DR11-L general-purpose interface

From Computer History Wiki
Revision as of 20:25, 16 April 2020 by Jnc (talk | contribs) (fix img fie name)
Jump to: navigation, search
DR11-L board

The DR11-L general-purpose interface was a UNIBUS device controller which provided a pair of 16-bit parallel ports, both input-only. It was a quad format card (M7864), and used an SPC slot; it used programmed I/O.

Connection to the user's device is via a pair of 40-pin Berg connectors; each is controlled by a separate set of registers (identical for the two connectors).

The DR11-L is roughly an input-only version of the earlier DR11-C general device interface, but is not program compatible with the DR11-C.

Retrieved from "https://gunkies.org/w/index.php?title=DR11-L_general-purpose_interface&oldid=22170"