Difference between revisions of "RP04 disk drive"
From Computer History Wiki
m (+See also) |
m (→External links: +manuals) |
||
| Line 35: | Line 35: | ||
* [[RP05 disk drive]] | * [[RP05 disk drive]] | ||
* [[RP06 disk drive]] | * [[RP06 disk drive]] | ||
| + | |||
| + | ==External links== | ||
| + | |||
| + | * [http://www.bitsavers.org/pdf/dec/disc/rp04/DEC11-HRJPA-B-D_RJP04_Disk_Subsystem_Maintenance_Aug74.pdf RJP04 moving head disk subsystem maintenance manual] (DEC11-HRJPA-B-D) | ||
| + | * [http://www.bitsavers.org/pdf/dec/disc/rp04/UP002511-1_RP04_ISS_733_Parts_Jan76.pdf UP002511-1 Disk Storage Drive Model 733 DEC Parts Catalog] | ||
[[Category: MASSBUS Devices]] | [[Category: MASSBUS Devices]] | ||
[[Category: DEC Disk Drives]] | [[Category: DEC Disk Drives]] | ||
Revision as of 20:43, 22 August 2022
| RP04 | |
| Manufacturer: | Sperry Univac ISS (basic drive), Digital Equipment Corporation (electronics) |
|---|---|
| Drive Controller(s): | RH10 (PDP-10) RH11 (UNIBUS) RH70 (PDP-11/70) |
| Capacity: | 88 Mbytes |
| Transfer Rate: | 2.5 usec/word |
| Average Access Time: | 36.3 msec |
| Revolutions per Minute: | 3600 |
| 1/2 Revolution Time: | 8.3 msec |
| One Track Seek Time: | 7 msec |
| Average Seek Time: | 28 msec |
| Maximum Seek Time: | 50 msec |
| Total Surfaces: | 19 |
| Tracks per Surface: | 411 |
| Sectors per Track: | 22 |
| Words per Sector: | 256 |
| Density: | 4040 bpi (maximum) |
| Recording Method: | Modified Frequency Modulation (MFM) |
| Physical Size: | 31" W x 40" H x 32" L |
| Weight: | 600 pounds |
| Power Consumption: | 660 VA per phase (running); 3300 VA per phase (starting, 10 seconds max) |
The RP04 was the successor to the RP03 multi-platter large disk drive, and the predecessor to the later RP05. It used a pack compatible with the IBM 3336 pack, used on the IBM 3330 drive.
The actual drive was produced by the Information Storage Systems (ISS) division of Sperry Univac (a model 733-10), and OEM'd by DEC, who added interface electronics.
It was the first large drive to use the MASSBUS bus; thus, it did not have a specific device controller, but used the appropriate MASSBUS controller. A maximum of 8 drives were supported per controller.
