MB20 core memory

The MB20 was a core main memory system for the later PDP-10s, principally the mid-period KL10. An MB20 contained up to four memory controllers, each with up to four 32KW storage modules, for a maximum of 512KW; parity is provided to protect the memory contents. The access time is 1.04 µseconds, and the cycle time is 1.92 µseconds (both for the first word in a 4-word block, using four-way interleaving).

It connected to the KL10's so-called internal memory bus, the S-Bus; controllers 0 and 1 are connected to S-Bus 0, and controllers 2 and 3 to S-Bus 1. For interleaving, each controller is configured as to which addresses (out of the 4 in an S-Bus block) it will respond to; both 2-way and 4-way interleaving require controllers to be set to 'odd' or 'even'. In 4-way interleaving, in addition to two controllers being actuated at the same time, each controller can start two modules reading at the same time.