Difference between revisions of "RP10 disk controller"
From Computer History Wiki
(clarify) |
(clarify, +see also) |
||
| Line 1: | Line 1: | ||
The '''RP10 disk controller''' is a [[disk]] [[device controller]] for the [[PDP-10]], primarily for the early models ([[KA10]] and [[KI10]]) which had the PDP-10 [[input/output|I/O]] [[bus]] as a standard bus. | The '''RP10 disk controller''' is a [[disk]] [[device controller]] for the [[PDP-10]], primarily for the early models ([[KA10]] and [[KI10]]) which had the PDP-10 [[input/output|I/O]] [[bus]] as a standard bus. | ||
| − | It works with the [[RP01 disk drive|RP01]], [[RP02 disk drive|RP02]] and [[RP03 disk drive]]s; up to 8 drives per controller. It | + | It works with the [[RP01 disk drive|RP01]], [[RP02 disk drive|RP02]] and [[RP03 disk drive]]s; up to 8 drives per controller. It is paired with a [[DF10 Data Channel]] unit which performs [[Direct Memory Access|DMA]] to [[main memory]]. |
The RP10 has the ability to perform [[seek]]s on multiple drives simultaneously. | The RP10 has the ability to perform [[seek]]s on multiple drives simultaneously. | ||
| + | |||
| + | ==See also== | ||
| + | |||
| + | * [[RH10 MASSBUS controller]] | ||
{{semi-stub}} | {{semi-stub}} | ||
[[Category: DEC Storage Controllers]] | [[Category: DEC Storage Controllers]] | ||
Revision as of 14:58, 18 November 2018
The RP10 disk controller is a disk device controller for the PDP-10, primarily for the early models (KA10 and KI10) which had the PDP-10 I/O bus as a standard bus.
It works with the RP01, RP02 and RP03 disk drives; up to 8 drives per controller. It is paired with a DF10 Data Channel unit which performs DMA to main memory.
The RP10 has the ability to perform seeks on multiple drives simultaneously.
