Difference between revisions of "MicroVAX 2000"
m (→Memory Options: MS400 Link name changed) |
(→Memory Options: Link changed) |
||
| Line 42: | Line 42: | ||
Only one MS400 memory module may be connected to a [[KA410-A]] system module, which has 2MB on-board memory. | Only one MS400 memory module may be connected to a [[KA410-A]] system module, which has 2MB on-board memory. | ||
| − | * [[MS400 MicroVAX 2000/VAXstation Memory Module|MS400]]-AA 2MB [[#ref_2|[2]]] | + | * [[MS400 MicroVAX 2000/VAXstation 2000 Memory Module|MS400]]-AA 2MB [[#ref_2|[2]]] |
* MS400-BA 4MB [[#ref_2|[2]]] | * MS400-BA 4MB [[#ref_2|[2]]] | ||
* MS400-CA 12MB [[#ref_8|[8]]] | * MS400-CA 12MB [[#ref_8|[8]]] | ||
Revision as of 08:50, 13 August 2022
Contents
MicroVAX 2000 Systems
| MicroVAX 2000 | |
| Summary | |
|---|---|
| Codename: | Teammate |
| OS support (VMS): | V4.5B |
| CPU Details | |
| CPU name (VMS): | KA410 |
| CPU name (console): | KA410-A |
| CPU module: | KA410 |
| Number of processors: | 1 |
| VMS DCL CPU: | 8 |
| VMS DCL XCPU: | 4 |
| SID: | 08000000 |
| XSID: | 04040001 |
| CPU chip: | DC333 |
| FPU chip: | DC337 [2] |
| CPU technology: | ZMOS |
| CPU cycle time: | 200ns [2] |
| CPU clock: | 40MHz [2] |
| Instruction-buffer: | 8 bytes [3] |
| Cache: | None |
| Memory | |
| Minimum memory: | 2MB [2] |
| Maximum memory: | 16MB [2] |
| Physical address lines: | 30 [2] |
| Memory checking: | Byte parity [2] |
| On-board memory: | 2MB [2] |
| I/O | |
| Max I/O throughput: | 3.3MB/s |
| LAN support: | Optional: DESVA ThinWire Ethernet Option |
| Performance | |
| VUPs: | 0.9 |
MicroVAX 2000 Parts & Options
Power Supply
Memory Options
Only one MS400 memory module may be connected to a KA410-A system module, which has 2MB on-board memory.
Mass Storage Options
- RX33 5.25" Floppy Drive
- RD32 42MB Disk Drive
- RD53 71MB Disk Drive
- RD54 159MB Disk Drive
- TK50 96MB Cartridge Tape Drive
Communication Options
- DHT32 Asynchronous Serial Line Option [5]
- DSH32 Synchronous/Asynchronous Serial Line Option [6]
- DST32 Synchronous Serial Line Option [7]
- DESVA VAXstation 2000 / MicroVAX 2000 ThinWire Ethernet Option [2]
Expansion Boxes
- BA40A Expansion Adapter
- TK50Z-F Tape Expansion Box
- RD53-F Disk Expansion Box
- RD54-F Disk Expansion Box
You need the BA40A expansion adapter to connect any of the expansion boxes, but only one adapter is needed for two boxes.
The expansion box houses either a tape drive or a fixed disk drive and is shipped with a drive cable. The drive cable connects the expansion box to the MicroVAX 2000 / VAXstation 2000 system unit's expansion adapter. The expansion adapter must already be installed on the bottom of the MicroVAX 2000 / VAXstation 2000 system unit before the expansion box is connected.
You may install a total of two expansion boxes (one with a fixed disk and one with a tape drive). If you are installing more than one expansion box, first install the expansion box with the tape drive, and then install the expansion box with the fixed disk.
