Difference between revisions of "DTE20 Ten-Eleven Interface"
(+boards) |
m (→External links: +Eng drw) |
||
| Line 14: | Line 14: | ||
* [http://www.bitsavers.org/pdf/dec/pdp10/KL10/EK-DTE20-UD-003_Oct76.pdf DTE20 Ten-Eleven Interface Unit Description] | * [http://www.bitsavers.org/pdf/dec/pdp10/KL10/EK-DTE20-UD-003_Oct76.pdf DTE20 Ten-Eleven Interface Unit Description] | ||
| + | * [http://bitsavers.org/pdf/dec/pdp10/KL10/MP00301_KL10PV_Jun80.pdf KL10-PV Field Maintenance Print Set] - Contains DTE20 on pp. 403-461 | ||
* [http://www.bitsavers.org/pdf/dec/pdp10/KL10/EK-108OU-PD-002_KL10-Based_Physical_Description_Mar77.pdf KL10-Based Physical Description] - contains images of DTE20 backplanes and wiring, pp. 3-7-3-11; board configuration, pp. 3-27,3-28 | * [http://www.bitsavers.org/pdf/dec/pdp10/KL10/EK-108OU-PD-002_KL10-Based_Physical_Description_Mar77.pdf KL10-Based Physical Description] - contains images of DTE20 backplanes and wiring, pp. 3-7-3-11; board configuration, pp. 3-27,3-28 | ||
[[Category: PDP-10s]] | [[Category: PDP-10s]] | ||
Revision as of 22:58, 14 October 2021
The DTE20 Ten-Eleven Interface (also called the DTE20 Console Processor Interface) is a peripheral on KL10 CPUs which allows a PDP-11 to act as a front end. Depending on how the DTE20 is configured ('restricted' or 'privileged'), it can be just for off-loading I/O functionality to the PDP-11 (both to reduce the load on the main CPU, but also to allow access to the wide range of peripherals supported on the PDP-11), or it can also function as a control and diagnostic system for the main CPU: loading microcode, bootstrapping, etc.
The PDP-11 and KL10 are able to examine each other's main memory (limited on the KL10 side for restricted DTE20's), and interrupt each other.
A KL10 may have up to 4 DTE20's, and a PDP-11 may host up to 4 DTE20's on different kL10's.
Implementation
The DTE20 is connected to the EBox of the KL10 via the EBus; privileged DTE20's also have access to the KL10's diagnostic bus. To the PDP-11, it appears as a normal UNIBUS peripheral.
A 'restricted' DTE20 consists of a pair of hex boards (M8552, M85553) and a dual card (M8554), plugged into an I/O backplane of the KL10 (along with the RH20s). These are connected to a UNIBUS connector mounted lower down in that rack, and a BC11A cable from the PDP-11 (usually a PDP-11/40) plugs into that.
External links
- DTE20 Ten-Eleven Interface Unit Description
- KL10-PV Field Maintenance Print Set - Contains DTE20 on pp. 403-461
- KL10-Based Physical Description - contains images of DTE20 backplanes and wiring, pp. 3-7-3-11; board configuration, pp. 3-27,3-28
