Difference between revisions of "H765 Power System"
m (+See also) |
m (move link) |
||
| Line 5: | Line 5: | ||
It also supplies 20-30V AC to several [[DEC standard modular regulator]]s (up to four, in spaces numbered '1' through '4') mounted in the H765, which provide other voltages such as +5V to the backplanes in the mounting box. | It also supplies 20-30V AC to several [[DEC standard modular regulator]]s (up to four, in spaces numbered '1' through '4') mounted in the H765, which provide other voltages such as +5V to the backplanes in the mounting box. | ||
| − | Generally the | + | Generally the [[power harness]] supports only a fixed arrangement as to which regulator can be in which spaces; e.g. the BA11-K harness mandates that #2 and #3 hold [[H744 +5V Regulator]]s, #1 holds an [[H745 -15V Regulator]], and #4 may hold an [[H754 +20V, -5V Regulator]]. |
When the BA11-K is used in custom configurations to hold systems (such as the [[MJ11 memory system]] and [[MK11 memory system]]), other regulator configurations may be used, along with a custom harness; e.g. the MJ11 calls for two H744's and two H754's. | When the BA11-K is used in custom configurations to hold systems (such as the [[MJ11 memory system]] and [[MK11 memory system]]), other regulator configurations may be used, along with a custom harness; e.g. the MJ11 calls for two H744's and two H754's. | ||
Revision as of 03:05, 19 September 2018
The H765 Power System is a modular power supply system from DEC, used in the BA11-K mounting box. In addition to main memory and device controllers on other PDP-11's, the BA11-K was used to hold PDP-11/04 and PDP-11/34 systems.
The H765 supplies a modest amount of +15V DC power to various backplanes mounted in the BA11-K, along with a line time clock signal, and AC and DC 'power OK' signals.
It also supplies 20-30V AC to several DEC standard modular regulators (up to four, in spaces numbered '1' through '4') mounted in the H765, which provide other voltages such as +5V to the backplanes in the mounting box.
Generally the power harness supports only a fixed arrangement as to which regulator can be in which spaces; e.g. the BA11-K harness mandates that #2 and #3 hold H744 +5V Regulators, #1 holds an H745 -15V Regulator, and #4 may hold an H754 +20V, -5V Regulator.
When the BA11-K is used in custom configurations to hold systems (such as the MJ11 memory system and MK11 memory system), other regulator configurations may be used, along with a custom harness; e.g. the MJ11 calls for two H744's and two H754's.
