Difference between revisions of "DM11-BA Modem Control Multiplexor"
m (→Further reading: in fiche) |
m (New cat scheme) |
||
Line 17: | Line 17: | ||
* [https://manx-docs.org/collections/antonio/dec/kmsbeug1.pdf KMS11-BD/BE Synchronous Communication Processor User Guide] (EK-KMSBE-UG-001) - contains moderately detailed information on the DM11-BA in various places | * [https://manx-docs.org/collections/antonio/dec/kmsbeug1.pdf KMS11-BD/BE Synchronous Communication Processor User Guide] (EK-KMSBE-UG-001) - contains moderately detailed information on the DM11-BA in various places | ||
− | [[Category: UNIBUS | + | [[Category: UNIBUS Asynchronous Serial Interfaces]] |
− | + | [[Category: UNIBUS Synchronous Serial Interfaces]] | |
− | [[Category: |
Latest revision as of 01:40, 16 February 2023
The DM11-BA Modem Control Multiplexor allows synchronous and asynchronous serial lines connected to a UNIBUS device controller to be connected to modems. It could be set to interrupt the CPU when a modem control line (Ring, Carrier, etc) changed state.
It is a re-implementation of the DM11-BB Modem Control Option; however, instead of plugging into a controller backplane like the -BB, the -BA plugs into a standard UNIBUS MUD slot. It is program compatible with the DM11-BB (although a single DM11-BA only supports 8 lines, unlike the DM11-BB, which handled 16).
It is implemented as a single hex board, the M8640. Its interrupt vector and register addresses are set by a pair of DIP switches (and a jumper (W1) for one bit of the address, on etch revision B boards). A UNIBUS priority plug is also present.
It connects, using two flat cables plugged into Berg headers on the board, to a passive distribution panel; either the H317-M or the functionally identical H317-P (the latter has improved EMI shielding).
Further reading
- DM11-BA Modem Control Multiplexor (YM-C138C-00) - not available online, but in fiche
External links
- KMS11-BD/BE Synchronous Communication Processor User Guide (EK-KMSBE-UG-001) - contains moderately detailed information on the DM11-BA in various places