DTE20 Ten-Eleven Interface

From Computer History Wiki
Revision as of 21:58, 14 October 2021 by Jnc (talk | contribs) (External links: +Eng drw)
Jump to: navigation, search

The DTE20 Ten-Eleven Interface (also called the DTE20 Console Processor Interface) is a peripheral on KL10 CPUs which allows a PDP-11 to act as a front end. Depending on how the DTE20 is configured ('restricted' or 'privileged'), it can be just for off-loading I/O functionality to the PDP-11 (both to reduce the load on the main CPU, but also to allow access to the wide range of peripherals supported on the PDP-11), or it can also function as a control and diagnostic system for the main CPU: loading microcode, bootstrapping, etc.

The PDP-11 and KL10 are able to examine each other's main memory (limited on the KL10 side for restricted DTE20's), and interrupt each other.

A KL10 may have up to 4 DTE20's, and a PDP-11 may host up to 4 DTE20's on different kL10's.

Implementation

The DTE20 is connected to the EBox of the KL10 via the EBus; privileged DTE20's also have access to the KL10's diagnostic bus. To the PDP-11, it appears as a normal UNIBUS peripheral.

A 'restricted' DTE20 consists of a pair of hex boards (M8552, M85553) and a dual card (M8554), plugged into an I/O backplane of the KL10 (along with the RH20s). These are connected to a UNIBUS connector mounted lower down in that rack, and a BC11A cable from the PDP-11 (usually a PDP-11/40) plugs into that.

External links