Amiga

From Computer History Wiki
Revision as of 21:59, 20 September 2009 by Neozeed (talk | contribs)
Jump to: navigation, search

The Amiga, which was sold by Commodore was one of the most underrated computers of the 1990's.

The amiga was designed by Jay Minor and was originally developed as the Loraine under the brand 'Hitoro'. The Amiga is noted for it's use of the 68000 cpu, and a set of custom coprocessors.

Originally Atari had funded the later stages of the Amiga's development but they had lowballed the final price. HiToro shopped themselves, and Commodore had found an opportunity to snatch the next generation machine from Atari.

Models

Amiga 1000

The Amiga 1000 was the first model to ship from Commodore.

Amiga 500

The Amiga 500 was a Commodore 64 style influenced Amiga. It included 512kb of system ram, and a single floppy drive built in. The chipset used in the Amiga 500 would be known as the 'OCS'.

Amiga 600

This should have been a low cost version of the 500, with the updated ECS chipset, however it wound up costing more then the Amiga 500. This was to replace the 500, at the time of the 1200's release.

Amiga 1200

The Amiga 1200 used a 68020 cpu, and the new AGA chipset that also shipped in the Amiga 4000. It also was a single 'wedge' like the Amiga 600/500.

Amiga 1500

This Amiga was a desktop model that did NOT include any ISA slots preventing the bridgeboard upgrade. Otherwise it's identical in specs to the Amiga 2000.

Amiga 2000

The Amiga 2000 was a desktop version of the Amiga 500. It featured Zoro expansion slots, the same 68000 cpu, and 1mb of ram as standard. The 2000 also included some 16bit and 8bit ISA slots allowing a bridgeboard card for IBM XT/AT emulation, and the ability to use IBM PC cards

Amiga 2000HD

The Amiga 2000HD was a Amiga 2000 that included a hard disk that had been installed at the factory. Otherwise it was the same as an Amiga 2000.

Amiga 3000

The Amiga 3000 was a 68030 Amiga that used the ECS chipset, and was fully 32bit.

Amiga 3000UX

The 3000UX was an Amiga 3000 that included a SCSI tape drive, and came with Commodore's SYSVr4 port. This model could have saved the company as SUN wanted to rebrand the machine, and make MILLIONS with it. Naturally Commodore declined such a deal.

Amiga 3000T

Amiga 4000

Amiga 4000T