Difference between revisions of "Installing v7 on SIMH"
From Computer History Wiki
(→installation) |
m (→Additional Information) |
||
| (16 intermediate revisions by 4 users not shown) | |||
| Line 1: | Line 1: | ||
| − | This is the procedure I'm using to install [[Seventh Edition | + | This is the procedure I'm using to install [[Unix Seventh Edition|Research Unix v7]] on [[SIMH]]'s [[PDP-11]] emulator. |
| − | I'm using the files from [[TUHS]] "/ | + | I'm using the files from [[TUHS]] "/Archive/Distributions/Research/Keith_Bostic_v7/" directory. I've also uploaded the resulting tape to [https://sourceforge.net/projects/bsd42/files/Install%20tapes/Research%20Unix/Unix-v7-Keith-Bostic.tap.bz2/download here]. |
If you are going to build the tape then you'll need the [[Mkdisttap.pl#Research Unix v7|mkdisttap.pl]] script to output a v7.tap file. | If you are going to build the tape then you'll need the [[Mkdisttap.pl#Research Unix v7|mkdisttap.pl]] script to output a v7.tap file. | ||
| + | NOTE: Comments at the end of a line of the form: | ||
| + | <pre> | ||
| + | [## Comment] | ||
| + | </pre> | ||
| + | are just to tell you what to do when there is ambiguity; please do not type them in literally! | ||
== Tape Install == | == Tape Install == | ||
| Line 10: | Line 15: | ||
=== tapei.ini === | === tapei.ini === | ||
<pre> | <pre> | ||
| + | cat > tapei.ini <<EOF | ||
set cpu 11/45 | set cpu 11/45 | ||
set cpu idle | set cpu idle | ||
| Line 15: | Line 21: | ||
att rp0 rp06-0.disk | att rp0 rp06-0.disk | ||
att tm0 v7.tap | att tm0 v7.tap | ||
| + | boot tm0 | ||
| + | EOF | ||
boot tm0 | boot tm0 | ||
</pre> | </pre> | ||
| Line 22: | Line 30: | ||
=== installation === | === installation === | ||
<pre> | <pre> | ||
| − | + | pdp11 tapei.ini | |
PDP-11 simulator V3.8-1 | PDP-11 simulator V3.8-1 | ||
Disabling XQ | Disabling XQ | ||
| − | Overwrite last track? [N] | + | RP: creating new file |
| + | Overwrite last track? [N] [## Just hit enter] | ||
Boot | Boot | ||
| − | : | + | : |
</pre> | </pre> | ||
I just hit enter to the "Overwrite last track" question, then the bootloader will appear. We are going to load the 3rd program on the tape, mkfs and format the 'a' partition. | I just hit enter to the "Overwrite last track" question, then the bootloader will appear. We are going to load the 3rd program on the tape, mkfs and format the 'a' partition. | ||
| Line 50: | Line 59: | ||
Tape? tm(0,5) | Tape? tm(0,5) | ||
Disk? hp(0,0) | Disk? hp(0,0) | ||
| − | Last chance before scribbling on disk. | + | Last chance before scribbling on disk. [## Just hit enter] |
End of tape | End of tape | ||
Boot | Boot | ||
| Line 57: | Line 66: | ||
Once the formatting is complete, then it'll drop back to the bootloader, and we are going to load the 4th program which is the restore program, and we'll restore the root partition. | Once the formatting is complete, then it'll drop back to the bootloader, and we are going to load the 4th program which is the restore program, and we'll restore the root partition. | ||
| − | Now we can boot up UNIX from the hard disk, and setup the OS. The console driver | + | Now we can boot up UNIX from the hard disk, and setup the OS. The console driver echoes everything in upper case letters, however all command are entered in lowercase. We'll set stty to lowercase and speed up carriage returns and linefeeds. |
<pre> | <pre> | ||
Boot | Boot | ||
