Difference between revisions of "RK11-C disk controller"
(→Module Utilization Chart: update to drawing) |
m (tweak descs) |
||
| Line 44: | Line 44: | ||
| M119 || 2 || 3 x 8-Input NAND gates | | M119 || 2 || 3 x 8-Input NAND gates | ||
|- | |- | ||
| − | | M121 || 3 || AND | + | | M121 || 3 || AND/NOR gates |
|- | |- | ||
| − | | M141 || 2 || | + | | M141 || 2 || NAND/NOR gates |
|- | |- | ||
| − | | M149 || 10 || | + | | M149 || 10 || 9 x 2-NAND wired OR matrix |
|- | |- | ||
| M161 || || Binary to octal/decimal decoder | | M161 || || Binary to octal/decimal decoder | ||
| Line 54: | Line 54: | ||
| M163 || || Dual binary to decimal decoder | | M163 || || Dual binary to decimal decoder | ||
|- | |- | ||
| − | | M203 || 4 || SR flip-flops | + | | M203 || 4 || 8 x SR flip-flops |
|- | |- | ||
| M205 || 3 || 5 x 'D' flip-flops | | M205 || 3 || 5 x 'D' flip-flops | ||
|- | |- | ||
| − | | M207 || || Flip-flops (3-3 configuration) | + | | M207 || || J-K Flip-flops (3-3 configuration) |
|- | |- | ||
| − | | M208 || 2 || | + | | M208 || 2 || 8-bit buffer shift register |
|- | |- | ||
| − | | M214 || 3 || | + | | M214 || 3 || 6-bit register |
|- | |- | ||
| M216 || 5 || 6 x flip-flops | | M216 || 5 || 6 x flip-flops | ||
| Line 80: | Line 80: | ||
| M611 || || High speed power inverter | | M611 || || High speed power inverter | ||
|- | |- | ||
| − | | M617 || || 6 x 4-input | + | | M617 || || 6 x 4-input NAND buffers |
|- | |- | ||
| M623 || 3 || Bus driver | | M623 || 3 || Bus driver | ||
Revision as of 02:59, 21 November 2016
The RK11-C is the earliest version of the RK11 disk controller. (Nothing is known of the -A and -B, if they ever existed as products.)
Like many of the earlier large peripheral controllers for the PDP-11, it was a large custom wire-wrapped backplane which bolted into the front of a 19 inch rack, such as an H960; into it plugged about 40 small M-Series FLIP CHIPs.
The backplane is wired for connection to a standard DEC indicator panel, but no inlay for such has even been sighted, although the RK11-C Engineering Drawings allow one to work out exactly what such an inlay would have looked like.
There is also a rare variant of the RK11-C, the 'Double Buffer' RK11-C.
Contents
RK11-C module count/location tables
The following tables give a listing of the Flip Chips used in the RK11-C, and their location in the backplane.
Module counts
(Drawn from module utilization drawing, confirmed in module count chart):
Single height boards:
| Type | Count | Function |
|---|---|---|
| G736 | Jumper | |
| G740 | Disk selection | |
| M002 | 15 Loads | |
| M105 | Address selector | |
| M111 | 2 | Inverter |
| M112 | 5 | NOR gate |
| M113 | 7 | 10 x 2-Input NAND gates |
| M115 | 3 | 8 x 3-Input NAND gates |
| M116 | 3 | 6 x 4-Input NOR gates |
| M117 | 3 | 6 x 4-Input NAND gates |
| M119 | 2 | 3 x 8-Input NAND gates |
| M121 | 3 | AND/NOR gates |
| M141 | 2 | NAND/NOR gates |
| M149 | 10 | 9 x 2-NAND wired OR matrix |
| M161 | Binary to octal/decimal decoder | |
| M163 | Dual binary to decimal decoder | |
| M203 | 4 | 8 x SR flip-flops |
| M205 | 3 | 5 x 'D' flip-flops |
| M207 | J-K Flip-flops (3-3 configuration) | |
| M208 | 2 | 8-bit buffer shift register |
| M214 | 3 | 6-bit register |
| M216 | 5 | 6 x flip-flops |
| M236 | 12-bit binary up/down counter | |
| M238 | Synchronous 4-bit up/down counter | |
| M239 | 2 | 3 x 4-bit up/down counter/register |
| M304 | 3 | One shot delay |
| M307 | 3 | Integrating one shot |
| M405 | Crystal clock | |
| M611 | High speed power inverter | |
| M617 | 6 x 4-input NAND buffers | |
| M623 | 3 | Bus driver |
| M782 | Interrupt control | |
| M784 | 3 | UNIBUS receivers |
| M796 | UNIBUS master control | |
| M797 | Register select | |
| M798 | UNIBUS drivers | |
Double height boards:
- M795 - Word Count and Current Memory Address
Module Utilization Chart
The Flip Chip module utilization chart for the RK11-C backplane is as follows (* = Connector):
| Slot | A | B | C | D |
|---|---|---|---|---|
| 1 | UNIBUS in | |||
| 2 | UNIBUS out | |||
| 3 | ||||
| 4 | ||||
| 5 | M105 | M784 | ||
| 6 | M782 | M79 | ||
| 7 | M795 | |||
| 8 | M784 | M784 | ||
| 9 | M623 | M307 | ||
| 10 | Disk bus 2* | M623 | M307 | |
| 11 | M623 | M307 | ||
| 12 | Disk bus 1* | M207 | M163 | |
| 13 | M798 | G736 | G740 | M405 |
| 14 | M149 | M149 | M116 | M161 |
| 15 | M149 | M149 | M304 | M119 |
| 16 | M149 | M149 | M113 | M113 |
| 17 | M239 | M238 | M216 | M141 |
| 18 | M239 | M214 | M115 | M115 |
| 19 | M214 | M214 | M121 | M112 |
| 20 | M208 | M208 | M111 | M111 |
| 21 | M203 | M203 | M112 | M112 |
| 22 | M149 | M149 | M205 | M117 |
| 23 | M149 | M149 | M203 | M203 |
| 24 | M121 | M002 | M116 | M115 |
| 25 | M216 | M797 | M611 | M617 |
| 26 | M141 | M119 | M113 | M304 |
| 27 | M304 | M112 | M112 | M113 |
| 28 | M236 | M121 | M216 | M216 |
| 29 | M205 | M117 | M117 | |
| 30 | W130* | M113 | M113 | |
| 31 | 6775* | M113 | M205 | |
| 32 | 6775* | M116 | M216 | |
W130 = Maintenance board
6775 = Cable to indicator panel
Double Buffered RK11-C module count/location tables
The following tables give a listing of the Flip Chips used in the Double Buffered variant of the RK11-C, and their location in the backplane.
