Difference between revisions of "KA11 changes for the KT11-B"

From Computer History Wiki
Jump to: navigation, search
(Print set: Add interface cable pinout (grouds only))
(KA/KT Interface: add signals)
Line 32: Line 32:
 
! Pin !! Source !! Signal
 
! Pin !! Source !! Signal
 
|-
 
|-
| A1 || ? || Ground
+
| A1 || - || Ground
 
|-
 
|-
 
| A2 || ? || xx
 
| A2 || ? || xx
 
|-
 
|-
| B1 || ? || xx
+
| B1 || KA11 || Odd address error
 
|-
 
|-
 
| B2 || ? || xx
 
| B2 || ? || xx
 
|-
 
|-
| C1 || ? || Ground
+
| C1 || - || Ground
 
|-
 
|-
| C2 || ? || Ground
+
| C2 || - || Ground
 
|-
 
|-
| D1 || ? || xx
+
| D1 || KT11 || PGC 04
 
|-
 
|-
| D2 || ? || xx
+
| D2 || KA11 || RTS
 
|-
 
|-
| E1 || ? || xx
+
| E1 || KA11 || DEST
 
|-
 
|-
| E2 || ? || xx
+
| E2 || KA11 || CLKT
 
|-
 
|-
| F1 || ? || Ground
+
| F1 || - || Ground
 
|-
 
|-
| F2 || ? || Ground
+
| F2 || - || Ground
 
|-
 
|-
| H1 || ? || xx
+
| H1 || KA11 || SOURCE
 
|-
 
|-
| H2 || ? || xx
+
| H2 || KA11 || -TRAPS
 
|-
 
|-
| J1 || ? || xx
+
| J1 || KA11 || ISR 12
 
|-
 
|-
| J2 || ? || Ground
+
| J2 || - || Ground
 
|-
 
|-
| K1 || ? || Ground
+
| K1 || - || Ground
 
|-
 
|-
| K2 || ? || xx
+
| K2 || KA11 || SERVICE
 
|-
 
|-
| L1 || ? || xx
+
| L1 || KA11 || ISR 7
 
|-
 
|-
| L2 || ? || Ground
+
| L2 || - || Ground
 
|-
 
|-
| M1 || ? || xx
+
| M1 || KA11 || -RTI
 
|-
 
|-
| M2 || ? || xx
+
| M2 || KA11 || TIME OUT
 
|-
 
|-
| N1 || ? || Ground
+
| N1 || - || Ground
 
|-
 
|-
| N2 || ? || Ground
+
| N2 || - || Ground
 
|-
 
|-
| P1 || ? || xx
+
| P1 || KA11 || JSR
 
|-
 
|-
| P2 || ? || xx
+
| P2 || KA11 || FETCH
 
|-
 
|-
| R1 || ? || Ground
+
| R1 || - || Ground
 
|-
 
|-
| R2 || ? || Ground
+
| R2 || - || Ground
 
|-
 
|-
| S1 || ? || xx
+
| S1 || KT11 || CLK NPR
 
|-
 
|-
| S2 || ? || xx
+
| S2 || KA11 || TRAP
 
|-
 
|-
| T1 || ? || Ground
+
| T1 || - || Ground
 
|-
 
|-
| T2 || ? || xx
+
| T2 || KA11 || [ST+SR] K13-3
 
|-
 
|-
 
| U1 || ? || xx
 
| U1 || ? || xx
Line 102: Line 102:
 
| V1 || ? || xx
 
| V1 || ? || xx
 
|-
 
|-
| V2 || ? || xx
+
| V2 || KT11 || Force timeout
 
|}
 
|}
 +
 +
(Signals partially in lower case are not formal names from the prints, but give a sense of what the signal does.)

Revision as of 00:05, 22 August 2016

The KT11-B Paging Option for the PDP-11/20 involves some modifications to the KA11 CPU. Those changes are documented in a DEC print set, 7605961-0, "Central Processor for KT11-B".

Alas, there's only one known set of these prints for the KT11-B changes to the KA11 - and that set is missing a page: "PC Board Modifications", D-AP-7605961-0-10.

Luckily, there is probably just duplicate information elsewhere (including a hand-modified set of KA11 prints, showing the changes to suppport the KT11-B) to allow it to be reproduced.

Print set

The following prints are included in the "Central Processor for KT11-B" set:

Drawing Sheets Title
D-CS-7605961-0-3 3 State Control - M727 K2
D-CS-7605961-0-4 3 Priority - M824 K3
D-CS-7605961-0-5 5 Bus Interface & Instruction Register - M725 K9
D-CS-7605961-0-6 4 Instruction Register Decode - M726 K10
D-CS-7605961-0-7 3 Flag Control - M822 K12
D-CS-7605961-0-8 4 Bus & Console Control - M724 K13

KA/KT Interface

The KA11 and KT11-B are connected by a single cable which carries specific signals, as well as the UNIBUS. On the KT11 end, it plugs into slot D12, and on the KA11 end, into slot B09. The cable pinout is:

Pin Source Signal
A1 - Ground
A2  ? xx
B1 KA11 Odd address error
B2  ? xx
C1 - Ground
C2 - Ground
D1 KT11 PGC 04
D2 KA11 RTS
E1 KA11 DEST
E2 KA11 CLKT
F1 - Ground
F2 - Ground
H1 KA11 SOURCE
H2 KA11 -TRAPS
J1 KA11 ISR 12
J2 - Ground
K1 - Ground
K2 KA11 SERVICE
L1 KA11 ISR 7
L2 - Ground
M1 KA11 -RTI
M2 KA11 TIME OUT
N1 - Ground
N2 - Ground
P1 KA11 JSR
P2 KA11 FETCH
R1 - Ground
R2 - Ground
S1 KT11 CLK NPR
S2 KA11 TRAP
T1 - Ground
T2 KA11 [ST+SR] K13-3
U1  ? xx
U2  ? Ground
V1  ? xx
V2 KT11 Force timeout

(Signals partially in lower case are not formal names from the prints, but give a sense of what the signal does.)