Difference between revisions of "MRV11-D Universal Programmable Read-Only Memory"
From Computer History Wiki
(Section "Boot ROM usage" added) |
m (Re-classify) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 5: | Line 5: | ||
==Boot ROM usage== | ==Boot ROM usage== | ||
| − | You can use the [[MXV11]] | + | You can use the [[MXV11-B Multifunction Option Module|MXV11-B2]] ROM chip set ([https://github.com/larsbrinkhoff/DECROMs 23-145E4-00 / 23-146E4-00]) to convert the MRV11-D into a boot module for [[QBUS]] [[PDP-11]]s capable of booting from: |
* [[RL01]] / [[RL02]] (DL) | * [[RL01]] / [[RL02]] (DL) | ||
* [[RX01]] / [[RX02]] (DX,DY) | * [[RX01]] / [[RX02]] (DX,DY) | ||
| Line 13: | Line 13: | ||
* [[DECnet]] via [[DPV11, [[DLV11-E]], [[DLV11-F]], [[DUV11]] | * [[DECnet]] via [[DPV11, [[DLV11-E]], [[DLV11-F]], [[DUV11]] | ||
| − | {{stub}} | + | {{semi-stub}} |
==See also== | ==See also== | ||
Latest revision as of 01:26, 13 October 2024
The MRV11-D Universal Programmable Read-Only Memory was a QBUS ROM card. It held up to sixteen 28-pin chips; these could be either ROMs/PROMs/EPROMs (of up to 8-bit x 32K size), or static RAMs. It thus held up to 512KB when fully populated. Configuration is done with a combination of jumpers and two DIP switches.
The entire ROM contents were either directly visible on the QBUS, or through two independent 2KB windows (somewhat like later, larger UNIBUS ROM cards). The MRV11-A was a dual-height card, the M8578.
Boot ROM usage
You can use the MXV11-B2 ROM chip set (23-145E4-00 / 23-146E4-00) to convert the MRV11-D into a boot module for QBUS PDP-11s capable of booting from:
- RL01 / RL02 (DL)
- RX01 / RX02 (DX,DY)
- TU58 (DD)
- TSV05 (MS)
- MSCP type Devices e.g. RD51, RX50 (DU)
- DECnet via [[DPV11, DLV11-E, DLV11-F, DUV11
See also
External links
- Microcomputer Products Handbook - the MRV11-D is covered in Chapter 11 (pp. 171-184 of the PDF)
- MRV11-D Universal PROM Module (EK-MRV1D-UG-001)
