32v 1m stty

STTY(1) UNIX Programmer's Manual STTY(1)

NAME

    stty - set terminal options

SYNOPSIS

    stty [ option ... ]

DESCRIPTION

    _S_t_t_y sets certain I/O options on the current output termi-
    nal.  With no argument, it reports the current settings of
    the options.  The option strings are selected from the fol-
    lowing set:

    even    allow even parity
    -even   disallow even parity
    odd     allow odd parity
    -odd    disallow odd parity
    raw     raw mode input (no erase, kill, interrupt, quit,
            EOT; parity bit passed back)
    -raw    negate raw mode
    cooked  same as `-raw'
    cbreak  make each character available to _r_e_a_d(2) as
            received; no erase and kill
    -cbreak make characters available to _r_e_a_d only when newline
            is received
    -nl     allow carriage return for new-line, and output CR-LF
            for carriage return or new-line
    nl      accept only new-line to end lines
    echo    echo back every character typed
    -echo   do not echo characters
    lcase   map upper case to lower case
    -lcase  do not map case
    -tabs   replace tabs by spaces when printing
    tabs    preserve tabs
    ek      reset erase and kill characters back to normal # and
            @
    erase _c set erase character to _c.
    kill _c  set kill character to _c.
    cr0 cr1 cr2 cr3
            select style of delay for carriage return (see
            _i_o_c_t_l(2))
    nl0 nl1 nl2 nl3
            select style of delay for linefeed
    tab0 tab1 tab2 tab3
            select style of delay for tab
    ff0 ff1 select style of delay for form feed
    bs0 bs1 select style of delay for backspace
    tty33   set all modes suitable for the Teletype Corporation
            Model 33 terminal.
    tty37   set all modes suitable for the Teletype Corporation
            Model 37 terminal.
    vt05    set all modes suitable for Digital Equipment Corp.
            VT05 terminal
    tn300   set all modes suitable for a General Electric Ter-
            miNet 300
    ti700   set all modes suitable for Texas Instruments 700
            series terminal
    tek     set all modes suitable for Tektronix 4014 terminal
    hup     hang up dataphone on last close.
    -hup    do not hang up dataphone on last close.
    0       hang up phone line immediately
    50 75 110 134 150 200 300 600 1200 1800 2400 4800 9600 exta extb
            Set terminal baud rate to the number given, if pos-
            sible.  (These are the speeds supported by the DH-11
            interface).

SEE ALSO

    ioctl(2), tabs(1)