3Com 3C501
From Computer History Wiki
(Redirected from 3C501)
The 3C501 from 3Com was a very popular Ethernet interface card for early IBM PCs and IBM-compatible PCs.
ETHERLINK (3C501; ASSY.#1221)
NIC Type | Ethernet |
Transfer Rate | 10Mbps |
Data Bus | 8-bit ISA |
Topology | Linear Bus |
Wiring Type | RG-58A/U 50ohm coaxial |
AUI transceiver via DB-15 port | |
Boot ROM | Available |
CABLE TYPE SELECTION
Type | Setting |
---|---|
RG-58A/U 50ohm coaxial | Option 1 |
AUI transceiver via DB-15 port | Option 2 |
BOOT ROM CONFIGURATION
Setting | JP3 |
---|---|
Disabled | Pins 2 & 3 Closed |
Enabled | Pins 1 & 2 Closed |
I/O BASE ADDRESS SELECTION BOOT ROM CONFIGURATION
Address | JP4 | JP5 | JP6 | JP7 | JP8 | JP9 |
---|---|---|---|---|---|---|
300h | Pins 2 & 3 | Pins 2 & 3 | Pins 2 & 3 | Pins 2 & 3 | Pins 1 & 2 | Pins 1 & 2 |
310h | Pins 1 & 2 | Pins 2 & 3 | Pins 2 & 3 | Pins 2 & 3 | Pins 1 & 2 | Pins 1 & 2 |
Note: Pins designated should be in the closed position.
BOOT ROM ADDRESS SELECTION
Address | JP12 | JP13 | JP14 | JP15 | JP16 | JP17 | JP18 | JP19 |
---|---|---|---|---|---|---|---|---|
CC000h | Pins 2&3 | Pins 2&3 | Pins 1&2 | Pins 1&2 | Pins 2&3 | Pins 2&3 | Pins 1&2 | Pins 1&2 |
EC000h | Pins 2&3 | Pins 2&3 | Pins 1&2 | Pins 1&2 | Pins 2&3 | Pins 1&2 | Pins 1&2 | Pins 1&2 |
Note: Pins designated should be in the closed position.
INTERRUPT REQUEST SELECTION
IRQ | JP20 | JP21 | JP22 | JP23 | JP24 | JP25 |
---|---|---|---|---|---|---|
2 | Closed | Open | Open | Open | Open | Open |
3 | Open | Closed | Open | Open | Open | Open |
4 | Open | Open | Closed | Open | Open | Open |
5 | Open | Open | Open | Closed | Open | Open |
6 | Open | Open | Open | Open | Closed | Open |
7 | Open | Open | Open | Open | Open | Closed |
DMA CHANNEL SELECTION
Channel | JP26 | JP27 | JP28 | JP29 | JP30 | JP31 |
---|---|---|---|---|---|---|
DMA1 | Closed | Open | Open | Closed | Open | Open |
DMA2 | Open | Closed | Open | Open | Closed | Open |
DMA3 | Open | Open | Closed | Open | Open | Closed |