Difference between revisions of "MS11 32KB MOS memory"

From Computer History Wiki
Jump to: navigation, search
(+External links - manuals, FMPS)
m (Avoid dab)
 
Line 1: Line 1:
The '''MS11-E''', '''MS11-F''', '''MS11-H''' and '''MS11-J''' are the different configurations of [[Digital Equipment Corporation|DEC]]'s first commodity [[Metal Oxide Semiconductor|MOS]] [[UNIBUS]] [[main memory]] card, the '''M7847'''. They plug into a [[Modified UNIBUS Device|MUD]] [[backplane]] (only; not [[Small Peripheral Controller|SPC]]).  
+
The '''MS11-E''', '''MS11-F''', '''MS11-H''' and '''MS11-J''' are the different configurations of [[Digital Equipment Corporation|DEC]]'s first commodity [[Metal Oxide Semiconductor|MOS]] [[UNIBUS]] [[main memory]] card, the '''M7847'''. They plug into a [[Modified UNIBUS Device|MUD]] [[backplane]] (''only''; not [[Small Peripheral Controller|SPC]]).  
  
 
Fully populated with 4Kx1 [[Dynamic RAM|DRAM]] [[integrated circuit|chips]], it is known as the MS11-J, and holds 32K [[byte]]s. The quarter-, half- and three-quarter-populated versions are the MS11-E, -F and -H, respectively; with 8KB, 16KB and 24KB. (The '-G' is almost certainly not part of the sequence since 'G' is not in the [[DEC alphabet]].)
 
Fully populated with 4Kx1 [[Dynamic RAM|DRAM]] [[integrated circuit|chips]], it is known as the MS11-J, and holds 32K [[byte]]s. The quarter-, half- and three-quarter-populated versions are the MS11-E, -F and -H, respectively; with 8KB, 16KB and 24KB. (The '-G' is almost certainly not part of the sequence since 'G' is not in the [[DEC alphabet]].)
  
There are [[parity]] versions of each; the '''MS11-EP''', '''-FP''', '''-HP''' and '''-JP'''; to have the parity operate, these require an [[M7850 parity controller]] in the same backplane as the memory card. The M7847 is a [[DEC card form factor|hex]] card, so it cannot go in the end slots of the backplane.
+
There are [[parity]] versions of each; the '''MS11-EP''', '''-FP''', '''-HP''' and '''-JP'''; to have the parity operate, these require an [[M7850 parity controller]] in the same backplane as the memory card. The M7847 is a [[DEC card form factor|hex]] card, so it cannot go in the end slots of the backplane.
  
The [[access time]] is 550 nsec (1250 nsec maximum on [[refresh]] conflict), and the [[cycle time]] is 700 nsec (1400 nsec maximum on refresh conflict). Refresh cycle time is 25 μsec (typical), 22.5 μsec (minimum).
+
The [[access time]] is 550 nsec (1250 nsec maximum on [[memory refresh]] conflict), and the [[cycle time]] is 700 nsec (1400 nsec maximum on refresh conflict). Refresh cycle time is 25 μsec (typical), 22.5 μsec (minimum).
  
 
The board has provision to use battery backup power to retain data during a power outage. Configuration is by [[Dual Inline Package|DIP]] switches; the first DEC memory to do so.
 
The board has provision to use battery backup power to retain data during a power outage. Configuration is by [[Dual Inline Package|DIP]] switches; the first DEC memory to do so.

Latest revision as of 20:14, 21 September 2022

The MS11-E, MS11-F, MS11-H and MS11-J are the different configurations of DEC's first commodity MOS UNIBUS main memory card, the M7847. They plug into a MUD backplane (only; not SPC).

Fully populated with 4Kx1 DRAM chips, it is known as the MS11-J, and holds 32K bytes. The quarter-, half- and three-quarter-populated versions are the MS11-E, -F and -H, respectively; with 8KB, 16KB and 24KB. (The '-G' is almost certainly not part of the sequence since 'G' is not in the DEC alphabet.)

There are parity versions of each; the MS11-EP, -FP, -HP and -JP; to have the parity operate, these require an M7850 parity controller in the same backplane as the memory card. The M7847 is a hex card, so it cannot go in the end slots of the backplane.

The access time is 550 nsec (1250 nsec maximum on memory refresh conflict), and the cycle time is 700 nsec (1400 nsec maximum on refresh conflict). Refresh cycle time is 25 μsec (typical), 22.5 μsec (minimum).

The board has provision to use battery backup power to retain data during a power outage. Configuration is by DIP switches; the first DEC memory to do so.

External links