Difference between revisions of "Maxc"

From Computer History Wiki
Jump to: navigation, search
(Typo.)
m (→‎External links: +Original boards from a Xerox MAXC Time Sharing System)
 
(12 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
[[Image:Maxc.jpg|300px|right|thumb|Xerox Maxc]]
 
[[Image:Maxc.jpg|300px|right|thumb|Xerox Maxc]]
  
−
'''Maxc1''' and '''Maxc2''' (often capitalized '''MAXC''') were a pair of [[PDP-10]] clones made at [[Xerox PARC]], after the Xerox corporate level objected to the acquisition of machines from outside the company, instead of from Xerox's subsidiary, Xerox Data Systems - [[Scientific Data Systems]] before it was acquired by Xerox. (They chose the PDP-10 as they wanted to be able to run [[INTERLISP]].)
+
'''Maxc1''' and '''Maxc2''' (originally capitalized '''MAXC''' - an acronym for 'Multiple Access Xerox Computer') were a pair of [[PDP-10]] clones made at [[Xerox PARC]], after the Xerox corporate level objected to the acquisition of machines from outside the company, instead of from Xerox's subsidiary, Xerox Data Systems - [[Scientific Data Systems]] before it was acquired by Xerox. (They chose the PDP-10 as they wanted to be able to run [[INTERLISP]].)
  
 
They were [[microcode]]d machines, using an 72-bit [[instruction|microinstruction]]. They contained 2K [[word]]s of microcode, and microinstructions executed in 200 nsec (Maxc1); 4K words, at 150 nsec (Maxc2). The hardware supported up to 16 levels of [[subroutine]] calls in the microcode. This capability was used to support bulk data transfers (from [[disk]] [[mass storage]]); a technique which was later used in the [[Xerox Alto|Alto]].
 
They were [[microcode]]d machines, using an 72-bit [[instruction|microinstruction]]. They contained 2K [[word]]s of microcode, and microinstructions executed in 200 nsec (Maxc1); 4K words, at 150 nsec (Maxc2). The hardware supported up to 16 levels of [[subroutine]] calls in the microcode. This capability was used to support bulk data transfers (from [[disk]] [[mass storage]]); a technique which was later used in the [[Xerox Alto|Alto]].
  
−
In addition to a PDP-10-compatible mode, MAXC microcode also implemented a '''Byte Lisp''' mode with 9-bit instructions specially tailored for [[LISP]].  The INTERLISP compiler and runtime has support for this instruction set under a MAXC condition, and the MAXC monitor has special JSYS calls to facilitate Byte Lisp code.
+
In addition to a PDP-10-compatible mode, Maxc microcode also implemented a '''[[Maxc Byte Lisp|Byte Lisp]]''' mode with 9-bit instructions specially tailored for [[LISP]].  The INTERLISP compiler and runtime has support for this instruction set under a Maxc condition, and the Maxc monitor has special JSYS calls to facilitate Byte Lisp code.
  
 
A [[front end]] (a [[Data General Nova]] on Maxc1, and an Alto on Maxc2) was used to load and [[debug]] the microcode; all the [[input/output]] [[peripheral]]s other than the disks were also connected to the front end.
 
A [[front end]] (a [[Data General Nova]] on Maxc1, and an Alto on Maxc2) was used to load and [[debug]] the microcode; all the [[input/output]] [[peripheral]]s other than the disks were also connected to the front end.
Line 11: Line 11:
 
The [[main memory]] was built out of then-novel [[Dynamic RAM|DRAM]] [[integrated circuit|chips]] from [[Intel]], the new [[Intel 1103]] 1Kx1 chip. It used [[error-correcting code|ECC]] to produce reliable memory; with a [[word]] length of 48 bits (compared to the PDP-10's native length of 36 bits; only 7 of the extra 12 bits were used for the ECC), it could correct all single-bit errors, and detect (but not correct) double-bit errors. Thus, single failed chips could be ignored, and replaced during scheduled maintenance.
 
The [[main memory]] was built out of then-novel [[Dynamic RAM|DRAM]] [[integrated circuit|chips]] from [[Intel]], the new [[Intel 1103]] 1Kx1 chip. It used [[error-correcting code|ECC]] to produce reliable memory; with a [[word]] length of 48 bits (compared to the PDP-10's native length of 36 bits; only 7 of the extra 12 bits were used for the ECC), it could correct all single-bit errors, and detect (but not correct) double-bit errors. Thus, single failed chips could be ignored, and replaced during scheduled maintenance.
  
−
They ran the [[TENEX]] [[operating system]]; to do this, Maxc implemented [[virtual memory]] mechanisms comparable to those added to the [[KA10]] by [[Bolt, Beranek, and Newman|BBN]], including a 1024x18 bit mapping memory.
+
They ran the [[TENEX]] [[operating system]]; to do this, Maxc implemented [[virtual memory]] mechanisms comparable to those added to the [[KA10]] by the [[BBN Pager]], including a 1024x18 bit mapping memory. Both Maxc machines also supported [[PARC Universal Packet|PUP]].
  
