Difference between revisions of "MA20 core memory"

From Computer History Wiki
Jump to: navigation, search
(Found a desc of this one)
 
m (See also: +1; copyedit)
Line 1: Line 1:
The '''MA20''' was a [[core memory|core]] [[main memory]] system for the later [[PDP-10]]s, principally the mid-period [[KL10]]. An MA20 contained two memory controllers (numbered 0 and 1, or 2 and 3), each with up to four 16KW storage modules, for a maximum of 128KW; [[parity]] is provided to protect the memory contents. The [[access time]] is 1.00 µseconds, and the [[cycle time]] is 1.92 µseconds (both for the first [[word]] in a 4-word block, using four-way [[interleaving]]).
+
The '''MA20''' was a [[core memory|core]] [[main memory]] system for the later [[PDP-10]]s, principally the mid-period [[KL10]]; it connected to the KL10's so-called internal memory bus, the S-Bus. An MA20 contained two memory controllers (numbered 0 and 1, or 2 and 3), each with up to four 16KW storage modules, for a maximum of 128KW; [[parity]] is provided to protect the memory contents. The [[access time]] is 1.00 µseconds, and the [[cycle time]] is 1.92 µseconds (both for the first [[word]] in a 4-word block, using four-way [[interleaving]]).
  
It connected to the KL10's so-called internal memory bus, the S-Bus; controllers 0 and 1 are connected to S-Bus 0, and controllers 2 and 3 to S-Bus 1. For interleaving, each controller is configured as to which addresses (out of the 4 in an S-Bus block) it will respond to; both 2-way and 4-way interleaving require controllers to be set to 'odd' or 'even'. In 4-way interleaving, in addition to two controllers being actuated at the same time, each controller can start two modules reading at the same time.
+
Controllers 0 and 1 are connected to S-Bus 0, and controllers 2 and 3 to S-Bus 1. For interleaving, each controller is configured as to which addresses (out of the 4 in an S-Bus block) it will respond to; both 2-way and 4-way interleaving require controllers to be set to 'odd' or 'even'. In 4-way interleaving, in addition to two controllers being actuated at the same time, each controller can start two modules reading at the same time.
 +
 
 +
==See also==
 +
 
 +
* [[MB20 core memory]
  
 
[[Category: PDP-10 memories]]
 
[[Category: PDP-10 memories]]

Revision as of 17:47, 11 April 2021

The MA20 was a core main memory system for the later PDP-10s, principally the mid-period KL10; it connected to the KL10's so-called internal memory bus, the S-Bus. An MA20 contained two memory controllers (numbered 0 and 1, or 2 and 3), each with up to four 16KW storage modules, for a maximum of 128KW; parity is provided to protect the memory contents. The access time is 1.00 µseconds, and the cycle time is 1.92 µseconds (both for the first word in a 4-word block, using four-way interleaving).

Controllers 0 and 1 are connected to S-Bus 0, and controllers 2 and 3 to S-Bus 1. For interleaving, each controller is configured as to which addresses (out of the 4 in an S-Bus block) it will respond to; both 2-way and 4-way interleaving require controllers to be set to 'odd' or 'even'. In 4-way interleaving, in addition to two controllers being actuated at the same time, each controller can start two modules reading at the same time.

See also

  • [[MB20 core memory]