Difference between revisions of "RP04 disk drive"
From Computer History Wiki
m (Mod infobox to use simple param names) |
(Add manufac info) |
||
| Line 1: | Line 1: | ||
{{Infobox Disk drive | {{Infobox Disk drive | ||
| name = RP04 | | name = RP04 | ||
| − | + | | manufacturer = Sperry Univac ISS (basic drive), Digital Equipment Corporation (electronics) | |
| capacity = 88 Mbytes | | capacity = 88 Mbytes | ||
| controller = [[RH11 MASSBUS controller|RH11]] ([[UNIBUS]]) | | controller = [[RH11 MASSBUS controller|RH11]] ([[UNIBUS]]) | ||
| − | + | | average access time = 36.3 msec | |
| transfer rate = 2.5 usec/word | | transfer rate = 2.5 usec/word | ||
| rpm = 3600 | | rpm = 3600 | ||
| Line 17: | Line 17: | ||
<!-- | tracks per inch = 100 --> | <!-- | tracks per inch = 100 --> | ||
| density = 4040 bpi (maximum) | | density = 4040 bpi (maximum) | ||
| − | | recording method = [[Modified Frequence Modulation]] | + | | recording method = [[Modified Frequence Modulation]] (MFM) |
| physical size = 31" W x 40" H x 32" L | | physical size = 31" W x 40" H x 32" L | ||
| weight = 600 pounds | | weight = 600 pounds | ||
| Line 23: | Line 23: | ||
}} | }} | ||
| − | The '''RP04''' was the successor to the [[ | + | The '''RP04''' was the successor to the [[RP03 disk drive|RP03]] multi-[[platter]] large [[disk]] drive. It used a [[pack]] compatible with the [[IBM 3336]] pack, used on the [[IBM 3330]] drive. |
| + | |||
| + | The actual drive was produced by the Information Storage Systems (ISS) division of Sperry Univac, and [[OEM]]'d by [[DEC]]. | ||
It was the first large drive to use the [[MASSBUS]] bus; thus, it did not have a specific [[device controller]], but used the appropriate MASSBUS controller. A maximum of 8 drives were supported per controller. | It was the first large drive to use the [[MASSBUS]] bus; thus, it did not have a specific [[device controller]], but used the appropriate MASSBUS controller. A maximum of 8 drives were supported per controller. | ||
Revision as of 14:17, 3 October 2017
| RP04 | |
| Manufacturer: | Sperry Univac ISS (basic drive), Digital Equipment Corporation (electronics) |
|---|---|
| Drive Controller(s): | RH11 (UNIBUS) |
| Capacity: | 88 Mbytes |
| Transfer Rate: | 2.5 usec/word |
| Average Access Time: | 36.3 msec |
| Revolutions per Minute: | 3600 |
| 1/2 Revolution Time: | 8.3 msec |
| One Track Seek Time: | 7 msec |
| Average Seek Time: | 28 msec |
| Maximum Seek Time: | 50 msec |
| Total Surfaces: | 19 |
| Tracks per Surface: | 411 |
| Sectors per Track: | 22 |
| Words per Sector: | 256 |
| Density: | 4040 bpi (maximum) |
| Recording Method: | Modified Frequence Modulation (MFM) |
| Physical Size: | 31" W x 40" H x 32" L |
| Weight: | 600 pounds |
| Power Consumption: | 660 VA per phase (running); 3300 VA per phase (starting, 10 seconds max) |
The RP04 was the successor to the RP03 multi-platter large disk drive. It used a pack compatible with the IBM 3336 pack, used on the IBM 3330 drive.
The actual drive was produced by the Information Storage Systems (ISS) division of Sperry Univac, and OEM'd by DEC.
It was the first large drive to use the MASSBUS bus; thus, it did not have a specific device controller, but used the appropriate MASSBUS controller. A maximum of 8 drives were supported per controller.
