Difference between revisions of "TU80 Tape Transport"
From Computer History Wiki
(Fix infobox (density -> tape density)) |
(The TU80 used a Motorola 6802 CPU) |
||
| Line 13: | Line 13: | ||
It was manufactured for DEC by Computer Peripherals, Inc. (CPI) of Morristown, Pennsylvania. CPI was a subsidiary of [[Control Data Corporation]] (CDC), which besides being a computer manufacturer themselves also provided peripherals and storage components for other vendors. | It was manufactured for DEC by Computer Peripherals, Inc. (CPI) of Morristown, Pennsylvania. CPI was a subsidiary of [[Control Data Corporation]] (CDC), which besides being a computer manufacturer themselves also provided peripherals and storage components for other vendors. | ||
| + | |||
| + | The TU80 appears to have been controlled by a [[Motorola]] [[MC6802]] processor, a variant of the [[MC6800]] with 128 bytes of internal RAM and an internal clock oscillator. There were also five [[6821 PIA|6821]] [[PIA| Parallel Interface Adapter]] chips for interfacing to the various parts of the bus and operator panel etc. | ||
| + | The firmware was stored in an 8KB [[ROM]] chip. | ||
{{stub}} | {{stub}} | ||
Revision as of 15:40, 28 February 2013
| TU80 | |
| Manufacturer: | Digital Equipment Corporation |
|---|---|
| Media: | standard half-inch tape, 2400 ft. maximum |
| Tape density: | 1600 bpi |
| Tape speed: | 100 inch/sec (streaming) or 25 inch/sec (start/stop) |
The TU80 was a manually-loaded nine-track tape drive sold by DEC for the PDP-11 and VAX computers.
It was manufactured for DEC by Computer Peripherals, Inc. (CPI) of Morristown, Pennsylvania. CPI was a subsidiary of Control Data Corporation (CDC), which besides being a computer manufacturer themselves also provided peripherals and storage components for other vendors.
The TU80 appears to have been controlled by a Motorola MC6802 processor, a variant of the MC6800 with 128 bytes of internal RAM and an internal clock oscillator. There were also five 6821 Parallel Interface Adapter chips for interfacing to the various parts of the bus and operator panel etc. The firmware was stored in an 8KB ROM chip.
