Difference between revisions of "UNIBUS backplanes"

From Computer History Wiki
Jump to: navigation, search
(A-F 'connectors')
m (External links: +Douglas Electronics)
Line 16: Line 16:
  
 
Other manufacturers, including Plessey, also produced UNIBUS backplanes, such as the Plessey PM-D11/SPC-1, a 9-slot unit.
 
Other manufacturers, including Plessey, also produced UNIBUS backplanes, such as the Plessey PM-D11/SPC-1, a 9-slot unit.
 +
 +
==External links==
 +
 +
* [http://www.douglas.com/ Douglas Electronics] still sells extender cards for DEC backplanes
 +
** [http://www.douglas.com/index.php/6-de-11.html DE-11 dual extender]
 +
** [http://www.douglas.com/index.php/6-de-8.html DE-8 quad extender]
  
 
[[Category: UNIBUS]]
 
[[Category: UNIBUS]]
 
[[Category: DEC Hardware]]
 
[[Category: DEC Hardware]]

Revision as of 16:25, 9 April 2022

UNIBUS backplanes from DEC, the DD11 backplanes, were system units which were normally installed in a BA11 mounting box. (Some CPU and device backplanes also had UNIBUS slots.)

They came in several different generations: the earliest ones provided only quad Small Peripheral Controller slots; later ones also provided hex Modified UNIBUS Device slots (along with two SPC slots, in the end slots, where the UNIBUS entered and left the backplane on BC11A cables)).

Each slot held six 'connectors', DEC's term for a group of edge connector pins, denominated 'A'-'F'.

The earliest one, the DD11-A (used in the PDP-11/20) got its power through a paddle card which plugged into the 3A slot/connector. All the later ones used one or more standard DEC power distribution connectors.

They were:

Other manufacturers, including Plessey, also produced UNIBUS backplanes, such as the Plessey PM-D11/SPC-1, a 9-slot unit.

External links