Module counts
(Drawn from module count chart):
| Type | Count | Function |
|---|---|---|
| G736 | Jumper | |
| G740 | Disk selection | |
| M002 | 3 | 15 Loads |
| M105 | Address selector | |
| M111 | 5 | Inverter |
| M112 | 7 | NOR gate |
| M113 | 10 | 10 x 2-Input NAND gates |
| M115 | 4 | 8 x 3-Input NAND gates |
| M116 | 3 | 6 x 4-Input NOR gates |
| M117 | 4 | 6 x 4-Input NAND gates |
| M119 | 2 | 3 x 8-Input NAND gates |
| M121 | 3 | AND-NOR gates |
| M141 | 2 | AND/NOR gates |
| M149 | 12 | 9x12 NAND wired OR matric |
| M161 | Binary to octal/decimal decoder | |
| M163 | Dual binary to decimal decoder | |
| M203 | 4 | SR flip-flops |
| M205 | 4 | 5 x 'D' flip-flops |
| M207 | Flip-flops (3-3 configuration) | |
| M208 | 6 | Buffer shift register |
| M214 | 3 | Data storage register |
| M216 | 5 | 6 x flip-flops |
| M236 | 12-bit binary up/down counter | |
| M238 | Synchronous 4-bit up/down counter | |
| M239 | 2 | 3 x 4-bit up/down counter/register |
| M304 | 5 | One shot delay |
| M307 | 3 | Integrating one shot |
| M405 | Crystal clock | |
| M606 | 2 | Pulse generator |
| M611 | High speed power inverter | |
| M617 | 6 x 4-input NOR buffers | |
| M623 | 3 | Bus driver |
| M782 | Interrupt control | |
| M784 | 3 | UNIBUS receivers |
| M796 | UNIBUS master control | |
| M797 | Register select | |
| M798 | UNIBUS drivers | |
Double height boards:
- M795 - Word Count and Current Memory Address
Module Utilization Chart
The Flip Chip module utilization chart for the RK11-C backplane is as follows (* = Connector):
| Slot | A | B | C | D |
|---|---|---|---|---|
| 1 | UNIBUS in | M606 | M113 | |
| 2 | UNIBUS out | M115 | M002 | |
| 3 | M149 | M149 | M208 | M208 |
| 4 | M111 | M002 | M205 | M113 |
| 5 | M105 | M784 | M208 | M208 |
| 6 | M782 | M796 | M304 | M304 |
| 7 | M795 | M606 | M112 | |
| 8 | M784 | M784 | M112 | M111 |
| 9 | M117 | M111 | M623 | M307 |
| 10 | Disk bus 2* | M623 | M307 | |
| 11 | M113 | M623 | M307 | |
| 12 | Disk bus 1* | M207 | M163 | |
| 13 | M798 | G736 | G740 | M405 |
| 14 | M149 | M149 | M116 | M161 |
| 15 | M149 | M149 | M304 | M119 |
| 16 | M149 | M149 | M113 | M113 |
| 17 | M239 | M238 | M216 | M141 |
| 18 | M239 | M214 | M115 | M115 |
| 19 | M214 | M214 | M121 | M112 |
| 20 | M208 | M208 | M111 | M111 |
| 21 | M203 | M203 | M112 | M112 |
| 22 | M149 | M149 | M205 | M117 |
| 23 | M149 | M149 | M203 | M203 |
| 24 | M121 | M002 | M116 | M115 |
| 25 | M216 | M797 | M611 | M617 |
| 26 | M141 | M119 | M113 | M304 |
| 27 | M304 | M112 | M112 | M113 |
| 28 | M236 | M121 | M216 | M216 |
| 29 | M205 | M117 | M117 | |
| 30 | W130* | M113 | M113 | |
| 31 | 6775* | M113 | M205 | |
| 32 | 6775* | M116 | M216 | |
W130 = Maintenance board (optional)
6775 = Cable to indicator panel