: hp(0,0)hptmunix | : hp(0,0)hptmunix | ||
mem = 177344 | mem = 177344 | ||
| − | # | + | # STTY -LCASE NL0 CR0 |
| − | # | + | # |
| − | # | + | </pre> |
| − | + | ||
| − | + | Copy the kernel to unix and remove the extra versions. | |
| − | + | <pre> | |
| − | + | # mv hptmunix unix | |
| − | # | + | # rm hp*ix |
| − | # | + | # rm rp*ix |
| − | / | + | # ls *ix |
| − | / | + | unix |
| − | / | + | # |
| − | / | + | </pre> |
| − | / | + | |
| − | + | Create the RP06 devices in /dev. | |
| − | # | + | <pre> |
| − | / | + | # cd /dev |
| − | + | # make rp06 | |
| − | / | + | /etc/mknod rp0 b 6 0 |
| − | + | /etc/mknod swap b 6 1 | |
| − | # | + | /etc/mknod rp3 b 6 7 |
| − | + | /etc/mknod rrp0 c 14 0 | |
| − | + | /etc/mknod rrp3 c 14 7 | |
| − | + | chmod go-w rp0 swap rp3 rrp0 rrp3 | |
| − | + | # | |
| − | + | </pre> | |
| − | + | ||
| − | + | Create the TU10 devices in /dev. | |
| − | + | <pre> | |
| − | + | # make tm | |
| − | + | /etc/mknod mt0 b 3 0 | |
| − | + | /etc/mknod rmt0 c 12 0 | |
| − | + | /etc/mknod nrmt0 c 12 128 | |
| − | + | chmod go+w mt0 rmt0 nrmt0 | |
| − | |||
| − | |||
| − | |||
| − | |||
# | # | ||
| + | </pre> | ||
| + | |||
| + | Create an empty filesystem on the RP06 and check it. | ||
| + | <pre> | ||
| + | # cd / | ||
| + | # /etc/mkfs /dev/rp3 322278 | ||
| + | isize = 65496 | ||
| + | m/n = 3 500 | ||
| + | # icheck /dev/rp3 | ||
| + | /dev/rp3: | ||
| + | files 2 (r=1,d=1,b=0,c=0) | ||
| + | used 1 (i=0,ii=0,iii=0,d=1) | ||
| + | free 314088 | ||
| + | missing 0 | ||
| + | # | ||
| + | </pre> | ||
| + | |||
| + | Fastforward the tape and restore the /usr filesystem to the RP06. | ||
| + | <pre> | ||
| + | # dd if=/dev/r#nrmt0 of=/dev/null bs=20b files=6 | ||
| + | 202+80 records in | ||
| + | 202+75 records out | ||
| + | # restor rf /dev/rmt0 /dev/rp3 | ||
| + | Last chance before scribbling on /dev/rp3. [## Just hit enter] | ||
| + | End of tape | ||
| + | # | ||
| + | </pre> | ||
| + | |||
| + | Mount /usr, copy the bootblock to the RP06, sync and exit the sim. | ||
| + | <pre> | ||
| + | # /etc/mount /dev/rp3 /usr | ||
| + | # dd if=/usr/mdec/hpuboot of=/dev/rp0 count=1 | ||
| + | 0+1 records in | ||
| + | 0+1 records out | ||
| + | # sync | ||
| + | # sync | ||
| + | # sync | ||
| + | # sync | ||
| + | # [## Type CTRL-E (^E) here] | ||
Simulation stopped, PC: 002306 (MOV (SP)+,177776) | Simulation stopped, PC: 002306 (MOV (SP)+,177776) | ||
sim> q | sim> q | ||
| Line 106: | Line 150: | ||
</pre> | </pre> | ||
| − | == | + | == Normal boot == |
| − | + | Create a normal boot ini file for booting directly from the RP06. Note that SIMH will display Disabling XQ and wait for you to type boot to start the actual boot process on the RP06. | |
| − | === | + | === nboot.ini === |
<pre> | <pre> | ||
echo | echo | ||
| − | echo at the prompt type | + | echo After Disabling XQ is displayed type boot |
| − | + | echo and at the : prompt type hp(0,0)unix | |
echo | echo | ||
set cpu 11/70 | set cpu 11/70 | ||
| Line 120: | Line 164: | ||
set rp0 rp06 | set rp0 rp06 | ||
att rp0 rp06-0.disk | att rp0 rp06-0.disk | ||
| − | + | boot rp0 | |
| − | boot | ||
</pre> | </pre> | ||
| Line 127: | Line 170: | ||
<pre> | <pre> | ||
| − | + | pdp11 nboot.ini | |
PDP-11 simulator V3.8-1 | PDP-11 simulator V3.8-1 | ||
| − | at the prompt type | + | After Disabling XQ is displayed type boot |
| − | + | and at the : prompt type hp(0,0)unix | |
Disabling XQ | Disabling XQ | ||
