Difference between revisions of "RP04 disk drive"
From Computer History Wiki
(Mention predecessor to RP05) |
(Add OEM model #) |
||
| Line 25: | Line 25: | ||
The '''RP04''' was the successor to the [[RP03 disk drive|RP03]] multi-[[platter]] large [[disk]] drive, and the predecessor to the later [[RP05 disk drive|RP05]]. It used a [[pack]] compatible with the [[IBM 3336]] pack, used on the [[IBM 3330]] drive. | The '''RP04''' was the successor to the [[RP03 disk drive|RP03]] multi-[[platter]] large [[disk]] drive, and the predecessor to the later [[RP05 disk drive|RP05]]. It used a [[pack]] compatible with the [[IBM 3336]] pack, used on the [[IBM 3330]] drive. | ||
| − | The actual drive was produced by the Information Storage Systems (ISS) division of Sperry Univac, and [[Original Equipment Manufacturer|OEM]]'d by [[DEC]], who added interface [[electronic]]s. | + | The actual drive was produced by the Information Storage Systems (ISS) division of Sperry Univac (a model 733-10), and [[Original Equipment Manufacturer|OEM]]'d by [[DEC]], who added interface [[electronic]]s. |
It was the first large drive to use the [[MASSBUS]] bus; thus, it did not have a specific [[device controller]], but used the appropriate MASSBUS controller. A maximum of 8 drives were supported per controller. | It was the first large drive to use the [[MASSBUS]] bus; thus, it did not have a specific [[device controller]], but used the appropriate MASSBUS controller. A maximum of 8 drives were supported per controller. | ||
Revision as of 23:02, 21 November 2018
| RP04 | |
| Manufacturer: | Sperry Univac ISS (basic drive), Digital Equipment Corporation (electronics) |
|---|---|
| Drive Controller(s): | RH10 (PDP-10) RH11 (UNIBUS) |
| Capacity: | 88 Mbytes |
| Transfer Rate: | 2.5 usec/word |
| Average Access Time: | 36.3 msec |
| Revolutions per Minute: | 3600 |
| 1/2 Revolution Time: | 8.3 msec |
| One Track Seek Time: | 7 msec |
| Average Seek Time: | 28 msec |
| Maximum Seek Time: | 50 msec |
| Total Surfaces: | 19 |
| Tracks per Surface: | 411 |
| Sectors per Track: | 22 |
| Words per Sector: | 256 |
| Density: | 4040 bpi (maximum) |
| Recording Method: | Modified Frequency Modulation (MFM) |
| Physical Size: | 31" W x 40" H x 32" L |
| Weight: | 600 pounds |
| Power Consumption: | 660 VA per phase (running); 3300 VA per phase (starting, 10 seconds max) |
The RP04 was the successor to the RP03 multi-platter large disk drive, and the predecessor to the later RP05. It used a pack compatible with the IBM 3336 pack, used on the IBM 3330 drive.
The actual drive was produced by the Information Storage Systems (ISS) division of Sperry Univac (a model 733-10), and OEM'd by DEC, who added interface electronics.
It was the first large drive to use the MASSBUS bus; thus, it did not have a specific device controller, but used the appropriate MASSBUS controller. A maximum of 8 drives were supported per controller.
