Difference between revisions of "DTE20 Ten-Eleven Interface"
m (→External links: new cat) |
m (minor clarifications) |
||
| Line 1: | Line 1: | ||
| − | The '''DTE20 Ten-Eleven Interface''' (also called the '''DTE20 Console Processor Interface''') is a [[peripheral]] on [[KL10]] [[Central Processing Unit|CPUs]] which allows a [[PDP-11]] to act as a [[front end]]. Depending on how the DTE20 is configured ('restricted' or 'privileged'), it can be just for off-loading [[input/output|I/O]] functionality to the PDP-11 (both to reduce the load on the main CPU, but also to allow access to the wide range of peripherals supported on the PDP-11) | + | The '''DTE20 Ten-Eleven Interface''' (also called the '''DTE20 Console Processor Interface''') is a [[peripheral]] on [[KL10]] [[Central Processing Unit|CPUs]] which allows a [[PDP-11]] to act as a [[front end]]. Depending on how the DTE20 is configured ('restricted' or 'privileged'), it can be just for off-loading [[input/output|I/O]] functionality to the PDP-11 (both to reduce the load on the main CPU, but also to allow access to the wide range of peripherals supported on the PDP-11); or it can also function as a control and [[diagnostic]] system for the main CPU: loading [[microcode]], [[bootstrap]]ping, etc. |
| − | The PDP-11 and KL10 are able to examine each other's [[main memory]] (limited on the KL10 side for restricted DTE20's), and [[interrupt]] each other. | + | The PDP-11 and KL10 are able to examine each other's [[main memory]] (in a limited way on the KL10 side, for restricted DTE20's), and [[interrupt]] each other. |
| − | A KL10 may have up to 4 DTE20's, and a PDP-11 may host up to 4 DTE20's on different | + | A KL10 may have up to 4 DTE20's, and a PDP-11 may host up to 4 DTE20's on different KL10's. |
==Implementation== | ==Implementation== | ||
| − | The DTE20 is connected to the EBox of the KL10 via the EBus; privileged DTE20's also have access to the KL10's | + | The DTE20 is connected to the EBox of the KL10 via the EBus; privileged DTE20's also have access to the diagnostic section of the KL10's Ebus. To the PDP-11, it appears as a normal [[UNIBUS]] peripheral. |
A 'restricted' DTE20 consists of a pair of [[DEC card form factor|hex]] boards (M8552, M8553) and a dual card (M8554), plugged into an I/O backplane of the KL10 (along with the [[RH20 MASSBUS controller|RH20s]]). These are connected to a [[UNIBUS]] connector mounted lower down in that rack, and a [[BC11A UNIBUS cable|BC11A]] cable from the PDP-11 (usually a [[PDP-11/40]]) plugs into that. | A 'restricted' DTE20 consists of a pair of [[DEC card form factor|hex]] boards (M8552, M8553) and a dual card (M8554), plugged into an I/O backplane of the KL10 (along with the [[RH20 MASSBUS controller|RH20s]]). These are connected to a [[UNIBUS]] connector mounted lower down in that rack, and a [[BC11A UNIBUS cable|BC11A]] cable from the PDP-11 (usually a [[PDP-11/40]]) plugs into that. | ||
Revision as of 14:16, 27 October 2022
The DTE20 Ten-Eleven Interface (also called the DTE20 Console Processor Interface) is a peripheral on KL10 CPUs which allows a PDP-11 to act as a front end. Depending on how the DTE20 is configured ('restricted' or 'privileged'), it can be just for off-loading I/O functionality to the PDP-11 (both to reduce the load on the main CPU, but also to allow access to the wide range of peripherals supported on the PDP-11); or it can also function as a control and diagnostic system for the main CPU: loading microcode, bootstrapping, etc.
The PDP-11 and KL10 are able to examine each other's main memory (in a limited way on the KL10 side, for restricted DTE20's), and interrupt each other.
A KL10 may have up to 4 DTE20's, and a PDP-11 may host up to 4 DTE20's on different KL10's.
Implementation
The DTE20 is connected to the EBox of the KL10 via the EBus; privileged DTE20's also have access to the diagnostic section of the KL10's Ebus. To the PDP-11, it appears as a normal UNIBUS peripheral.
A 'restricted' DTE20 consists of a pair of hex boards (M8552, M8553) and a dual card (M8554), plugged into an I/O backplane of the KL10 (along with the RH20s). These are connected to a UNIBUS connector mounted lower down in that rack, and a BC11A cable from the PDP-11 (usually a PDP-11/40) plugs into that.
External links
- DTE20 Ten-Eleven Interface Unit Description
- KL10-PV Field Maintenance Print Set - Contains DTE20 on pp. 403-461
- KL10-Based Physical Description - contains images of DTE20 backplanes and wiring, pp. 3-7-3-11; board configuration, pp. 3-27,3-28