| + | boot [## Type boot here to get the actual boot prompt] | ||
Boot | Boot | ||
: hp(0,0)unix | : hp(0,0)unix | ||
mem = 2020544 | mem = 2020544 | ||
| − | # RESTRICTED RIGHTS: USE, DUPLICATION, OR DISCLOSURE | + | # [## Type CTRL-D (^D) here to enter multi-user mode] |
| + | |||
| + | RESTRICTED RIGHTS: USE, DUPLICATION, OR DISCLOSURE | ||
IS SUBJECT TO RESTRICTIONS STATED IN YOUR CONTRACT WITH | IS SUBJECT TO RESTRICTIONS STATED IN YOUR CONTRACT WITH | ||
WESTERN ELECTRIC COMPANY, INC. | WESTERN ELECTRIC COMPANY, INC. | ||
| − | WED DEC 31 19: | + | WED DEC 31 19:03:27 EST 1969 |
login: root | login: root | ||
Password: | Password: | ||
You have mail. | You have mail. | ||
| − | # | + | # [## Type CTRL-E (^E) here] |
| + | |||
| + | Simulation stopped, PC: 002306 (MOV (SP)+,177776) | ||
| + | sim> q | ||
| + | Goodbye | ||
</pre> | </pre> | ||
| − | The default root password is ' | + | The default root password is 'root'. |
| + | |||
| + | == Additional Information == | ||
| + | |||
| + | A longer tutorial describing the installation and configuration process in additional detail is available online [https://decuser.blogspot.com/2015/12/installing-and-using-research-unix.html here] and as a printable PDF [https://drive.google.com/file/d/1Qqg41b2On-VpP9qjpXAEi8hV4RurgC92/view?usp=sharing here]. As of November, 4, 2017, version 1.6 of the tutorial covers the basic installation from tape to disk, booting from the disk, reconfiguring the system, rebuilding the kernel, logging in as root, and as dmr, sending and reading system mail, and enabling the V7 instance and SimH to allow multiple sessions from the host machine to the instance via Telnet. | ||
| + | |||
| + | If you wish to use the backspace key when your terminal sends ^? (DEL) and Ctrl-C as interrupt character during login and everywhere else, apply [https://vpsland.superglobalmegacorp.com/backspace.diff this patch] to the kernel and rebuild the system. | ||
| + | |||
| + | ==See also== | ||
| + | * [[Setting Up Unix - Seventh Edition]] | ||
| + | * [[Installing Unix Seventh Edition]] | ||
[[Category: SIMH Tutorials]] | [[Category: SIMH Tutorials]] | ||
Latest revision as of 00:10, 22 July 2020
This is the procedure I'm using to install Research Unix v7 on SIMH's PDP-11 emulator.
I'm using the files from TUHS "/Archive/Distributions/Research/Keith_Bostic_v7/" directory. I've also uploaded the resulting tape to here.
If you are going to build the tape then you'll need the mkdisttap.pl script to output a v7.tap file.
NOTE: Comments at the end of a line of the form:
[## Comment]
are just to tell you what to do when there is ambiguity; please do not type them in literally!
Contents
Tape Install
tapei.ini
cat > tapei.ini <<EOF set cpu 11/45 set cpu idle set rp0 rp06 att rp0 rp06-0.disk att tm0 v7.tap boot tm0 EOF boot tm0
with the config in hand, then let's install.
installation
pdp11 tapei.ini PDP-11 simulator V3.8-1 Disabling XQ RP: creating new file Overwrite last track? [N] [## Just hit enter] Boot :
I just hit enter to the "Overwrite last track" question, then the bootloader will appear. We are going to load the 3rd program on the tape, mkfs and format the 'a' partition.
Boot : tm(0,3) file sys size: 5000 file system: hp(0,0) isize = 1600 m/n = 3 500 Exit called Boot :
The block size comes out of pre-compiled disk sizes in the kernel. Unix back then wasn't as dynamic as what we like in these modern times...
