Difference between revisions of "RH10 MASSBUS controller"

Revision as of 14:37, 25 October 2022

An RH10 MASSBUS controller is a secondary storage device controller for the PDP-10, primarily for the early models (KA10 and KI10) which had the PDP-10 I/O Bus as a standard bus. It is always paired with a DF10 Data Channel unit which performs DMA to main memory.

It works with MASSBUS disk drives and magnetic tape drives (such as the RP04, etc, series drives); up to 8 drives per RH10.

This article is not as complete coverage of the topic as it could be. You can help by expanding it.

@@ Line 1: / Line 1: @@
-An '''RH10 MASSBUS controller''' is a [[secondary storage]] [[device controller]] for the [[PDP-10]], primarily for the early models ([[KA10]] and [[KI10]]) which had the PDP-10 [[input/output|I/O]] [[bus]] as a standard bus.
+An '''RH10 MASSBUS controller''' is a [[secondary storage]] [[device controller]] for the [[PDP-10]], primarily for the early models ([[KA10]] and [[KI10]]) which had the [[PDP-10 I/O Bus]] as a standard bus. It is always paired with a [[DF10 Data Channel]] unit which performs [[Direct Memory Access|DMA]] to [[main memory]].
-It works with [[MASSBUS]] [[disk]] [[drive]]s and [[magnetic tape drive]]s (such as the [[RP04 disk drive|RP04]], etc, series drives); up to 8 drives per RH10. It is paired with a [[DF10 Data Channel]] unit which performs [[Direct Memory Access|DMA]] to [[main memory]].
+It works with [[MASSBUS]] [[disk]] [[drive]]s and [[magnetic tape drive]]s (such as the [[RP04 disk drive|RP04]], etc, series drives); up to 8 drives per RH10.
 {{semi-stub}}