Difference between revisions of "32v 1m iostat"
(New page: IOSTAT(1M) UNIX Programmer's Manual IOSTAT(1M) == NAME == iostat - report I/O statistics == SYNOPSIS == iostat [ option ] ... [ interval [ count ] ] == D...) |
|||
| Line 4: | Line 4: | ||
== NAME == | == NAME == | ||
| − | + | iostat - report I/O statistics | |
== SYNOPSIS == | == SYNOPSIS == | ||
| − | + | iostat [ option ] ... [ interval [ count ] ] | |
== DESCRIPTION == | == DESCRIPTION == | ||
| − | + | '''Iostat''' delves into the system and reports certain statistics | |
| − | + | kept about input-output activity. Information is kept about | |
| − | + | up to three different disks (RF, RK, RP) and about terminals. For each disk, IO completions and number of words | |
| − | + | transferred are counted; for terminals collectively, the | |
| − | + | number of input and output characters are counted. Also, | |
| − | + | each sixtieth of a second, the state of each disk is examined and a tally is made if the disk is active. The tally | |
| − | + | goes into one of four categories, depending on whether the | |
| − | + | system is executing in user mode, in `nice' (background) | |
| − | + | user mode, in system mode, or idle. From all these numbers | |
| − | + | and from the known transfer rates of the devices it is possible to determine information such as the degree of IO | |
| − | + | overlap and average seek times for each device. | |
| − | |||
| − | |||
| − | |||
| − | + | The optional '''interval''' argument causes '''iostat''' to report once each '''interval''' seconds. The first report is for all time since a reboot and each subsequent report is for the last interval only. | |
| − | |||
| − | |||
| − | |||
| − | + | The optional '''count''' argument restricts the number of reports. | |
| − | + | With no option argument '''iostat''' reports for each disk the | |
| − | + | number of transfers per minute, the milliseconds per average | |
| − | + | seek, and the milliseconds per data transfer exclusive of | |
| − | + | seek time. It also gives the percentage of time the system | |
| − | + | has spend in each of the four categories mentioned above. | |
| − | + | The following options are available: | |
| − | + | -t Report the number of characters of terminal IO per second as well. | |
| − | |||
| − | + | -i Report the percentage of time spend in each of the four categories mentioned above, the percentage of time each disk was active (seeking or transferring), the percentage of time any disk was active, and the percentage of time spent in `IO wait:' idle, but with a disk active. | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | -s Report the raw timing information: 32 numbers indicating the percentage of time spent in each of the possible configurations of 4 system states and 8 IO states (3 disks each active or not). | |
| − | |||
| − | |||
| − | |||
| − | + | -b Report on the usage of IO buffers. | |
== FILES == | == FILES == | ||
| − | + | /dev/kmem, /unix | |
[[Category:32v man section 1]] | [[Category:32v man section 1]] | ||
Latest revision as of 20:44, 26 October 2009
IOSTAT(1M) UNIX Programmer's Manual IOSTAT(1M)
Contents
NAME
iostat - report I/O statistics
SYNOPSIS
iostat [ option ] ... [ interval [ count ] ]
DESCRIPTION
Iostat delves into the system and reports certain statistics kept about input-output activity. Information is kept about up to three different disks (RF, RK, RP) and about terminals. For each disk, IO completions and number of words transferred are counted; for terminals collectively, the number of input and output characters are counted. Also, each sixtieth of a second, the state of each disk is examined and a tally is made if the disk is active. The tally goes into one of four categories, depending on whether the system is executing in user mode, in `nice' (background) user mode, in system mode, or idle. From all these numbers and from the known transfer rates of the devices it is possible to determine information such as the degree of IO overlap and average seek times for each device.
The optional interval argument causes iostat to report once each interval seconds. The first report is for all time since a reboot and each subsequent report is for the last interval only.
The optional count argument restricts the number of reports.
With no option argument iostat reports for each disk the number of transfers per minute, the milliseconds per average seek, and the milliseconds per data transfer exclusive of seek time. It also gives the percentage of time the system has spend in each of the four categories mentioned above.
The following options are available:
-t Report the number of characters of terminal IO per second as well.
-i Report the percentage of time spend in each of the four categories mentioned above, the percentage of time each disk was active (seeking or transferring), the percentage of time any disk was active, and the percentage of time spent in `IO wait:' idle, but with a disk active.
-s Report the raw timing information: 32 numbers indicating the percentage of time spent in each of the possible configurations of 4 system states and 8 IO states (3 disks each active or not).
-b Report on the usage of IO buffers.
FILES
/dev/kmem, /unix