Boot : tm(0,4) Tape? tm(0,5) Disk? hp(0,0) Last chance before scribbling on disk. [## Just hit enter] End of tape Boot :
Once the formatting is complete, then it'll drop back to the bootloader, and we are going to load the 4th program which is the restore program, and we'll restore the root partition.
Now we can boot up UNIX from the hard disk, and setup the OS. The console driver echoes everything in upper case letters, however all command are entered in lowercase. We'll set stty to lowercase and speed up carriage returns and linefeeds.
Boot : hp(0,0)hptmunix mem = 177344 # STTY -LCASE NL0 CR0 #
Copy the kernel to unix and remove the extra versions.
# mv hptmunix unix # rm hp*ix # rm rp*ix # ls *ix unix #
Create the RP06 devices in /dev.
# cd /dev # make rp06 /etc/mknod rp0 b 6 0 /etc/mknod swap b 6 1 /etc/mknod rp3 b 6 7 /etc/mknod rrp0 c 14 0 /etc/mknod rrp3 c 14 7 chmod go-w rp0 swap rp3 rrp0 rrp3 #
Create the TU10 devices in /dev.
# make tm /etc/mknod mt0 b 3 0 /etc/mknod rmt0 c 12 0 /etc/mknod nrmt0 c 12 128 chmod go+w mt0 rmt0 nrmt0 #
Create an empty filesystem on the RP06 and check it.
# cd / # /etc/mkfs /dev/rp3 322278 isize = 65496 m/n = 3 500 # icheck /dev/rp3 /dev/rp3: files 2 (r=1,d=1,b=0,c=0) used 1 (i=0,ii=0,iii=0,d=1) free 314088 missing 0 #
Fastforward the tape and restore the /usr filesystem to the RP06.
# dd if=/dev/r#nrmt0 of=/dev/null bs=20b files=6 202+80 records in 202+75 records out # restor rf /dev/rmt0 /dev/rp3 Last chance before scribbling on /dev/rp3. [## Just hit enter] End of tape #
Mount /usr, copy the bootblock to the RP06, sync and exit the sim.
# /etc/mount /dev/rp3 /usr # dd if=/usr/mdec/hpuboot of=/dev/rp0 count=1 0+1 records in 0+1 records out # sync # sync # sync # sync # [## Type CTRL-E (^E) here] Simulation stopped, PC: 002306 (MOV (SP)+,177776) sim> q Goodbye
Normal boot
Create a normal boot ini file for booting directly from the RP06. Note that SIMH will display Disabling XQ and wait for you to type boot to start the actual boot process on the RP06.
nboot.ini
echo echo After Disabling XQ is displayed type boot echo and at the : prompt type hp(0,0)unix echo set cpu 11/70 set cpu 2M set cpu idle set rp0 rp06 att rp0 rp06-0.disk boot rp0
And let's boot up!
pdp11 nboot.ini PDP-11 simulator V3.8-1 After Disabling XQ is displayed type boot and at the : prompt type hp(0,0)unix Disabling XQ boot [## Type boot here to get the actual boot prompt] Boot : hp(0,0)unix mem = 2020544 # [## Type CTRL-D (^D) here to enter multi-user mode] RESTRICTED RIGHTS: USE, DUPLICATION, OR DISCLOSURE IS SUBJECT TO RESTRICTIONS STATED IN YOUR CONTRACT WITH WESTERN ELECTRIC COMPANY, INC. WED DEC 31 19:03:27 EST 1969 login: root Password: You have mail. # [## Type CTRL-E (^E) here] Simulation stopped, PC: 002306 (MOV (SP)+,177776) sim> q Goodbye
The default root password is 'root'.
Additional Information
A longer tutorial describing the installation and configuration process in additional detail is available online here and as a printable PDF here. As of November, 4, 2017, version 1.6 of the tutorial covers the basic installation from tape to disk, booting from the disk, reconfiguring the system, rebuilding the kernel, logging in as root, and as dmr, sending and reading system mail, and enabling the V7 instance and SimH to allow multiple sessions from the host machine to the instance via Telnet.
If you wish to use the backspace key when your terminal sends ^? (DEL) and Ctrl-C as interrupt character during login and everywhere else, apply this patch to the kernel and rebuild the system.
