Difference between revisions of "RP06 disk drive"
From Computer History Wiki
m (+New cat) |
m (link phase) |
||
Line 20: | Line 20: | ||
| physical size = 33" W x 47" H x 32" L | | physical size = 33" W x 47" H x 32" L | ||
| weight = 600 pounds | | weight = 600 pounds | ||
− | | power consumption = 660 VA per phase (running); 3300 VA per phase (starting, 10 seconds max) | + | | power consumption = 660 VA per [[phase]] (running); 3300 VA per phase (starting, 10 seconds max) |
}} | }} | ||
Latest revision as of 13:33, 15 August 2024
RP06 | |
Manufacturer: | Memorex (basic drive), Digital Equipment Corporation (electronics) |
---|---|
Drive Controller(s): | RH10 (PDP-10) RH20 (KL10) RH11 (UNIBUS) RH70 (PDP-11/70) RH780 (VAX-11/780) RH750 (VAX-11/750) |
Capacity: | 176 Mbytes |
Transfer Rate: | 806 KB/s (peak) |
Average Access Time: | 38.3 msec |
Revolutions per Minute: | 3600 |
1/2 Revolution Time: | 8.3 msec |
One Track Seek Time: | 10 msec |
Average Seek Time: | 30 msec |
Total Surfaces: | 20 (19 data, 1 servo) |
Tracks per Surface: | 815 |
Sectors per Track: | 22 |
Words per Sector: | 256 |
Tracks per Inch: | 384 |
Density: | 4040 bpi (maximum) |
Recording Method: | Modified Frequency Modulation (MFM) |
Physical Size: | 33" W x 47" H x 32" L |
Weight: | 600 pounds |
Power Consumption: | 660 VA per phase (running); 3300 VA per phase (starting, 10 seconds max) |
The RP06 was the successor to the RP04 and RP05 multi-platter large disk drives. The actual drive was a Memorex 677-01, OEM'd by DEC, who added interface electronics.
As a MASSBUS device, it did not have a specific device controller, but used the appropriate MASSBUS controller. A maximum of 8 drives were supported per controller; drives could be dual-ported, to allow access from two different controllers.
The block headers are protected by a CRC, and the data by an ECC.