- A 'Halt'/'Continue' two-position toggle switch (in the first position, the CPU was stopped)
- A 'Boot'/'Initialize' spring-loaded toggle switch (normally in the 'Boot' position, in which is did not have any effect; setting it to 'Initialize' caused the machine to do a power-fail restart)
It was normally used with the M9301 ROM card, which could be configured to 'grab' the CPU on a power-fail re-start, and which contained (among other things) a console front panel emulator.
It consisted of a front panel which included a small printed circuit board; to perform the basic functions of the console, it communicated with the CPU through a 10-conductor flat cable connected to the main backplane.
In addition to several standard UNIBUS signals (SACK, INIT, DCLO and ACLO), it also used a pair of additional backplane signals (Halt Request and Grant) to communicate with the CPU, to request that the main CPU halt, and for the CPU to acknowledge that it has honoured that request.
See also
External links
- PDP-11/34 system user's manual - the KY11-LA is covered in Chapter 2
- 11/04 Engineering Drawings - the KY11-LA Field Maintenance Print Set (MP00017) is on pp. 143-148 of the PDF
- Knob with 1/4" D Shaft - Replacement power knob; not absolutely identical to DEC original, but very functional
