Difference between revisions of "RK05 disk drive"
m (typo) |
m (Jnc moved page RK05 to RK05 disk drive: canonical naming) |
(No difference)
| |
Revision as of 21:40, 2 October 2017
| RK05 | |
| Manufacturer: | Digital Equipment Corporation |
|---|---|
| Drive Controller(s): | RK8E (Omnibus) RK11-D (UNIBUS) RKV11-D (QBUS) |
| Capacity: | 2.45 Mbytes (most versions) |
| Transfer Rate: | 102 Kword/sec (RK8E) 90.1 Kword/sec (RK11) |
| Average Access Time: | 70 msec |
| Revolutions per Minute: | 1500 |
| 1/2 Revolution Time: | 20 msec |
| One Track Seek Time: | 10 msec |
| Average Seek Time: | 50 msec |
| Maximum Seek Time: | 85 msec |
| Total Surfaces: | 2 |
| Words per Sector: | 256 |
| Tracks per Inch: | 100 |
| Density: | 2200 bpi |
| Recording Method: | Double Frequency NRZ |
| Physical Size: | 19" W x 10.5" H x 26.5" L |
| Weight: | 110 pounds |
| Power Consumption: | 230 VA (running); 1150 VA (starting, 2 sec) |
The RK05 was moving-head magnetic storage disk drive, most versions of which used removable packs. They were designed and manufactured by DEC, and based on, but not completely compatible with, the earlier RK02 and RK03 drives (which were sold by DEC, but not manufactured by them), which in turn were inspired by the IBM 2315 drive and pack.
The pack contained a platter 14 inches in diameter, coated with iron oxide. Since the disk was hard sectored (using narrow slots cut through a projecting ring in the hub), packs used in the PDP-8 were physically incompatible with those used in the PDP-11, although the drives themselves were completely identical for both.
The controller interface on the RK05 was mostly compatible with the earlier RK02/RK03, although it used a different 'drive select' mechanism, which allowed an RK11-D controller to support up to 8 RK05 drives on a single drive bus, as opposed to only 4 per bus with the earlier RK02/03 and RK11-C system. The packs were compatible.
RK05 models
- RK05E - a version which contained many reliability enhancements
- RK05J - the final version
- RK05F - a version using a permanently installed platter, which allowed it to operate at twice the track density of the standard RK05, doubling the capacity of the drive; a single RK05F emulated two normal RK05 drives