−
Maxcl built during the period from February 1971 to April 1973; it was de-commissioned early in 1981. Maxc2 was built between June 1975 and April 1977.
+
Maxc1 was built during the period from February 1971 to April 1973; it was de-commissioned early in 1981. Maxc2 was built between June 1975 and April 1977.
  
 
{{semi-stub}}
 
{{semi-stub}}
Line 29: Line 29:
 
** [http://www.bitsavers.org/pdf/xerox/maxc/MAXC_8.2_Spec.pdf The MAXC Microprocessor]
 
** [http://www.bitsavers.org/pdf/xerox/maxc/MAXC_8.2_Spec.pdf The MAXC Microprocessor]
 
* [http://www.softwarepreservation.org/projects/LISP/interlisp-d/Deutsch-3IJCAI.pdf A LISP Machine with Very Compact Programs], L. Peter Deutsch, 1973.
 
* [http://www.softwarepreservation.org/projects/LISP/interlisp-d/Deutsch-3IJCAI.pdf A LISP Machine with Very Compact Programs], L. Peter Deutsch, 1973.
−
* [https://github.com/PDP-10/maxc/tree/master/monitor Maxc monitor sources (and other files related to PUP)]
+
* [https://github.com/PDP-10/maxc/tree/master/monitor Monitor] - Maxc monitor sources (and other files related to PUP)]
−
* [https://xeroxalto.computerhistory.org/_cd8_/pup/.index.html Alto directory with some Maxc files], i.e. .MAC, .SAV, .REL, .UNV.
+
* [https://xeroxalto.computerhistory.org/ Xerox PARC Alto filesystem archive]
 +
** [https://xeroxparcarchive.computerhistory.org/indigo/maxc/.index.html Maxc material]
 +
*** [https://xeroxparcarchive.computerhistory.org/indigo/maxc/maxc12microcode.dm!3_/.index.html Microcode]
 +
*** [https://xeroxparcarchive.computerhistory.org/indigo/maxc/diagnostics/.index.html Diagnostics]
 +
*** [https://xeroxparcarchive.computerhistory.org/indigo/maxc/maxc12diag.dm!1_/.index.html Microcode diagnostics]
 +
**** [https://xeroxparcarchive.computerhistory.org/indigo/maxc/MaxcOperations0-24Press.Dm!3_/.MaxcOps0.Press.pdf Maxc Operations] - [https://raw.githubusercontent.com/PDP-10/maxc/master/pdf/MaxcOperations0-24.press.pdf All files in one document]
 +
*** [https://raw.githubusercontent.com/PDP-10/maxc/master/pdf/Maxc-room.pdf Maxc machine room]
 +
* [https://www.digibarn.com/collections/parts/maxc-board/ Original boards from a Xerox MAXC Time Sharing System]
  
−
[[Category: PDP-10s]]
+
[[Category: PDP-10 Systems]]
 +
[[Category: Xerox Mainframes]]
 +
[[Category: Unique Computers]]

Latest revision as of 00:43, 17 February 2024

Xerox Maxc

Maxc1 and Maxc2 (originally capitalized MAXC - an acronym for 'Multiple Access Xerox Computer') were a pair of PDP-10 clones made at Xerox PARC, after the Xerox corporate level objected to the acquisition of machines from outside the company, instead of from Xerox's subsidiary, Xerox Data Systems - Scientific Data Systems before it was acquired by Xerox. (They chose the PDP-10 as they wanted to be able to run INTERLISP.)

They were microcoded machines, using an 72-bit microinstruction. They contained 2K words of microcode, and microinstructions executed in 200 nsec (Maxc1); 4K words, at 150 nsec (Maxc2). The hardware supported up to 16 levels of subroutine calls in the microcode. This capability was used to support bulk data transfers (from disk mass storage); a technique which was later used in the Alto.

In addition to a PDP-10-compatible mode, Maxc microcode also implemented a Byte Lisp mode with 9-bit instructions specially tailored for LISP. The INTERLISP compiler and runtime has support for this instruction set under a Maxc condition, and the Maxc monitor has special JSYS calls to facilitate Byte Lisp code.

A front end (a Data General Nova on Maxc1, and an Alto on Maxc2) was used to load and debug the microcode; all the input/output peripherals other than the disks were also connected to the front end.

The main memory was built out of then-novel DRAM chips from Intel, the new Intel 1103 1Kx1 chip. It used ECC to produce reliable memory; with a word length of 48 bits (compared to the PDP-10's native length of 36 bits; only 7 of the extra 12 bits were used for the ECC), it could correct all single-bit errors, and detect (but not correct) double-bit errors. Thus, single failed chips could be ignored, and replaced during scheduled maintenance.

They ran the TENEX operating system; to do this, Maxc implemented virtual memory mechanisms comparable to those added to the KA10 by the BBN Pager, including a 1024x18 bit mapping memory. Both Maxc machines also supported PUP.

Maxc1 was built during the period from February 1971 to April 1973; it was de-commissioned early in 1981. Maxc2 was built between June 1975 and April 1977.

Further reading

  • Michael A. Hiltzik, Dealers of Lightning: Xerox PARC and the Dawn of the Computer Age, HarperBusiness, New York, 1999 - pp. 99-116

External links

Retrieved from "https://gunkies.org/w/index.php?title=Maxc&oldid=33521"