MXV11-B Multifunction Option Module
The MXV11-B Multifunction Option Module is a QBUS dual-height peripheral board (M7195), intended to allow the creation of complete systems in a minimal-sized QBUS backplane. It is very similar to the earlier MXV11-A Multifunction Option Module, except that it is a Q22 device.
It contains two asynchronous serial lines (using the DL11 programming standard), an optional clock, a block of main memory, and some PROM for bootstrap purposes. The serial lines are connected via 10-pin Berg connector headers on the top edge of the card, using the standard DEC asynchronous serial line pinout, and line 1 can be set to halt or boot the machine on a break.
The clock is program compatible with the KW11-L Line Time Clock, but it is not a line time clock, since it cannot be driven from AC wall power; it can be connected to 50Hz, 60Hz, or 800Hz clock signals from a divided-down 20MHz crystal which is also used to provide the clock to the serial lines.
The board contains 128Kbytes of RAM; it can hold a pair of 2, 4, 8 or 16KB ROMs.
See also
External links
- MXV11-B Multi-Function Option Module User Guide (EK-MXV1B-UG-001)
- Microcomputer Products Handbook - the MXV11-B is covered on pp. 18–1-18 (pp. 253-270 of the PDF)
- Disabling RAM on the MXV11-BF (uNOTE #019)
- MXV11-B Multifunction Option Module
- Multifunction Modules
